[Q] wont boot after Juopunut Bear

[emitech21]

hello. i have a problem here which is after i doing Juopunut Bear, i cannot boot my handphone. i already follow a instruction from a

http://forum.xda-developers.com/showthread.php?t=1614617

http://www.flow-wolf.net/2012/09/how-to-s-off-htc-sensation-xe-4g.html

http://www.youtube.com/watch?v=pCwEbh_JsI8

i already made the last step about 30 times but i still didnt get the s-off

i try to reboot phone but cannot

i also try to make a recovery but phone wont go to the recovery..

help me please... i dont know what to do... HELP..HELP..

 

[ti0]

hi i had a sensation xe which i rooted before i may not be the most experienced but will try to help until someone more experienced comes along

Firstly does your phone turn on at all?

 

[emitech21]

hi i had a sensation xe which i rooted before i may not be the most experienced but will try to help until someone more experienced comes along

Firstly does your phone turn on at all?

yes my phone is turn on but with the screen Juopunut Bear only. i cannot make a factory reset.

 

[ti0]

I believe the jupontubear screen allows adb commands connect your phone to the computer and set up adb

Then type


adb reboot bootloader if that dosnt work then try

adb reboot recovery

I'm still a noob so take my information with caution and search on google first

 

[KiD3991]

Did the Juipunut Bear succeed? If no, you have to try till it does. (I did for 2 whole hours just to jolt till it works)

 

[emitech21]

Did the Juipunut Bear succeed? If no, you have to try till it does. (I did for 2 whole hours just to jolt till it works)

yes. it failed.. look i need to try also. thanks a lot for the info. how if Juipunut Bear not succeed. what can i do.

i got this message

first message error 66732337
2nd messange is error still sober

are you got this message too.

 

[emitech21]

Failed to enter recovery after s-off using Juopunutbear

Did the Juipunut Bear succeed? If no, you have to try till it does. (I did for 2 whole hours just to jolt till it works)

after i succeed Juopunutbear s-off then i remove the temproot-sensation-windows and after removo it. the Juopunutbear still have. in the hard reset screen top of the screen there have a text of Juopunutbear (its is normal) and why i can't access to the recovery. just like doing nothing. just back to hard reset main screen.

hard reset = i dont know what to call but on this screen have a hboot, fastboot, recovery, factory reset, simlock and image crc.

 

[rzr86]

after i succeed Juopunutbear s-off then i remove the temproot-sensation-windows and after removo it. the Juopunutbear still have. in the hard reset screen top of the screen there have a text of Juopunutbear (its is normal) and why i can't access to the recovery. just like doing nothing. just back to hard reset main screen.

hard reset = i dont know what to call but on this screen have a hboot, fastboot, recovery, factory reset, simlock and image crc.

flash the recovery again
the see if you have access

 

[emitech21]

flash the recovery again
the see if you have access

i just search for the flash recovery. but i can;t find the same situation same with me. any help or suggestion can u give. any link

 

[Choccie Milk]

I've taken this straight from the JuopunutBear website:

There are three ways to recover your ROM. Try each one in until you succeed:
Open the cmd prompt that is located in your ControlBear folder where you unzipped all of the files.

Type the following cmds into the cmd prompt.
1)ControlBear -r (This is run with the phone at the JuopunutBear/Arrow screen) If this succeeds recovery is complete otherwise continue to Step 2.
2)ControlBear -f (This is run with the phone at the fastboot screen). If this succeeds you're done otherwise continue to Step 3.
3)fastboot flash boot boot_backup.img
4)fastboot flash recovery recovery_backup.img (This is done with the phone in fastboot mode) If this succeeds continue to Step 5.
5)Boot the phone to android and install busybox from the market if not already installed.
6)adb push sdcard.img /data/local/tmp/
7)adb shell
8)$ su
9)# busybox dd if=/data/local/tmp/sdcard.img of=/dev/block/mmcblk1 conv=notrunc
10)Reboot the phone.

 

[emitech21]

I've taken this straight from the JuopunutBear website:

There are three ways to recover your ROM. Try each one in until you succeed:
Open the cmd prompt that is located in your ControlBear folder where you unzipped all of the files.

Type the following cmds into the cmd prompt.
1)ControlBear -r (This is run with the phone at the JuopunutBear/Arrow screen) If this succeeds recovery is complete otherwise continue to Step 2.
2)ControlBear -f (This is run with the phone at the fastboot screen). If this succeeds you're done otherwise continue to Step 3.
3)fastboot flash boot boot_backup.img
4)fastboot flash recovery recovery_backup.img (This is done with the phone in fastboot mode) If this succeeds continue to Step 5.
5)Boot the phone to android and install busybox from the market if not already installed.
6)adb push sdcard.img /data/local/tmp/
7)adb shell
8)$ su
9)# busybox dd if=/data/local/tmp/sdcard.img of=/dev/block/mmcblk1 conv=notrunc
10)Reboot the phone.

to do this. what condition of phone. in the JuopunutBear screen with an arrow or phone in the bootloader

 

[emitech21]

to do this. what condition of phone. in the JuopunutBear screen with an arrow or phone in the bootloader

i try with the phone in JuopunutBear screen with an arrow i already try 1,2,3 but at the step 3 the respond is waiting for device. then it not change at all. what should i do actually.

 

[emitech21]

to do this. what condition of phone. in the JuopunutBear screen with an arrow or phone in the bootloader

i already succeed the third one. but i dont understand the instruction no.5. did i need to boot phone

 

[rzr86]

i already succeed the third one. but i dont understand the instruction no.5. did i need to boot phone

probably yes
but if you fail to finish that process
then see here to flash a recovery
http://forum.xda-developers.com/showthread.php?t=1631861
only step 2