[Q] Weird Digitizer!

[pyfviperx]

Hi! I replaced my digitizer on my atrix and after some time the screen is mis-calibrated... when i press on something, the touch is at the right position. But the top of the screen is not detected and the very bottom of the screen detect too far... is there a fix for this? See the attached picture!

I am on Atrics 2.0 but the issue was also present on neutrino rom 2.9
I thought the rom was to problem so its why I flashed Atrics 2.0 to see if the problem was still present and it is!

EDIT: I tried the pds fix ----> Didn't work (maybe because its the gingerbread one?)
Tried screen calibration app ----> Didn't work

 

[firecode95]

Hi! I replaced my digitizer on my atrix and after some time the screen is mis-calibrated... when i press on something, the touch is at the right position. But the top of the screen is not detected and the very bottom of the screen detect too far... is there a fix for this? See the attached picture!

I am on Atrics 2.0 but the issue was also present on neutrino rom 2.9
I thought the rom was to problem so its why I flashed Atrics 2.0 to see if the problem was still present and it is!

EDIT: I tried the pds fix ----> Didn't work (maybe because its the gingerbread one?)
Tried screen calibration app ----> Didn't work

If you have a PDS partition backup then you are lucky but if you haven't then I think it is just a touch configuration file fault, so better try to reverse all changes in pds partition, but better don't touch PDS partition files if you 100% don't know what you are doing. And please do not try restore other atrix PDS partition in your atrix because it can make more faults. (every atrix has diferent PDS bartition files)

 

[pyfviperx]

Too late i tried the pds fix but it didnt chnged anything except my mac adresses... Is the pds partition included in .sbf?

Sent from my Atrix 4G on Atrics 2.0 !

 

[jjwatmyself]

Where did you buy your digitizer? I've replaced three so far. The third was a disaster, which upon completing a 2nd time with a replacement from the seller was still junk. The point being that not all replacement digitizers are created equally.

 

[firecode95]

Too late i tried the pds fix but it didnt chnged anything except my mac adresses... Is the pds partition included in .sbf?

Sent from my Atrix 4G on Atrics 2.0 !

Well if you just change mac address then it can't bee the reason for this glich, I think than pds isn't included in sbf and if you don't want to brick your device stay away from sbf it's low level software who very fast can fail, just one number or charter and you are down.
You can try other digitizer to see if glich is on it too.

 

[pyfviperx]

This is a digitizer i bought from ebay, but it shipped from the states... its weird because typing with it is fine!

Envoyé depuis mon MB860 avec Tapatalk

 

[pyfviperx]

I Just wanted to tell everyone tant i fixed this by jamming a small paper between the digitizer cable and the frame so it is completely pressed down .

Sent from my MB860 using Tapatalk 2

 

[ranjithkumar1201]

Can you tell me how to use pds fix coz I thing my screen is also having a problem
Kindly help I have started a thread you can check in touchscreen issue
Sent from my MB860 using xda premium

---------- Post added at 07:19 PM ---------- Previous post was at 07:17 PM ----------

http://forum.xda-developers.com/showthread.php?t=2181311
Kindly in through and help others also facing the same problem

Sent from my MB860 using xda premium