[Q] sm n900 "not supported by kies 3" and fails at odin flashing, please help!
Hello to all, I explain what happened
I was on MK1 firmware, and battery was far worse than my old firmware MJ1, and somewhere i read that ML1 solved battery issues, but I had no ota for that update, nor kies found anything newer than mk1.
So, i decided to download ML1 (hong kong version) from sammobile and flash it via odin, but the process failed, showing this
<ID:0/027> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900ZSUCML1_N900OZSCML1_N900ZSUCMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/027> Odin v.3 engine (ID:27)..
<ID:0/027> File analysis..
<ID:0/027> SetupConnection..
<ID:0/027> Initialzation..
<ID:0/027> Get PIT for mapping..
<ID:0/027> Firmware update start..
<ID:0/027> SingleDownload.
<ID:0/027> modem.bin
<ID:0/027> NAND Write Start!!
<ID:0/027> sboot.bin
<ID:0/027> boot.img
<ID:0/027> cache.img
<ID:0/027> FAIL!
<ID:0/027>
<ID:0/027> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now when I turn it on the phone shows "firmware upgrade en****ered an issue. Please select recovery mode in kies & try again."
But when I start kies 3 and plug the phone it says that its not supported, so I cant restore it that way neither, and I ran out of ideas, please help me!
Hello to all, I explain what happened
I was on MK1 firmware, and battery was far worse than my old firmware MJ1, and somewhere i read that ML1 solved battery issues, but I had no ota for that update, nor kies found anything newer than mk1.
So, i decided to download ML1 (hong kong version) from sammobile and flash it via odin, but the process failed, showing this
<ID:0/027> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900ZSUCML1_N900OZSCML1_N900ZSUCMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/027> Odin v.3 engine (ID:27)..
<ID:0/027> File analysis..
<ID:0/027> SetupConnection..
<ID:0/027> Initialzation..
<ID:0/027> Get PIT for mapping..
<ID:0/027> Firmware update start..
<ID:0/027> SingleDownload.
<ID:0/027> modem.bin
<ID:0/027> NAND Write Start!!
<ID:0/027> sboot.bin
<ID:0/027> boot.img
<ID:0/027> cache.img
<ID:0/027> FAIL!
<ID:0/027>
<ID:0/027> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now when I turn it on the phone shows "firmware upgrade en****ered an issue. Please select recovery mode in kies & try again."
But when I start kies 3 and plug the phone it says that its not supported, so I cant restore it that way neither, and I ran out of ideas, please help me!
