[Q] USB Drivers

[zorro12010]

Hi,

I have a legend and everything was fine but after I tried to install the legend CM6RC2 BUILD 66 Rom from cynogenmod it would not reboot any more and I only saw the android robot. After that I tried to get into recovery but that's not possible anymore.

I al ready tried modaco's guide but I didn't understand.

Does anyone know how I can unbrick my usb to be able to get into recovery to install another Rom?

Thanks in advance!

 

[ilos]

you must unbrick your USB by following this step ( nobody can do it for you... ) :

http://android.modaco.com/content/h...com/309961/usb-brick-rickrolled-b0rked-fixed/

 

[zorro12010]

usb drivers

I tried to understand this guide but I don't understand this part:
"Move this to /data/ , and flash the modified image using:

"/data/flash_image misc /data/mtd0.img"

You can move both mtd0.img and flash_image by putting it on your sdcard, and issueing the following command in a terminal emulator:

'cat /sdcard/flash_image > /data/flash_image'
'cat /sdcard/mtd0.img > /data/mtd0.img'

You might have to do 'chmod u+x /data/flash_image' before you run the commands (or chmod 755 /data/flash_image)"

and also i cant do step one because device is not found

 

[ilos]

you must do this after starting your device.

Before starting your device you must mount you sdcard with 'fastboot oem enableqxdm 0' under fastboot mode ( device off : hold power button + volume down )

after your device started, go to market and install Connecbot.

Start connectbot, select ( at the bottom ) Local in place of ssh , and type 'su' 2 times.
If you get permission denied, do what he's done in his PS http://android.modaco.com/index.php?s=&showtopic=309961&view=findpost&p=1335813

 

[zorro12010]

i can type su as many times as i want and nothing happens.
YES i typed it in local.I re-installed htc sync and still my pc cant recognize my phone.
what should i do?

 

[ilos]

you type SU on your device ? ( in connectbot )

if you see a # at the begining of the line , you are logged as root , just follow the unbrink step

 

[smartsreenath]

you must do this after starting your device.

Before starting your device you must mount you sdcard with 'fastboot oem enableqxdm 0' under fastboot mode ( device off : hold power button + volume down )

after your device started, go to market and install Connecbot.

Start connectbot, select ( at the bottom ) Local in place of ssh , and type 'su' 2 times.
If you get permission denied, do what he's done in his PS http://android.modaco.com/index.php?s=&showtopic=309961&view=findpost&p=1335813

could you explain it for me ? how to do fastboot oem enableqxdm 0 in fastboot.....

 

[ilos]

you must have android sdk installed to use adb

When you have installed android sdk, go to tools directory, open a command prompt ( MSDOS ) , type 'adb shell' and 'fastboot oem enableqxdm 0'

after that, just reboot your device.

Look that for adb : http://forum.xda-developers.com/showthread.php?t=517874

 

[zorro12010]

you must have android sdk installed to use adb

When you have installed android sdk, go to tools directory, open a command prompt ( MSDOS ) , type 'adb shell' and 'fastboot oem enableqxdm 0'

after that, just reboot your device.

Look that for adb : http://forum.xda-developers.com/showthread.php?t=517874

what should i do after i reboot my device?
Win7 said he cant recognize the usb device.
is this good? dont you have the drivers or something?

 

[ilos]

what should i do after i reboot my device?
Win7 said he cant recognize the usb device.
is this good? dont you have the drivers or something?

see post #6


to be simple :

only the device will see your sdcard.. not your computer... all steps for unbrick must be done on the phone except the fastboot command

 

[zorro12010]

i also tried typing SU and sl
and instead of # it says sh-3.2#

 

[ilos]

so you are logged as root

just to be sure type : ls not sl

you will see same thing like my screenshoot posted early

now follow unbrick command

 

[smartsreenath]

you must have android sdk installed to use adb

when you have installed android sdk, go to tools directory, open a command prompt ( msdos ) , type 'adb shell' and 'fastboot oem enableqxdm 0'

after that, just reboot your device.

Look that for adb : http://forum.xda-developers.com/showthread.php?t=517874

thousand thanks......for you man.....i made it...........

 

[ilos]

congratulations !!!

 

[amlarabi]

Hi ..
I do not speak English well ،But I'm trying to understand
Please have the same problem, and tried to solve, but to no avail
at the above link in comment # 14




Thanks to Google Translate