[Q] WifiTether-TrevE Mod not working correctly

[t3hcoolness]

Hi, I've been trying to use Wifi Tether for the d2spr and I can't seem to get it working correctly. Here is the output of `tether start`, `tether stop`, and `tetherdebug.sh` which is a script put together by TrevE.
This should be enough information to figure this out, but I don't see why some of these errors are showing up.

Thanks in advance.

 

[t3hcoolness]

Self bump. Internet is down at my house so I really need this working!

Sent from my SPH-L710 using xda app-developers app

 

[Ragnar]

You went into settings and selected device s3? Then checked off both servers?

Transmitted with a portable device using Xparent Blue Tapatalk 2

 

[t3hcoolness]

Yup. Tried all related devices too. Generic, generic ICS, generic (wlan0/wlan1), etc.

Sent from my SPH-L710 using xda app-developers app

 

[dotNETProgrammer]

That's the very first app I tried after updating from MB1 to MD4.
I a stock rooted.

Here's my current settings, confirmed working via my desktop and my laptop.

Profile = Auto
Setup Method = Auto
Send netd max = checked
enable wifi encryption = checked
channel = 2
wifi driver reload = unchecked
wifi driver reload 2 = checked
access control = unchecked
mss clamping = checked
routing fix = checked

 

[t3hcoolness]

That's the very first app I tried after updating from MB1 to MD4.
I a stock rooted.

Here's my current settings, confirmed working via my desktop and my laptop.

Profile = Auto
Setup Method = Auto
Send netd max = checked
enable wifi encryption = checked
channel = 2
wifi driver reload = unchecked
wifi driver reload 2 = checked
access control = unchecked
mss clamping = checked
routing fix = checked

No dice. It "started with errors" and it always fails when "Configuring AP with Maxclient" and "Starting AP...". Everything else comes out Done though.

Here's the logcat when pressing start. https://gist.github.com/anonymous/a8594d0c0be781e3c5d9

 

[Neil Fruit]

Check your Superuser app. When I updated it installed Superuser..The TrevE mod only works with SuperSU. After reinstalling SuperSU mine works fine again.

 

[t3hcoolness]

Check your Superuser app. When I updated it installed Superuser..The TrevE mod only works with SuperSU. After reinstalling SuperSU mine works fine again.

Same thing. No difference.

 

[dotNETProgrammer]

Hhmm. I didn't pay attention if he changed the internal version numbers or not with the different releases when he was trying to get it to work right with the GS3's, but when I bring up the about screen it says, 3.2-beta2-modv5 ***Synergized***

 

[csmasn]

In Setup-Method select Netd-Ndc(master). And Wifi Driver reload 2. Also press menu and Select "install binaries".

Also disable Sprint connection optimizer.

Sent from my SPH-L710

 

[t3hcoolness]

Hhmm. I didn't pay attention if he changed the internal version numbers or not with the different releases when he was trying to get it to work right with the GS3's, but when I bring up the about screen it says, 3.2-beta2-modv5 ***Synergized***

It should be up to date. The version numbers shouldn't matter because others have got it working. I have all of the log information in this thread. All we have to do is figure out what the source of the errors is.

Once again, here's my phone info:

4.2.2
LiquidSmooth-JB-v2.2
Kernel: 3.4.39-leanKernel

 

[t3hcoolness]

In Setup-Method select Netd-Ndc(master). And Wifi Driver reload 2.

Those were my settings.

Also press menu and Select "install binaries".

Not an option on the newest version of the app. However I can confirm that I did see it say they installed.

Also disable Sprint connection optimizer.

Not supported on LiquidSmooth.

 

[csmasn]

Your are on AOSP? Use native tether. Wifi tether don't play well with AOSP.

Sent from my SPH-L710

 

[t3hcoolness]

Your are on AOSP? Use native tether. Wifi tether don't play well with AOSP.

Sent from my SPH-L710

Just tried this. Native tether allows me to connect to it, but no data is transferred.

EDIT: Tried this using "Native Framework Tether" and I could connect, but again, no data. Also, SSID was changed from what I set it as, to "TetherFallback"

 

[csmasn]

Well I'm not using AOSP now, but check if it have any kind of access control.

Sent from my SPH-L710

 

[topherk]

Just tried this. Native tether allows me to connect to it, but no data is transferred.

EDIT: Tried this using "Native Framework Tether" and I could connect, but again, no data. Also, SSID was changed from what I set it as, to "TetherFallback"

I don't know what you mean by "Native Framework Tether"? What settings did you go to? I have created an imgur album to show how I enable Wifi tethering on my phone. Check it out and verify this is how you're connecting.

 

[CNexus]

Just tried this. Native tether allows me to connect to it, but no data is transferred.

EDIT: Tried this using "Native Framework Tether" and I could connect, but again, no data. Also, SSID was changed from what I set it as, to "TetherFallback"

Make a hotspot with no security and try again

 

[t3hcoolness]

I don't know what you mean by "Native Framework Tether"? What settings did you go to? I have created an imgur album to show how I enable Wifi tethering on my phone. Check it out and verify this is how you're connecting.

With the newer version of TrevE mod, it comes with a way to make use of that method, while still able to use access control and show the amount of data, if I'm not mistaken. Didn't work.

Make a hotspot with no security and try again

No dice :/

 

[topherk]

Why are you so insistent on using the treve mod? It says on the thread http://forum.xda-developers.com/showthread.php?t=2224083 that it only works on 100% stock roms. It was never intended to work on aosp roms. I don't know how else I can say this to have it make sense...

Sent from my SPH-L710 using xda app-developers app

 

[t3hcoolness]

Why are you so insistent on using the treve mod? It says on the thread http://forum.xda-developers.com/showthread.php?t=2224083 that it only works on 100% stock roms. It was never intended to work on aosp roms. I don't know how else I can say this to have it make sense.../QUOTE]

The original wasn't working, and people were having more luck with TrevE. If I can get any kind of wifi tethering working, then I'd be happy.