[Q] ow to flash mikes new firmware?

[eggyenergy]

I have hboot 1.17 from alpharev, and c
Htc cid e11, now this is my question, do i need to supercid or will mine work when i flash the new pg58 from mike in bootloader? Its in the list but scared to brick, and what to do next, how i get recovery back? And will i boot into my rom im now using? Please respond clearly?

Sent from my HTC Sensation using xda premium

 

[brett_c]

I had to do supercid, which I had not previously done to install the 3.6.x versions of ARHD.

I originally installed the firmware, and booting into my phone saw that the radio had not been installed. I then attempted to install the updated radio directly, but got an error with writing the radio, so I then performed supercid instructions and reflashed the firmware and confirmed that the radio was also updated.

 

[malybru]

I have hboot 1.17 from alpharev, and c
Htc cid e11, now this is my question, do i need to supercid or will mine work when i flash the new pg58 from mike in bootloader? Its in the list but scared to brick, and what to do next, how i get recovery back? And will i boot into my rom im now using? Please respond clearly?

Sent from my HTC Sensation using xda premium

Hi,

If your CID is in the list,then you can flash the new firmware.
Make sure you flash Firmware 3.12.401.2/102 ,if you intend to flash 6.x.x ROM.
HERE is a good guide to follow.

Make sure you do a MD5 checksum of the PG58IMG.zip that you intend to use.

 

[eggyenergy]

Hi,

If your CID is in the list,then you can flash the new firmware.
Make sure you flash Firmware 3.12.401.2/102 ,if you intend to flash 6.x.x ROM.
HERE is a good guide to follow.

Make sure you do a MD5 checksum of the PG58IMG.zip that you intend to use.

Thanks bro it all worked out

Sent from my HTC Sensation using xda premium