[Q] P905V recovery brick

[biggiesmalls657]

Hey Guys,

When I try to boot in Odin mode the tablet just boots with RECOVERY BOOTING....then hangs...

Samsung
Galaxy Note Pro

Unlocked Pic
Custom
Android

I was rooted then i wanted to flash stock and it went downhill from there. It flashed last night but wifi wasnt working. I really dont want to take it to verizon. I have revived but the three button salute doesnt let me get into download mode. Please help Its insuranced but will they cover it since it has Custom on it?

Edit: Screen is not faint and the device is working.

 

[Gatsrom]

So reading some other threads where people encountered this problem. Two main solutions

1. bad recovery flash, it needs to be flashed again.
2. Can you still plug in the tablet and charge it? If you can do that the other recommended solution was burning the battery out until dead, basically forcing a full on restart of everything, then plugging in the device letting it recharge then trying to boot into download mode again. They say pull the battery, but since you can't do that you need to burn it down to 0. As long as you can charge your tablet you aren't lost. If you can get into download mode after trying that flash stock firmware from odin. Then start the process from step 1, clean start.

Either way, I wouldn't panic yet. Well don't panic at all. Panicking just makes mistakes and you aren't anywhere near the hopeless stage where you have to bring it back to verizon yet. I'm sure other people here will have other ideas as well and some people may have had the same problem. Just breathe. Burning the battery will give you some relaxing time lol. Pretty confident it can be fixed.

Hey Guys,

When I try to boot in Odin mode the tablet just boots with RECOVERY BOOTING....then hangs...

Samsung
Galaxy Note Pro

Unlocked Pic
Custom
Android

I was rooted then i wanted to flash stock and it went downhill from there. It flashed last night but wifi wasnt working. I really dont want to take it to verizon. I have revived but the three button salute doesnt let me get into download mode. Please help Its insuranced but will they cover it since it has Custom on it?

 

[biggiesmalls657]

So reading some other threads where people encountered this problem. Two main solutions

1. bad recovery flash, it needs to be flashed again.
2. Can you still plug in the tablet and charge it? If you can do that the other recommended solution was burning the battery out until dead, basically forcing a full on restart of everything, then plugging in the device letting it recharge then trying to boot into download mode again. They say pull the battery, but since you can't do that you need to burn it down to 0. As long as you can charge your tablet you aren't lost. If you can get into download mode after trying that flash stock firmware from odin. Then start the process from step 1, clean start.

Either way, I wouldn't panic yet. Well don't panic at all. Panicking just makes mistakes and you aren't anywhere near the hopeless stage where you have to bring it back to verizon yet. I'm sure other people here will have other ideas as well and some people may have had the same problem. Just breathe. Burning the battery will give you some relaxing time lol. Pretty confident it can be fixed.

Thats why ^^^^^^^ i love this great community because people help each other and positive feedback rather than negativity. I have modified dozens of device over the years and this device is my first big fail as of now but I will let it die. What gets me is Verizon and ATT know that locking their device makes people mad and yet they continue to do whats best for business. I someday would love to reach dev status. How would I flash the recovery without download mode?

 

[biggiesmalls657]

Debrick IMG

I also have the Stock Rom decompiled and am trying to make a Debrick IMG to get the tablet to boot from SDext to get to download mode then im out of the woods but i need to find out what imgs to use. I have Win32 Disk Imager ready and this is how I saved my S3 verizon last year. I don't have download mode yet or ADB (i think) so im running out of ideas. There are a lot of awesomesauce devs out there (including you) that do amazing things for our devices. Mattlgroff saved my RAZR Maxx and Trident made the ally a great phone for its time. It might not seem sometimes especially how people act by bickering but we really do appreciate the hard work of development across the board of devices. End Story

 

[Mad07]

just boots with RECOVERY BOOTING....then hangs...
--- wanted to flash stock and it went downhill from there. It flashed last night but wifi wasnt working.

the first one sounds so, that the recovery Image was/is the wrong one. This matched also the 2nd one : Stock, but Wifi is not working. If you flash e.g. on P905 the H3 Imagage and after that the C3 kernel, Wifi doesn't work in this status also anymore. I'll believe, you've flashed a wrong image.

To change anything / or the repair the Tab, you must have the possibility to have an access to the Tablet.
What does you've try?


Fastboot / Recovery-Menu? [This one failed -if I've understood you right]
Download-Menu?
Up to which point does your Tab start's up ? Doers you've any access?

 

[Gatsrom]

I also have the Stock Rom decompiled and am trying to make a Debrick IMG to get the tablet to boot from SDext to get to download mode then im out of the woods but i need to find out what imgs to use. I have Win32 Disk Imager ready and this is how I saved my S3 verizon last year. I don't have download mode yet or ADB (i think) so im running out of ideas. There are a lot of awesomesauce devs out there (including you) that do amazing things for our devices. Mattlgroff saved my RAZR Maxx and Trident made the ally a great phone for its time. It might not seem sometimes especially how people act by bickering but we really do appreciate the hard work of development across the board of devices. End Story

Hmmm we definitely need someone with a 905 to post the partition info if you're going to try to build a debrick.img. Have you used search to see if anyone maybe already has? I only have the 900 and I was pretty sure they were different. Just glancing at this program I'm guessing you'd need boot.img since it's going to basically provide a bootloader as the phone hops from internal to external looking for a way to boot. I've never used it though so I don't want to tell you the wrong thing :x

 

[biggiesmalls657]

Hmmm we definitely need someone with a 905 to post the partition info if you're going to try to build a debrick.img. Have you used search to see if anyone maybe already has? I only have the 900 and I was pretty sure they were different. Just glancing at this program I'm guessing you'd need boot.img since it's going to basically provide a bootloader as the phone hops from internal to external looking for a way to boot. I've never used it though so I don't want to tell you the wrong thing :x

Now the software wont flash and there seems to be a hardware issue (my screen flickers) and it didnt last night.

Update: This device is fixed except for wifi wont initialize but this can help other users. Please lock this thread and hope it helps other people in unbricking! I love XDA and its community!

 

[Mad07]

Update: This device is fixed except for wifi wont initialize but this can help other users

What does you'Ve done? Maybe other users have teh same issue and there are happy, if they can found a way to reanimate the Tab?

 

[biggiesmalls657]

What does you'Ve done? Maybe other users have teh same issue and there are happy, if they can found a way to reanimate the Tab?

The Tablet has to be completely dead and then you can charge it to odin cause of the recovery booting ...... but draining the battery clears RAM and then i can get into download mode. Its still better than a 750 dollar paperweight just need to fix wifi. Its almost set up this way and takes longer to fix the device if you are kind of in a hurry. I was rooted but unfortunately have no safestrap so i could not back up my image It was in a bricked state and was corrected by troubleshooting android related problems and flashing in Odin. The only question besides the wifi problem is even though i flashed Stock firmware, my device shows up as Custom????? Any Ideas its not tripped i know that much.

 

[Gatsrom]

The Tablet has to be completely dead and then you can charge it to odin cause of the recovery booting ...... but draining the battery clears RAM and then i can get into download mode. Its still better than a 750 dollar paperweight just need to fix wifi. Its almost set up this way and takes longer to fix the device if you are kind of in a hurry. I was rooted but unfortunately have no safestrap so i could not back up my image It was in a bricked state and was corrected by troubleshooting android related problems and flashing in Odin. The only question besides the wifi problem is even though i flashed Stock firmware, my device shows up as Custom????? Any Ideas its not tripped i know that much.

So the battery trick did reset it? Score! lol. I've actually had two friends have to do something similar with other android devices. So you flashed stock onto it (thank god) and now the only problem remaining is no wifi? I know we had a thread about no wifi for our specific device in the forums. Search for that. It seemed like people were able to fix it in that thread.

 

[biggiesmalls657]

So the battery trick did reset it? Score! lol. I've actually had two friends have to do something similar with other android devices. So you flashed stock onto it (thank god) and now the only problem remaining is no wifi? I know we had a thread about no wifi for our specific device in the forums. Search for that. It seemed like people were able to fix it in that thread.

Wifi and bluetooth and system status is custom and updating bricks and puts me back to letting it die.

 

[Mad07]

Wifi and bluetooth and system status is custom and updating bricks

Where you can see, that Wifi and BT is custom ?

System status is also Custom on my tab ( TWRP was flashed )
At which point the update bricks? Near at the end > hiddenfile ext4 wrong ?
Which this error ( I've select the GBT - file, but the Tab was buyed in Austria > so I need the ATO ) I've triggered KNOX After download the correct FW-File, odin could flash successfully.
If you change temporary the Kernel for root, Wifi is no working , too...

updating bricks

If odin failed during flashing, press one time Reset in odin, dis-/ connect the USB cable from the TAB and you can continue with odin. During next flash, you received a lot of red text lines, that the progressbar indicator is not correct, but this one you can ignore. Urgent is, that odin said : PASSED at the end.
In you case, I would make direct after successfull flash -> boot into the EM Menu and initiate a factory reset

 

[biggiesmalls657]

Where you can see, that Wifi and BT is custom ?

System status is also Custom on my tab ( TWRP was flashed )
At which point the update bricks? Near at the end > hiddenfile ext4 wrong ?
Which this error ( I've select the GBT - file, but the Tab was buyed in Austria > so I need the ATO ) I've triggered KNOX After download the correct FW-File, odin could flash successfully.
If you change temporary the Kernel for root, Wifi is no working , too...


If odin failed during flashing, press one time Reset in odin, dis-/ connect the USB cable from the TAB and you can continue with odin. During next flash, you received a lot of red text lines, that the progressbar indicator is not correct, but this one you can ignore. Urgent is, that odin said : PASSED at the end.
In you case, I would make direct after successfull flash -> boot into the EM Menu and initiate a factory reset

I had NB1 installed and it was working then i used Repair Assistant and it has recovery booting and the boot logo with Custom android. They wont cover it for insurance, i might as well just damage and pay the deductible. I have tried everything and it results in a brick.

 

[Mad07]

From where is this image ND repair assistant ? The bootlogo is changed via root very easy. For that nobody needs a total ROM flash. It's only 1 zipfile.... Hopefully the repair assistant does not has make a recreate partitions....

let go out from the best case Which stock rom does you try to flash? The latest one?

Model: SM-P905V
Model name: GALAXY NotePRO 12.2 LTE
Country: USA (Verizon)
Version: Android 4.4.2
Changelist: 1810991
Build date: Mon, 10 Nov 2014 07:03:29 +0000
Product Code: VZW
PDA: P905VVRUANK1
CSC: P905VVZWANK1
MODEM: P905VVRUANK1

I didn't still know at which area Odin failed to flash

 

[biggiesmalls657]

From where is this image ND repair assistant ? The bootlogo is changed via root very easy. For that nobody needs a total ROM flash. It's only 1 zipfile.... Hopefully the repair assistant does not has make a recreate partitions....

let go out from the best case Which stock rom does you try to flash? The latest one?

Model: SM-P905V
Model name: GALAXY NotePRO 12.2 LTE
Country: USA (Verizon)
Version: Android 4.4.2
Changelist: 1810991
Build date: Mon, 10 Nov 2014 07:03:29 +0000
Product Code: VZW
PDA: P905VVRUANK1
CSC: P905VVZWANK1
MODEM: P905VVRUANK1

I didn't still know at which area Odin failed to flash

Yes the latest build is what I flashed. I wonder if the kernel changed but right now NB1 makes it usable with no WiFi or bluetooth.

 

[Mad07]

Which Rom does you mean exactly with NB1 ?
the only one, which I've found - which contains NB1 at the end is:

Model: SM-P905V
Model name: GALAXY NotePRO 12.2 LTE
Country: USA (Verizon)
Version: Android 4.4.2
Changelist: 617169
Build date: Thu, 06 Feb 2014 12:19:18 +0000
Product Code: VZW
PDA: P905VVRUANB1
CSC: P905VVZWANB1
MODEM: P905VVRUANB1

Why you don't try to flash the K1 Rom? [See above].
If I think about my Galaxy S3 LTE : I have the old Bootloader ( without Knox ) on the device -> if I flash the new System / Kernel without the new Bootloader, I'll have also a problem with a nonworking Wifi ...

 

[biggiesmalls657]

So the battery trick did reset it? Score! lol. I've actually had two friends have to do something similar with other android devices. So you flashed stock onto it (thank god) and now the only problem remaining is no wifi? I know we had a thread about no wifi for our specific device in the forums. Search for that. It seemed like people were able to fix it in that thread.

The software is flashed and notice the system sleeps and screen wont turn back on until i three finger salute. Boot Logo has no unlocked symbol but About phone displays Custom. Also Wifi/Bluetooth issue which I could not find. If i can fix the wifi and bluetooth i wont send into verizon. They should cover it, Odin mode displays 0x0.

Edit: Odin mode still displays SYSTEM STATUS: Custom even though I flashed the NB1 build. Wifi/Bluetooth still do not work. I have wiped data/ cache and rebooted the device. Towelroot didnt work previously but I will try with this build.

 

[Mad07]

ok, first of all, go into the settings, developer and enable USB system debugging. Shut down the Tab, Hold The home key, volume down and Power. After that, the tab starts into the download mode, press volume + to continue. The screen changed. Connect the Tab with you running Odin ( check the task manager, that nothing from Kids is still running in the background. Select as PDA the K1 Firmware which was in the zip. Ending is tar.md5.
Check is Only Autogreboot and the F fuse(?) >>default settings are selected. Press Start and wait... In Odin you can following which Parton is now flashed. Hopefully Odin stopped with Passed and the Tab rebooted. If you've the wrong region rom, Odin failed at the hidden file ext4.

 

[biggiesmalls657]

ok, first of all, go into the settings, developer and enable USB system debugging. Shut down the Tab, Hold The home key, volume down and Power. After that, the tab starts into the download mode, press volume + to continue. The screen changed. Connect the Tab with you running Odin ( check the task manager, that nothing from Kids is still running in the background. Select as PDA the K1 Firmware which was in the zip. Ending is tar.md5.
Check is Only Autogreboot and the F fuse(?) >>default settings are selected. Press Start and wait... In Odin you can following which Parton is now flashed. Hopefully Odin stopped with Passed and the Tab rebooted. If you've the wrong region rom, Odin failed at the hidden file ext4.

I have flashed it that way several times. The software flashing isn't the problem, its WiFi and Bluetooth jam and wiping data cache do not fix it. I have re downloaded the software and its a no go.

 

[Mad07]

I have flashed it that way several times. The software flashing isn't the problem, its WiFi and Bluetooth jam and wiping data cache do not fix it. I have re downloaded the software and its a no go.

If Knox still triggered? Ill believe so. K1 is now the current FW?
Try after install TWRP , wipe normal and go into the adv. wipe settings to format / System and / Data / Cache etc..
Reflash K1 again.

How does it looks like Jam of Wifi / BT ? does you received a FC? only Interruption ?