[Q] Sensation XE Fully hard bricked , PLZ HELP !

[seaskyways]

Hi there , I was trying to use JuonuputBear to S-OFF my phone through the wire trick , so I was doing the wire trick (after several failing tries) , and somehow the phone was a total brick , doesn't take usb or charge led ... So I looked into this and I found a QHSUSB_DLOAD fix for that , however my phone doesn't even enter or appear as it is in that mode , I tried doing the wire trick while the phone is dead it didn't work , I tried my linux machine the QHSUSB_DLOAD the phone wasn't found ! I guess the bootloader was wiped when Jounuput bear was doing its stuff , plz help me guys !

EDIT : I don't think anymore the bootloader is wiped since I didn't reach the part where it installs JuonuptBear's bootloader ! PLease any ideas !

 

[stanleynhan]

you should have posted this in the Q&A section. You arent going to get much help here, just people ranting on the fact that you posted a question in the development issue. Mods should probably move this to that section. As for your problem, i can't really help. sorry

 

[seaskyways]

thx , I will tell a mod to move my thread :'(

 

[Sgt.Incontro]

Have you tried using the Sensation unbrick thread?

 

[rzr86]

try unbricking project or ask in juopunutbear's thread

 

[seaskyways]

It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?

 

[rzr86]

It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?

http://forum.xda-developers.com/showthread.php?t=1522351

 

[seaskyways]

http://forum.xda-developers.com/showthread.php?t=1522351

My phone is not being detected , I removed everything , I try to detect , nop ...

 

[rzr86]

My phone is not being detected , I removed everything , I try to detect , nop ...

while doing the juopunutbear method did you have enough battery?
if not remove battery,sdcard and sim and charge it as it is for 5-6 hours
then put them back and switch on the device normally

 

[seaskyways]

I had 99% charge !

 

[rzr86]

I had 99% charge !

did you check the troubleshoot from the guide you used?

edit:it is better to post your issue also in the thread you used

 

[seaskyways]

Troubleshooting in the jounuputbear thread is for live phones , not for dead phones ...

 

[seaskyways]

Any help guys ?!?!

 

[rzr86]

Any help guys ?!?!

the only thing i can tell you is use jtag.
i am out of ideas

 

[seaskyways]

Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help

EDIT : Maybe AdamOutler :?

 

[rzr86]

Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help

EDIT : Maybe AdamOutler :?

i never used jtag.i have no experience on it
you can go in a local repair shop.probably they can fix it

 

[seaskyways]

I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !

 

[rzr86]

I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !

troubleshoot
glad for you man

 

[whohitme]

I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !

Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.

Can you tell me what you did? Thank you!

 

[KernelDev101]

Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.

Can you tell me what you did? Thank you!

Please try and use my Guide here http://forum.xda-developers.com/showthread.php?t=2247319 i am very confident if used it will be fine and should let you proceed without any errors