[Q] [q] [bricked][htc desire hd] [help needed to revert to stock]

Shawiee

Member
Mar 27, 2015
27
0
0
Hello everyone this is Shawiee. Lately I've been working on my HTC DHD and I've tried to root it with Kingo Root after I unlocked my bootloader. After doing that automatically a new recovery (CWM 5.0.4...) was installed so I thought I had permanent root and I was ready to install a custom rom. So I downloaded one called Jellytime 4.1.2 and after I wiped the factory data, cache and dalvik cache I installed the ROM. My phone is T-Mobile branded so whenever I try to turn it on it just vibrates once then freezes on the T-Mobile logo. I've tried many RUU's and many PD98IMG's to revert it to stock but none of them helped so I'm looking for a way to make it boot again, no matter what version of android or HTC Sense gets installed. I can lock/relock the bootloader because I have access to bootloader whenver I press volume down+power button so basically I just need a way to make it work again, so please if anyone can help me show me a way, completely if possible to make my HTC work again. It's S-ON, ACE V SHIP but you can look the photo down here to check the detalis:

Check the bootloader at the bottom of the page at the attachments, relocked for the moment but I can unlock it if it's needed. I never created a goldcard so if it's needed, please show me how to!
I also have a photo of how the screen shows up when I try to power on, that T-Mobile logo so there are three photos.
Finally, I repeat I just want a way back to make my HTC Desire HD work again, no matter if rooted or unrooted, no matter the version of android I just want a working RUU, PD98IMG or whatever. Peace, Shawiee. :laugh:
 

marknoll

Senior Member
May 13, 2014
2,932
300
0
Your prob is that your device is branded. T-Mobile. Find the thread pertaining to your device. U might have to flash a t mobile branded ruu

---------- Post added at 08:15 PM ---------- Previous post was at 08:13 PM ----------

Since you can access boot loader. Do that and in a cmd prompt run fastboot getvar all. That will help us see your specs
 

Shawiee

Member
Mar 27, 2015
27
0
0
Your prob is that your device is branded. T-Mobile. Find the thread pertaining to your device. U might have to flash a t mobile branded ruu

---------- Post added at 08:15 PM ---------- Previous post was at 08:13 PM ----------

Since you can access boot loader. Do that and in a cmd prompt run fastboot getvar all. That will help us see your specs
Of course, check the detalis down there.
There is a problem about the RUU, I can't find a T-Mobile RUU, that's why I started this thread.

Here are the results after fastboot getvar all:

----------------------------------------------------------------
C:\Win32>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0029
(bootloader) version-baseband: 26.14.04.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.111.3
(bootloader) serialno: HT0C6RX01162
(bootloader) imei: 352668048832354
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 3821mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fcef1579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
--------------------------------------------------------------------------------
 

Shawiee

Member
Mar 27, 2015
27
0
0
---------- Post added at 08:53 PM ---------- Previous post was at 08:51 PM ----------

[/COLOR. Um... Yea you are. Kosovo is a u.k entity[/QUOTE]

I'd really appreciate you a lot for this but can you be more specific with which RUU should I choose in that page and is there anything to do except following the instructions for the RUU? And are you sure this is for HTC DESIRE HD?
 

Shawiee

Member
Mar 27, 2015
27
0
0
Look at your cidnum..also look at your baseband version. Put those two things in Google search engine. Ie: tmob101 cidnum HTC desire

---------- Post added at 09:02 PM ---------- Previous post was at 09:01 PM ----------

What should I excatly do after I download all the parts? I never used to work with a Nandroid backup.
 

Shawiee

Member
Mar 27, 2015
27
0
0
No no. Not that. I was just showing u an example

---------- Post added at 09:08 PM ---------- Previous post was at 09:05 PM ----------

Your best bet is to post in ace think tank thread here on xda

---------- Post added at 09:16 PM ---------- Previous post was at 09:08 PM ----------

Alright, I started downloading a RUU.exe that's for Desire HD, it's the correct CID and the correct T-MOB. One last question. To run the RUU in the right way with .exe do I need to have S-OFF or Goldcard?
 

marknoll

Senior Member
May 13, 2014
2,932
300
0
No no. Not that. I was just showing u an example

---------- Post added at 09:08 PM ---------- Previous post was at 09:05 PM ----------

Your best bet is to post in ace think tank thread here on xda

---------- Post added at 09:16 PM ---------- Previous post was at 09:08 PM ----------

Alright, I started downloading a RUU.exe that's for Desire HD, it's the correct CID and the correct T-MOB. One last question. To run the RUU in the right way with .exe do I need to have S-OFF or Goldcard?

Ruus require a locked bootloader

Sent from my ATRIX HD using Tapatalk