[Q] Reviving a Motorola Atrix HardBrick

[Fredcho]

Hello I need a solution for this Motorola Atrix.
Error Has Failed to Boot and then off to the second, I can not get over anything with any key combination.

I do not know why try method, even from here in XDA but the PC does not recognize me as I can not enter either the Fastboot.
Appears Failed to Boot and then off very quickly.

With all my soul appreciate if someone can help me, thank you very much to all.

I've charged the battery with a universal charger, and the low battery message disappeared but failed to boot still there

HELP! PLEASE! As I enter fastboot mode? somehow!?

 

[ravilov]

This is not a hardbrick, so please change the title of the topic so as to not confuse others, and next time use proper and accurate terminology.

You need to charge your battery (in a friend's phone or get an external charger), and then use this tool (option 3).
Download link for the tool: http://cleanimport.xda/index.php?threads/1583199/ (bottom of the first post)

 

[Fredcho]

Not recognized by USB port, neither recognizes the Script

This is not a hardbrick, so please change the title of the topic so as to not confuse others, and next time use proper and accurate terminology.

You need to charge your battery (in a friend's phone or get an external charger), and then use this tool (option 3).
Download link for the tool: http://cleanimport.xda/index.php?threads/1583199/ (bottom of the first post)

Apparently a HardBrick as I charged the battery to maximum with a universal charger and I can not enter fast boot mode to perform the script. Do not step on that screen and I used all keystrokes, has relieved me telling me not a HardBrick.

I am a relative novice, could you tell me how I apply fruitcake without the need for USB port recognizes the Atrix?
After charging the battery get the same message but without "the battery is too low to flash". Still does not recognize the USB port.

You tell me how do I make the Laptop I recognize your phone? Thank you very much for your concern and response.

 

[ravilov]

Do you have all the proper USB drivers installed? I don't use windows so I don't know about specifics. Search through the forum or through Motorola's site for proper driver download.

 

[Fredcho]

Ya lo he intentado todo

Do you have all the proper USB drivers installed? I don't use windows so I don't know about specifics. Search through the forum or through Motorola's site for proper driver download.

I have all the drivers I mentioned in the topic of XDA, entire recipe to make the script but I still did not recognize it. No longer do or key combination to use, nothing more "failed to boot" and "NV Flash" a second before shutting off.

VOL + even left without battery, then connect the battery hold, light it and neither USB nor recognizes the RSD Lite or Script.

I've tried everything with Windows, but I also use Ubuntu, if you know how to make it recognize the USB with any method or any OS I ask that you share.

I'm desperate and do not know what else to try ...

 

[AtrixNo4g]

Your going to have to flash back to your old firmware but you will lose root access- samething happen to me so i had a buddy charge my battery than i flashed back to 2.3.6 using RSD lite and i lost my root access but my atrix was back

Sent from my MB860 using xda app-developers app

 

[ravilov]

I've tried everything with Windows, but I also use Ubuntu, if you know how to make it recognize the USB with any method or any OS I ask that you share.

Linux should recognize the device immediately, there are no drivers required. If yours is not recognized even under Linux, then there's something seriously wrong and I'm clueless. Sorry.
To confirm is the phone recognized under Linux, try running lsusb.

 

[Fredcho]

Linux should recognize the device immediately, there are no drivers required. If yours is not recognized even under Linux, then there's something seriously wrong and I'm clueless. Sorry.
To confirm is the phone recognized under Linux, try running lsusb.

Neither Linux recognizes, is that no screen passes Failed to boot, then displays "Entering NV Flash Recovery" and then goes away.

If I leave it in the socket without battery appears EXACTLY the same but with "The battery is too low to flash" (as I show in the picture) and if I leave it attached to the power is not turned off, it stays on but does not pass that screen and I've tried all the combinations.

Please someone help me, is too much money for it to become brick: (

 

[upndwn4par]

Neither Linux recognizes, is that no screen passes Failed to boot, then displays "Entering NV Flash Recovery" and then goes away.

If I leave it in the socket without battery appears EXACTLY the same but with "The battery is too low to flash" (as I show in the picture) and if I leave it attached to the power is not turned off, it stays on but does not pass that screen and I've tried all the combinations.

Please someone help me, is too much money for it to become brick: (

Look in the "answers" thread at the top of the forum. If you are lucky, something there might help. Start with soft brick, then try hard brick.

 

[Fredcho]

Look in the "answers" thread at the top of the forum. If you are lucky, something there might help. Start with soft brick, then try hard brick.

I've seen that a user has been able to relive the HardBrick (Nottach)

I want to know exactly what steps performed to see if I can also try to revive.

I've tried all the key combinations that did made ​​him specifically?

 

[upndwn4par]

I've seen that a user has been able to relive the HardBrick (Nottach)

I want to know exactly what steps performed to see if I can also try to revive.

I've tried all the key combinations that did made ​​him specifically?

Sorry, I can't help with that. All I know is what I read in Nottach's post.

Did you try the automated tool that can help recover from a soft brick?

 

[faded_n_xrated]

i have the same problem with my atrix.. is there a video on how to fix it?

 

[Fredcho]

Sorry, I can't help with that. All I know is what I read in Nottach's post.

Did you try the automated tool that can help recover from a soft brick?

Yes, I tried but the computer does not recognize me when I connect the computer USB port and no way to enter fastboot mode.

 

[firecode95]

Well I think that it is hard brick you can try to make a "factory cable" and if only function wher you can go is nvflash then you can try to get new moherboard or try sent to official motorola service.

P.S
In china is some motherboard repair companys but it is expensive.

 

[Fredcho]

Well I think that it is hard brick you can try to make a "factory cable" and if only function wher you can go is nvflash then you can try to get new moherboard or try sent to official motorola service.

P.S
In china is some motherboard repair companys but it is expensive.

Well, it seems a little difficult considering that not much of this cable, some other solution, or is the only thing I have left?

Someone probao something different with success?

 

[joelorona]

Yes, I tried but the computer does not recognize me when I connect the computer USB port and no way to enter fastboot mode.

If you flash the original rom with RSDlite, it must recognize the phone in the rsd mode even thought that phone just stays in the "failed to boot" state. I had once this problem of not being able to boot and somewhere i read that the phone automatically is in rsd and it really worked.


Try just to power up your phone, open RSDlite and check if it appears in the list, if yes, just flash the correct rom and everything will be fine again.


Good luck

 

[Fredcho]

If you flash the original rom with RSDlite, it must recognize the phone in the rsd mode even thought that phone just stays in the "failed to boot" state. I had once this problem of not being able to boot and somewhere i read that the phone automatically is in rsd and it really worked.


Try just to power up your phone, open RSDlite and check if it appears in the list, if yes, just flash the correct rom and everything will be fine again.


Good luck

It does not work because RSD Lite does not recognize it. Anyone else?

 

[infeu]

someone said we can try to revive our phone by using nvflash. but it has problem that we need SBK! so we have to urge motorola release SBK!