QPST flashing + VibeUI 3.1 S272 ROM + Unlock BL + TWRP + SuperSU + Region change
- Thread starter m0b
- Start date
@Smarty_009 this happened when I installed supersu via twrp.
I also tried to install P1a42_S288_160721_ROW_RAW_QFIL using QFIL but stuck on 'initializing' with lenovo Logo.
Looks like there is no way to boot normal. Should I visit service center?
I also tried to install P1a42_S288_160721_ROW_RAW_QFIL using QFIL but stuck on 'initializing' with lenovo Logo.
Looks like there is no way to boot normal. Should I visit service center?
I didn't understand what happened when you say this happened.
But in any case you don't need to go to service center. Be rest assured. I have had download failures many times. At times almost 15 times download failed but it was always due to the computer issues. After repeated attempts it always worked. Follow the stock rom recovery procedure without mistakes and be sure it will be successful.
I found one thing even if no rom and recovery is present then our mobile shows up a screen where just three options are displayed saying no system is present or something but from that state also I have recovered my phone.
Sent from my Lenovo P1a42 using XDA-Developers Legacy app
---------- Post added at 01:26 AM ---------- Previous post was at 01:20 AM ----------
Do you mean that after flashing super su you were stuck on flash screen. Then that's normal. Re root..... If still doesn't work just go to twrp then wipe only data, cache and dalvik cache. This will factory reset your rom. You don't need to re flash Complete rom.
And remember to follow step recommended in my previous post. First take twrp backup then root. So that you can recover later anytime.
If nothing works just flash recovery (twrp) using adb. Method posted on youtube link previously. It takes only few seconds. Then restore twrp backup and you are saved. It advisable that you make complete system backup on twrp.
Sent from my Lenovo P1a42 using XDA-Developers Legacy app
I followed every step said in video but i didn't get twrp. So I flashed twrp via adb and cleaned Cache, Data and Dalvik but still stuck on 'Initializing' Screen with Lenovo Boot Logo. It lasted until battery died.
And ADB is not detecting my phone now.
Charger is working fine but Led is not blinking.
I also tried to Force shut down by pressing Volume+ Volume- and power button simultaneously but it restarts again.
Also tried other key combinations but nothing worked. It only restarted once in Stock recovery when i was trying key combinations.
---------- Post added at 09:29 AM ---------- Previous post was at 08:30 AM ----------
Looks like I've got permanent twrp recovery.
I've to use 'Volume UP+Volume Down+Power Key' to restart and when it restarts just leave Power key but keep holding 'Volume UP+Down' Button until it shows twrp.
I just want to ask 'how to flash stock recovery via twrp' and where to find Stock Recovery. Bcoz service center guys will not accept it in this condition under warranty.
Or is there any thing I should try? Reflashing via QFIL didn't help as my phone stucks on 'initialising Screen.
Thanks a lot for help @Smarty_009
Update:
Wiped everything via twrp.
and then I flashed 'P1a42_S288_160721_ROW_RAW_QFIL' with xml file 'rawprogram0', it showed some errors before completion but phone restarted and working fine.
I've attached log file. Please check and let me know if it can cause any problem or I need to do something else.
Thanks again. @Smarty_009
Last edited:
Thanks @amitritu_1509 for providing correct Supersu. It works fine. Just rooted and granted permissions.
Thanks @Smarty_009 for mentioning post #82 and giving all steps. It was too easy.
Actually I was following steps as given in Video but there is a mistake in it and it should be corrected otherwise it will not work.
After flashing xml file and downloading process via QFIL we need to press and hold Volume UP+Down keys simultaneously till it boot into TWRP and then install 'UPDATE-SuperSU-v2.76-20160630161323' as said above.
Hey Smarty_009, tried flashing through QFIL (after taking TWRP backup) for 3rd time and it went through without any issues. Did not reboot intially since USB port was still connected, I guess. Then I went back into recovery and rebooted again after removing the USB cable and it rebootted fine. Checked root status through Root Checker and it said Rooted.
Thanks a ton for all your help, buddy.!
It would wait for some time then restart automatically. Anyways now it's working so great.
Large files may have been uploaded to google drive
Large files may have been uploaded to google drive
Large files may have been uploaded to google drive
Dear did not understand anything clearly. What do you expect exactly?.
Do you want Google Drive link of some big files?... Which one?
Sorry bro couldn't understand..
Please post in hindi or any other language whichever is comfortable. But please write in detail what is your problem and what you expect.
Last edited:
You mean you want s288 complete rom qfil flashable. Wait...
http://4pda.ru/forum/index.php?showtopic=703249&st=2840#entry51983275
https://yadi.sk/d/hY3kNWJGrnpCU
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
Hope this will be helpful.
i downloaded easyimage_S272 2 time. both time i received corrupted file which cannot be extracted.
please upload atleast this file to google drive for fast download.
please upload atleast this file to google drive for fast download.
You will need full rom s288. These uploaded files are not mine. I will have to upload whatever you want tomorrow. In India it's late night. Am sleeping now. Personal message me what you need I will upload tomorrow.
I'm facing the same problem..... I have patched Bootloader with QFIL nothing happens
When I reboot in fastboot after I have plugged the device, when I digit "adb devices" nothing appear. I have the P1C72
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone