[Q] [Nook HD+] Unable to boot CM10.1 rom, just boot to CWM always

[ndttung8487]

I install CWM and CM 10.1 on native emmc as verygreen's instruction here: http://forum.xda-developers.com/showthread.php?t=2263553
My fault is that i formatted /emmc , /bootdata, /factory partition and now it just boot to CWM only, even i try to instal CM 10.1 many times. Can someone help me out of this? Thank you so much.

 

[leapinlar]

I install CWM and CM 10.1 on native emmc as verygreen's instruction here: http://forum.xda-developers.com/showthread.php?t=2263553
My fault is that i formatted /emmc , /bootdata, /factory partition and now it just boot to CWM only, even i try to instal CM 10.1 many times. Can someone help me out of this? Thank you so much.

You messed up. Formatting /rom and /factory bricked your device. It needs those there to be able to boot normally. I'm not sure if it can be repaired. Ordinarily it can repair itself with stock recovery, but you replaced stock recovery with CWM and it needs /factory to to it.

I think you are hosed.

You might be able to boot to CM on SD someday, but not without significant manual repair first.

Sent from my Nook HD+ running CM10.1 on emmc.

 

[ndttung8487]

You messed up. Formatting /rom and /factory bricked your device. It needs those there to be able to boot normally. I'm not sure if it can be repaired. Ordinarily it can repair itself with stock recovery, but you replaced stock recovery with CWM and it needs /factory to to it.

I think you are hosed.

You might be able to boot to CM on SD someday, but not without significant manual repair first.

Sent from my Nook HD+ running CM10.1 on emmc.

Thank you so much leapinlar
This device is my present from relation live in us. but i'm half way of the earth from them!!
So, beside using SDCard boot, can you help me to find stock recovery? Thank you so much!

 

[leapinlar]

Try this link:

http://d-h.st/k0O

and flash it with CWM. It will put stock recovery back on emmc, but without /factory, it still cannot repair itself without more work.

Sent from my Nook HD+ running CM10.1 on emmc.

 

[ndttung8487]

Try this link:


and flash it with CWM. It will put stock recovery back on emmc, but without /factory, it still cannot repair itself without more work.

Sent from my Nook HD+ running CM10.1 on emmc.

so from now on my device just can boot from sdcard only? thank you so much for your help leapinlar.
Can you help me fix this?

 

[leapinlar]

so from now on my device just can boot from sdcard only? thank you so much for your help leapinlar.
Can you help me fix this?

No, you might be able to still boot on emmc.

But you need to PM me with your serial number so I can make you a repair zip to flash. Don't flash that stock recovery yet. Try my zip first.

Edit: It is after 11pm here now so if you PM me with the serial number, I will send you a link in the morning.

Sent from my Nook HD+ running CM10.1 on emmc.

 

[ndttung8487]

No, you might be able to still boot on emmc.

But you need to PM me with your serial number so I can make you a repair zip to flash. Don't flash that stock recovery yet. Try my zip first.

Edit: It is after 11pm here now so if you PM me with the serial number, I will send you a link in the morning.

Sent from my Nook HD+ running CM10.1 on emmc.

yes, here is 1'40pm, i still at work, i'll post sn when i get home, thanks again for your help leapinlar!

EDIT:I got this SN on the box: 302.476.029.722.4301

 

[[email protected]]

I have a same kind problem

I also formatted /bootdata /system /cache /data /emmc at mounts and storage menu in cwm recovery. now I see my nook boot with "nook"charcter. finally finished with"install failed"

So I try to restored with backup files of cwm backup. but still failed.

I live in S.Korea. Please help me

 

[leapinlar]

yes, here is 1'40pm, i still at work, i'll post sn when i get home, thanks again for your help leapinlar!

EDIT:I got this SN on the box: 302.476.029.722.4301

I just sent you a Private Message (PM) with a link for a customized repair zip. Flash that. Then try rebooting, it should boot to CM10.1 unless you wiped it out too. If you did, reflash the CM10.1 zip too.

And go to verygreen's thread and flash his newest emmc CWM (v2). It removes the ability to format /rom and /factory.

Sent from my Nook HD+ running CM10.1 on emmc.

---------- Post added at 07:49 AM ---------- Previous post was at 07:36 AM ----------

I also formatted /bootdata /system /cache /data /emmc at mounts and storage menu in cwm recovery. now I see my nook boot with "nook"charcter. finally finished with"install failed"

So I try to restored with backup files of cwm backup. but still failed.

I live in S.Korea. Please help me

You do not have the same issue as the prior user since you did not format /rom and /factory.

You tried to restore a stock backup you had made prior to formatting those partitions? That should have fixed it.

Try flashing my plain 2.1.0 stock zip linked in my HD/HD+ CWM thread linked in my signature.

Sent from my Nook HD+ running CM10.1 on emmc.

 

[ndttung8487]

I just sent you a Private Message (PM) with a link for a customized repair zip. Flash that. Then try rebooting, it should boot to CM10.1 unless you wiped it out too. If you did, reflash the CM10.1 zip too.

And go to verygreen's thread and flash his newest emmc CWM (v2). It removes the ability to format /rom and /factory.

Sent from my Nook HD+ running CM10.1 on emmc.

---------- Post added at 07:49 AM ---------- Previous post was at 07:36 AM ----------

You do not have the same issue as the prior user since you did not format /rom and /factory.

You tried to restore a stock backup you had made prior to formatting those partitions? That should have fixed it.

Try flashing my plain 2.1.0 stock zip linked in my HD/HD+ CWM thread linked in my signature.

Sent from my Nook HD+ running CM10.1 on emmc.

I had no luck, as my step is:
- Put your file, CM10.1 emmc and gapps to sdcard, and insert to nook hd+ then power on, after it boot to cwm, i try to mount sdcard and install your file 2 times
- After install, i install again CM10.1 emmc of verygreen and gapps to, then reboot, it still go to CWM.
Any solutions leapinlar? Thank you very much

 

[leapinlar]

I had no luck, as my step is:
- Put your file, CM10.1 emmc and gapps to sdcard, and insert to nook hd+ then power on, after it boot to cwm, i try to mount sdcard and install your file 2 times
- After install, i install again CM10.1 emmc of verygreen and gapps to, then reboot, it still go to CWM.
Any solutions leapinlar? Thank you very much

You have not even downloaded my file, how could you have flashed it? Look in Private Messages.

Sent from my Nook HD+ running CM10.1 on emmc.

 

[ndttung8487]

You have not even downloaded my file, how could you have flashed it? Look in Private Messages.

Sent from my Nook HD+ running CM10.1 on emmc.

Yes! I've downloaded already! and put it in my sdcard! from link you gave me in pm

 

[leapinlar]

Yes! I've downloaded already! and put it in my sdcard! from link you gave me in pm

What is the title of the file you downloaded? And did it flash successfully?

Edit: I got your PM. That is the right file. Did it flash successfully? And you are taking out the SD when you boot, right?

Edit2: ok, lets use the forum now rather than PM. Flash that first zip that puts stock recovery back on and boot without any SD in.

Sent from my Nook HD+ running CM10.1 on emmc.

 

[ndttung8487]

What is the title of the file you downloaded? And did it flash successfully?

Edit: I got your PM. That is the right file. Did it flash successfully? And you are taking out the SD when you boot, right?

Sent from my Nook HD+ running CM10.1 on emmc.

I used CWM that I already installed before in device, SD card i use just my normal SD card, not bootable SD card.

 

[leapinlar]

I used CWM that I already installed before in device, SD card i use just my normal SD card, not bootable SD card.

Ok, I found the problem in my zip. I will make you a new one and post link in PM.

Sent from my Nook HD+ running CM10.1 on emmc.

 

[ndttung8487]

Ok, I found the problem in my zip. I will make you a new one and post link in PM.

Sent from my Nook HD+ running CM10.1 on emmc.

Thank you leapinlar! So i will postpone flash stock recovery and wait for you

 

[ndttung8487]

After all, I proud to say that my device back to life! Million thanks to leapinlar! You're genius!
I will more careful with these faulty and continue enjoy my HD+,
Again, leapinlar! You save my life! Thank you very much!!!!! So happy now
BTW, I live in vietnam! Nice to meet you.

 

[leapinlar]

After all, I proud to say that my device back to life! Million thanks to leapinlar! You're genius!
I will more careful with these faulty and continue enjoy my HD+,
Again, leapinlar! You save my life! Thank you very much!!!!! So happy now
BTW, I live in vietnam! Nice to meet you.

Greetings from USA. You're welcome.

Sent from my Nook HD+ running CM10.1 on emmc.

 

[[email protected]]

congraturation ndttung8487 . but my nook still can't boot

I also install CWM emmc and CM 10.1 on native emmc after wipe date.....etc so nook unstable.therefore I formatted every single partitions(ex: bootdata.....emmc) and reflashing cm 10.1 on emmc.and cwm emmc. I had saw boot as ndttung8487 situation once but I did more work....(can't remember) maybe I flashed 2.0.0 stock.zip by sdcard. and maybe I removed emmc recovery. so my nook condition is differrent from ndttung8487.

leapinlar. I already flashing 2.1.0 plain stock zip as you wrote but it still can't boot

I sent PM to you again. please read and please save nook

----------------------------------------------------------
I just junior member first day. so I can't add reply continually. forgive this

please read my mail again I sent mail again(I wrote it behaves when booting) few minutes ago

I formatted every partition. /bootdata /system /cache /data /emmc. I was dumb

 

[leapinlar]

I also install CWM and CM 10.1 on native emmc after wipe date.....etc I had saw boot as ndttung8487 situation but i did more work....(cant't remember) but my nook condition is differrent from ndttung8487.

already flashing 2.1.0 plain stock zip. but can't boot

Explain more what you wiped, and how it behaves when booting.

Sent from my Nook HD+ running CM10.1 on emmc.