[Q] overclock with stock rom[solved]

[cyrusct82]

I have rooted my Defy+ with BL7, installed 2nd init, and I have tried to overclock to 1.2 GHz but every app shows 1.0 GHz.
It is possible to overclock with stock ROM DFP-231?

I HAVE INSTALLED THE ZIP FILE FROM THIS SITE IN CWM-RECOVERY
http://dl.dropbox.com/u/43690836/Android Public/Multiboot/bm_cwm_mb_v0.8-signed.zip
AND AFTER THIS SETVSEL WAS WORKING.
IS INSTALLING ALL THIS STUFF:
- Touch BootMenu v2.0.0
- TWRP 2.1.1 for Motorola Defy (Stable recovery)
– CWM v5.0.6 – jordan (Custom)
- Multiboot script v0.5.5
- Multiboot binary v0.1
- Defy Overclock (default settings: 1GHz, 600MHz and 300MHz).


Or see this post: http://forum.xda-developers.com/showpost.php?p=25479166&postcount=16203
with out install

Sent from my MB526 using XDA

 

[Vicsa]

I have rooted my Defy+ with BL7, installed 2nd init, and I have tried to overclock to 1.2 GHz but every app shows 1.0 GHz.
It is possible to overclock with stock ROM DFP-231?


Sent from my MB526 using XDA

It shouldn't be a problem. Be sure that overclock status in a bootmenu is enabled and that you save your changes before you leave this menu and reboot.

 

[cyrusct82]

I have installed even the latest cm9 as multiboot from quarx2k but the rom shows Max freq. 1000mhz (in 2nd init I have 1200mhz).

Sent from my MB526 using XDA

 

[Vicsa]

I have installed even the latest cm9 as multiboot from quarx2k but the rom shows Max freq. 1000mhz (in 2nd init I have 1200mhz).

Sent from my MB526 using XDA

If you want to do it, you need more power. Increase Vsel (guessing it's vsel4) @ 1200mhz to 68 but never go above 70.

 

[cyrusct82]

How can i add the vsel4 because i have in 2nd init only 3 vsel

 

[Vicsa]

How can i add the vsel4 because i have in 2nd init only 3 vsel

Doesn't really matter if you have 3 or 4 vsel's. If you've changed Clk3 to 1200mhz then you should increase voltage of vsel3 to 68. For more info on this see this blog

 

[cyrusct82]

I have installed Setvsel but when I open it the phone keeps restarting. It seems to me that overclock does not work with defy+ stock ROM. Am I wrong?

Sent from my MB526 using XDA

 

[arpith.fbi]

first install motorola overclock and load module and then use setcpu to change the frequency...this solution worked for many..
if ur phone keeps restarting that means that the voltage is very low..change the voltage first in bootmenu and then try to open setcpu..

hope it works

 

[Vicsa]

I have installed Setvsel but when I open it the phone keeps restarting. It seems to me that overclock does not work with defy+ stock ROM. Am I wrong?

Sent from my MB526 using XDA

Guess you're right man. Just tried to overclock my defy+ with BL7 (this rom) in CWM bootmenu and it doesn't work!

 

[cyrusct82]

Guess you're right man. Just tried to overclock my defy+ with BL7 (this rom) in CWM bootmenu and it doesn't work!

Watch first post i have writed there how i solved the problem

Sent from my MB526 using XDA

 

[Vicsa]

Watch first post i have writed there how i solved the problem

Sent from my MB526 using XDA

You've just earned your first thanks

 

[cyrusct82]

This is the site where i have found the zip file is from Romania http://www.nepotu.ro/2012/05/12/touch-bootmenu-pentru-motorola-defy-si-defy-plus/
thank you NEPOTU

Sent from my MB526 using XDA

 

[cyrusct82]

See this post: http://forum.xda-developers.com/showpost.php?p=25479166&postcount=16203

 

[milfaddict]

zip installs ok , but it will not boot no matter what
any ideas ?

 

[rsk_kelkar]

Same here

zip installs ok , but it will not boot no matter what
any ideas ?

I second that

 

[rsk_kelkar]

I have rooted my Defy+ with BL7, installed 2nd init, and I have tried to overclock to 1.2 GHz but every app shows 1.0 GHz.
It is possible to overclock with stock ROM DFP-231?

I HAVE INSTALLED THE ZIP FILE FROM THIS SITE IN CWM-RECOVERY
http://dl.dropbox.com/u/43690836/Android Public/Multiboot/bm_cwm_mb_v0.8-signed.zip
AND AFTER THIS SETVSEL WAS WORKING.
IS INSTALLING ALL THIS STUFF:
- Touch BootMenu v2.0.0
- TWRP 2.1.1 for Motorola Defy (Stable recovery)
– CWM v5.0.6 – jordan (Custom)
- Multiboot script v0.5.5
- Multiboot binary v0.1
- Defy Overclock (default settings: 1GHz, 600MHz and 300MHz).


Or see this post: http://forum.xda-developers.com/showpost.php?p=25479166&postcount=16203
with out install

Sent from my MB526 using XDA

flashing this my stuck at motorola logo

 

[cyrusct82]

What is your Rom?
As the title says "overclock with stock Rom". Has worked for me in stock DFP-231 with Bl7.

Sent from my MB526 using xda app-developers app