A friend has the null IMEI issue and I want to try the procedure outlined for the Samsung Captivate in the following thread:
http://forum.xda-developers.com/showthread.php?t=881162
Samsung Captivate Android Development - > RESTORE IMEI and Product Code w/o ADB, PC (ALL DONE ON PHONE) nv_data.bin
I don't think the product code used for the captivate will work with the nexus S. Can someone tell me the product code to use when editing the following lines in nv_data.bin? (copied from the above thread!)
00188008|2e|34|00|00|00|00|ff|41|.4....A
00188010|54|54|00|00|00|00|53|47|TT....SG
00188018|48|2d|49|38|39|37|5a|4b|H-I897ZK
00188020|41|41|54|54|00|00|00|00|AATT....
Sorry if this has already been conclusively shown as not possible for nexus S. Some people on the captivate thread have managed to restore it using this method and I thought it would be worth a shot.
The nexus S in question is the SLCD version i9023.
Given below are the steps that caused the issue.
==============================================
Some days ago, official ICS for Nexus S was released, but my cell couldn;t auto update because it was running a custom ROM. I tried to follow this procedure to switch to 2.3.3 or .4. (http://www.pcworld.com/article/242759/how_to_revert_your_android_smartphone_to_a_stock_rom.html )
Installing the above ROM, my cell went berserk. The ROM booted fine but 3 of my touch buttons wouldn't light up and keyboard input alignment was all wrong and I had to remove battery and restart it every time I wanted to go back into some other setting.
After 9-10 restarts, I managed to reach the update setting, downloaded Gingerbread 2.3.6 OTA and installed it. It worked perfectly, and I was all set to download ICS and install it. Then I followed this link and installed ICS reaching where I am at the moment. (http://www.addictivetips.com/mobile/manually-install-android-4-0-3-ics-update-on-nexus-s-download/)
This ICS works perfectly fine, except that the phone is not receiving any network signals whatsoever.
I had made Oxygen's backup using CWM's backup feature on the cellphone and I thought I'd restore it, so I did a vol up + power, and selected recover. The cell restarted, showed a dead android, and booted into ICS. Several attempts have resulted in the same.
==============================================
http://forum.xda-developers.com/showthread.php?t=881162
Samsung Captivate Android Development - > RESTORE IMEI and Product Code w/o ADB, PC (ALL DONE ON PHONE) nv_data.bin
I don't think the product code used for the captivate will work with the nexus S. Can someone tell me the product code to use when editing the following lines in nv_data.bin? (copied from the above thread!)
00188008|2e|34|00|00|00|00|ff|41|.4....A
00188010|54|54|00|00|00|00|53|47|TT....SG
00188018|48|2d|49|38|39|37|5a|4b|H-I897ZK
00188020|41|41|54|54|00|00|00|00|AATT....
Sorry if this has already been conclusively shown as not possible for nexus S. Some people on the captivate thread have managed to restore it using this method and I thought it would be worth a shot.
The nexus S in question is the SLCD version i9023.
Given below are the steps that caused the issue.
==============================================
Some days ago, official ICS for Nexus S was released, but my cell couldn;t auto update because it was running a custom ROM. I tried to follow this procedure to switch to 2.3.3 or .4. (http://www.pcworld.com/article/242759/how_to_revert_your_android_smartphone_to_a_stock_rom.html )
Installing the above ROM, my cell went berserk. The ROM booted fine but 3 of my touch buttons wouldn't light up and keyboard input alignment was all wrong and I had to remove battery and restart it every time I wanted to go back into some other setting.
After 9-10 restarts, I managed to reach the update setting, downloaded Gingerbread 2.3.6 OTA and installed it. It worked perfectly, and I was all set to download ICS and install it. Then I followed this link and installed ICS reaching where I am at the moment. (http://www.addictivetips.com/mobile/manually-install-android-4-0-3-ics-update-on-nexus-s-download/)
This ICS works perfectly fine, except that the phone is not receiving any network signals whatsoever.
I had made Oxygen's backup using CWM's backup feature on the cellphone and I thought I'd restore it, so I did a vol up + power, and selected recover. The cell restarted, showed a dead android, and booted into ICS. Several attempts have resulted in the same.
==============================================
Last edited:
