[Q] problems after touch screen replacement

[ncastel]

Hi all,
I have a probleme and i dont know how to resolve it!
i've replaced the digitizer of my htc aria, after that, everything seemed to working fines, but when i want to make a call, the screen shut down, and the screen and button are not responding anymore!! the only way to turn it on again is to receive a call.... it's very strange i know... and if the person that i call respond i hear it and i can hear if someone call me...

any ideas??

 

[duckredbeard]

There is a photo sensor in the top right corner. When you installed the new screen that photo sensor got covered up. The phone thinks you're holding it to your face so it blanks out. Try pressing on the top right corner momentarily.

There are only 10 kinds of people. Those who understand binary math, and those who don't.

 

[Theonew]

There is a photo sensor in the top right corner. When you installed the new screen that photo sensor got covered up.

Proximity sensor .

 

[ewoo101]

sensors/digitizers/ speaker

whats the solution? I uncovered the sensor but the screen still goes black during a call and doesn't change unless the call is somehow ended. Also, now that i have changed my digitizer the speaker doesn't work unless I squeeze the top of the phone. any solutions?

 

[duckredbeard]

My solution? HTC Vivid.

You can't know your limits until you exceed them.

 

[mosrespect]

Hi all,
I have a probleme and i dont know how to resolve it!
i've replaced the digitizer of my htc aria, after that, everything seemed to working fines, but when i want to make a call, the screen shut down, and the screen and button are not responding anymore!! the only way to turn it on again is to receive a call.... it's very strange i know... and if the person that i call respond i hear it and i can hear if someone call me...

any ideas??

Same story here - cheap digitizer off ebay

 

[CaptainMaki]

this is nothing to do with the digitizer itself. You've probably hadn't returned the rubber gasket on the proximity sensor during replacement. search for threads on this in this forum.