[Q] please help hard bricked d5322

[modesazhi]

iv root my phone with locked boot loader & install timwin recovery for locked boot loader , its very good working then i decide try this CARBON-KK-UNOFFICIAL-20150221-2137-tianchi , copy 2 sd card & flash it whit tim win recovery all down but when i reboot it no responds
try to unlock bootloader with last version flash tools Version 0.9.18.5 but not entering flash mode by hold down vol botton just blink one time red & imiditly green light & agine red then turn led off
warning flash tool : Device connected with USB debugging off
04/037/2015 18:37:43 - INFO - For 2011 devices line, be sure you are not in MTP mode
fastboot mode is work when hold down vol up & plug usb cable solid blue led turn on . device attached & respons when unlock bootloader with given number
FAILED (remote: Command did not succeed)
finished. total time: 0.093s
second time try
FAILED (remote: Device is already rooted)
finished. total time: 0.004s
try s1 tool with testpoint
resul:

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PROCESSING ...
SERIAL NUMBER : D7E50A04
HARDWARE ID 04000100E1509100 NOT SUPPORTED
HARDWARE ID : 04000100E1509100
NOT SUPPORTED HASH :B77943D5B24F7012CB12EB2FF857C69EAA6518C0E58957AA70C0B0590E1F3BCA
Elapsed:21 secs.
pleas help un bricked my d5322
tanx

 

[munjeni]

Do you have working a fastboot mode?

 

[rrajesh]

iv root my phone with locked boot loader & install timwin recovery for locked boot loader , its very good working then i decide try this CARBON-KK-UNOFFICIAL-20150221-2137-tianchi , copy 2 sd card & flash it whit tim win recovery all down but when i reboot it no responds
try to unlock bootloader with last version flash tools Version 0.9.18.5 but not entering flash mode by hold down vol botton just blink one time red & imiditly green light & agine red then turn led off
warning flash tool : Device connected with USB debugging off
04/037/2015 18:37:43 - INFO - For 2011 devices line, be sure you are not in MTP mode
fastboot mode is work when hold down vol up & plug usb cable solid blue led turn on . device attached & respons when unlock bootloader with given number
FAILED (remote: Command did not succeed)
finished. total time: 0.093s
second time try
FAILED (remote: Device is already rooted)
finished. total time: 0.004s
try s1 tool with testpoint
resul:

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PROCESSING ...
SERIAL NUMBER : D7E50A04
HARDWARE ID 04000100E1509100 NOT SUPPORTED
HARDWARE ID : 04000100E1509100
NOT SUPPORTED HASH :B77943D5B24F7012CB12EB2FF857C69EAA6518C0E58957AA70C0B0590E1F3BCA
Elapsed:21 secs.
pleas help un bricked my d5322
tanx

Dude! If light is blink.. It's not a hard brick, just a soft brick don't worry everything thing is okay. You flashed a wrong kernel/locked bootloader.
Follow these setups
1.Download latest flash tool.
2.Install and go eg C:/flashtool/drivers (install t2 drivers) /windows 8 has some problems_google it
3. Open SIM panel, you will find a purple button press once with pan tip/needle
4. Put your phone in charging keep 1_2 hours
5. Connect in fastboot, now try to unlock phone with Sony Official bootloader unlocking method.(Google it)

Best of luck

 

[modesazhi]

No charging just blink slowly red led continusly

 

[prabhata moharana]

hard brick of xperia t2 ultra d5322 device

I have rooted my sony xperia t2 ultra and installed twrp recovery on it and it worked fine..but when i try to flash a custom rom,it shows a successful message and got bricked afterwards..was on low battery that time..showing red blink on led but now thre is no vibration as well as there is no led blink..please help me to fix it..please..asap..

 

[Dulagwagon]

I have rooted my sony xperia t2 ultra and installed twrp recovery on it and it worked fine..but when i try to flash a custom rom,it shows a successful message and got bricked afterwards..was on low battery that time..showing red blink on led but now thre is no vibration as well as there is no led blink..please help me to fix it..please..asap..

It happened to me few hours ago. I flashed a wrong kernel, then got no response/screen/led. take your time and hold power and vol + buttons 'til you feel the phone vibrate 4 times (1+3). As it happens you're sure it's turned off. So, let it charge for one or two hours, then flash a previously working kernel through flashtools fastboot mode.
This worked for me and hope it helps you too.
Best regards.