QPST Help

[BlockOfDynamite]

First off, thanks for tolerating this somewhat noobish post, but I've searched through almost the whole internet trying to find answers.

Alright, so here's the dealio.
Sprint Galaxy Note 3. UICC unlocked via idoneapp, then used on domestic T-Mobile through GCF settings. I want to enable more bands as described in the following links: here and here.

I get as far as Step 9 in the second link. Then, I go to select a port, and it's not there. OK, so I uncheck the "diagnostic port only" check box, and select COM12 which is what my phone is on. No big deal, right? So I go to read/backup my NV and I start it; it only gets to 12% and says "Could not Communicate in Diagnostic Mode"

That's it. I've tried different USB ports, different USB cables, other USB modes on the phone, I even have a custom kernel. I really hope it's something obvious that I'm doing wrong instead of something that's a niche error.

Thanks, guys.

 

[BlockOfDynamite]

I ended up being able to read the LTE bands with DFS and write them with QXDM. The only thing is that there is no LTE/GSM/UMTS mode on the phone, so it's either LTE/CDMA or GSM/UMTS for now until I figure out if I can flash some other ROM to it to let it use the other bands, cause right now it only wants to look at band 25.

 

[BlockOfDynamite]

So I've been trying to flash the N900T MI7 modem/baseband on my N900P but I can never get it to flash in Odin. I've been able to put the modem and non-hlos in flash able zips and flash those but it never shows up. I've also tried to dd the files directly but that doesn't work either. Ideas?

 

[rbeavers]

I am impressed it's not bricked yet.

Sent from my SM-G935F using XDA-Developers mobile app

 

[vipsy6]

Same issue

First off, thanks for tolerating this somewhat noobish post, but I've searched through almost the whole internet trying to find answers.

Alright, so here's the dealio.
Sprint Galaxy Note 3. UICC unlocked via idoneapp, then used on domestic T-Mobile through GCF settings. I want to enable more bands as described in the following links: here and here.

I get as far as Step 9 in the second link. Then, I go to select a port, and it's not there. OK, so I uncheck the "diagnostic port only" check box, and select COM12 which is what my phone is on. No big deal, right? So I go to read/backup my NV and I start it; it only gets to 12% and says "Could not Communicate in Diagnostic Mode"

That's it. I've tried different USB ports, different USB cables, other USB modes on the phone, I even have a custom kernel. I really hope it's something obvious that I'm doing wrong instead of something that's a niche error.

Thanks, guys.

I am facing same issue regarding back up nv at 12%

 

[BlockOfDynamite]

I am facing same issue regarding back up nv at 12%

So basically what happened was I found a couple other tools to do what I wanted. First was DFS tool. This works well, because it can both read and write bands to the nv of the phone. I forget what the second was, but it could both read and write the raw value of any given value in the nvram. I'll have to dig through my stuff again if you want to know what the second program was. The fact of the matter is that I was never able to get it working right. The phone always looked at band 25 LTE no matter what bands I turned on/off of the phone.

 

[vipsy6]

another ?

So basically what happened was I found a couple other tools to do what I wanted. First was DFS tool. This works well, because it can both read and write bands to the nv of the phone. I forget what the second was, but it could both read and write the raw value of any given value in the nvram. I'll have to dig through my stuff again if you want to know what the second program was. The fact of the matter is that I was never able to get it working right. The phone always looked at band 25 LTE no matter what bands I turned on/off of the phone.

Please let me know second program

 

[walidham]

First off, thanks for tolerating this somewhat noobish post, but I've searched through almost the whole internet trying to find answers.

Alright, so here's the dealio.
Sprint Galaxy Note 3. UICC unlocked via idoneapp, then used on domestic T-Mobile through GCF settings. I want to enable more bands as described in the following links: here and here.

I get as far as Step 9 in the second link. Then, I go to select a port, and it's not there. OK, so I uncheck the "diagnostic port only" check box, and select COM12 which is what my phone is on. No big deal, right? So I go to read/backup my NV and I start it; it only gets to 12% and says "Could not Communicate in Diagnostic Mode"

That's it. I've tried different USB ports, different USB cables, other USB modes on the phone, I even have a custom kernel. I really hope it's something obvious that I'm doing wrong instead of something that's a niche error.

Thanks, guys.

hi
how did you connect QPST to your phone? i can't do it,
installed QPST under windows 7, QDXM and kies, but in QPST configuration i get "No Phone" when added new port

 

[BlockOfDynamite]

hi
how did you connect QPST to your phone? i can't do it,
installed QPST under windows 7, QDXM and kies, but in QPST configuration i get "No Phone" when added new port

I never did get QPST to connect to my phone. I think I was able to get it to see the phone at some point, but it would never read anything from it or write anything to it. The program always froze up or something when I tried that. If I could remember the second program I used, I'd share it with you all, but for the life of me, I can't think of it.

Edit: Oh hey, the two programs I used are RIGHT IN MY SECOND POST. lol. Yeah, use DFS tool to read the NV and QXDM to write the NV. It'll save you a whole lot of trouble over doing stuff with QPST.

 

[walidham]

I never did get QPST to connect to my phone. I think I was able to get it to see the phone at some point, but it would never read anything from it or write anything to it. The program always froze up or something when I tried that. If I could remember the second program I used, I'd share it with you all, but for the life of me, I can't think of it.

Edit: Oh hey, the two programs I used are RIGHT IN MY SECOND POST. lol. Yeah, use DFS tool to read the NV and QXDM to write the NV. It'll save you a whole lot of trouble over doing stuff with QPST.

Hi
Yes i used only DFS tools and it work fine, also and changed my Bands 4G and 3G to work in Europe with Spint N900P phone,
3G work fine but not 4G, i will install custom Rom and see if it will work.

 

[BlockOfDynamite]

Hi
Yes i used only DFS tools and it work fine, also and changed my Bands 4G and 3G to work in Europe with Spint N900P phone,
3G work fine but not 4G, i will install custom Rom and see if it will work.

Well, 3G will work fine without changing anything anyway. All of the bands are already enabled. 4G is the issue.

 

[walidham]

Well, 3G will work fine without changing anything anyway. All of the bands are already enabled. 4G is the issue.

Yes 4G is the big pb, i found that DFS Tools write 3G bands but for LTE, the issue is in BC Config Div, need SPC code
i tried to find SPC /MSL code but no chance
I will install SPR-N900PVPUBMJ4 rom and after SPR-N900PVPUBMJ3 modem and use DSF tools to set it 000000
hope i will work

 

[BlockOfDynamite]

Yes 4G is the big pb, i found that DFS Tools write 3G bands but for LTE, the issue is in BC Config Div, need SPC code
i tried to find SPC /MSL code but no chance
I will install SPR-N900PVPUBMJ4 rom and after SPR-N900PVPUBMJ3 modem and use DSF tools to set it 000000
hope i will work

Flash the MI3 (that's emm eye three) modem and then use the app included in the zip file to find the MSL code. Here's a link to the zip file: http://bit.ly/1oZDO9t

I was not aware that you could change the MSL code with DFS tools. At least I have a Verizon Note 3 now, so I have a lot more LTE bands than the Sprint version does (although I don't care all that much; I think I may switch to the Nexus 6 soon). But yeah, try the stuff in the zip file from the link, and you should be able to

• Find your MSL code
• Unlock your phone internationally
• Use hidden menus

Most of all, have fun! I know for sure this can be very very frustrating a lot of the time, but if you don't have fun, then I don't think there's much profit in trying stuff like this. Good luck!

 

[walidham]

Flash the MI3 (that's emm eye three) modem and then use the app included in the zip file to find the MSL code. Here's a link to the zip file: http://bit.ly/1oZDO9t

I was not aware that you could change the MSL code with DFS tools. At least I have a Verizon Note 3 now, so I have a lot more LTE bands than the Sprint version does (although I don't care all that much; I think I may switch to the Nexus 6 soon). But yeah, try the stuff in the zip file from the link, and you should be able to

• Find your MSL code
• Unlock your phone internationally
• Use hidden menus

Most of all, have fun! I know for sure this can be very very frustrating a lot of the time, but if you don't have fun, then I don't think there's much profit in trying stuff like this. Good luck!

After many try, finaly i get my MSL code (24 hours).

I have downgrad my phone to 4.4.2, and install custom rom Galaxy-Note-fre3-2.26,
and after using adb and logcat i got my code.
Now how can i activate it for internationally ? i have added all LTE band (3,7,20) but still H+
I will try with QXDM, but i have windows 10 and give me error acces denied.

 

[BlockOfDynamite]

After many try, finaly i get my MSL code (24 hours).

I have downgrad my phone to 4.4.2, and install custom rom Galaxy-Note-fre3-2.26,
and after using adb and logcat i got my code.
Now how can i activate it for internationally ? i have added all LTE band (3,7,20) but still H+
I will try with QXDM, but i have windows 10 and give me error acces denied.

I just did it with my Verizon Note 3 on Windows 10, so I know it's not a Windows 10 issue. Also, QPST seemed to work with my Verizon phone but not my Sprint phone. Weird. Make sure you're running QXDM as administrator. Also, I unlocked all of the LTE bands in this way but I can't seem to get LTE from my GSM sim card, even by going into the service mode and enabling all LTE bands.

 

[walidham]

I just did it with my Verizon Note 3 on Windows 10, so I know it's not a Windows 10 issue. Also, QPST seemed to work with my Verizon phone but not my Sprint phone. Weird. Make sure you're running QXDM as administrator. Also, I unlocked all of the LTE bands in this way but I can't seem to get LTE from my GSM sim card, even by going into the service mode and enabling all LTE bands.

Yes; for LTE i found in hiddn menu, that they use Tri Bands (25, 26 & 41), so for others bands will not work.
I don't know how i can disable this and force it to use bands 3, 7 20.

 

[BlockOfDynamite]

Yes; for LTE i found in hiddn menu, that they use Tri Bands (25, 26 & 41), so for others bands will not work.
I don't know how i can disable this and force it to use bands 3, 7 20.

I honestly couldn't tell you, and I'm not sure how much help I'm going to be in general. I've tried it on both of my Note 3 phones but have had no confirmed success. Sprint especially is the one carrier that sticks out like a sore thumb, and by association, so do their phones. I've had plenty of frustration on that front, that's for sure.

 

[walidham]

I honestly couldn't tell you, and I'm not sure how much help I'm going to be in general. I've tried it on both of my Note 3 phones but have had no confirmed success. Sprint especially is the one carrier that sticks out like a sore thumb, and by association, so do their phones. I've had plenty of frustration on that front, that's for sure.

Thanks for your help,
Just one question if have any idea for it
can i install Firmware N9005 using PIT file for N90005 in N900P?
Because when i received my phone(from china) , the first time i see that BaseBand version is for n9005 and phone name n900 but in download mode i see n900p
i think chines have a method to do it

 

[BlockOfDynamite]

Thanks for your help,
Just one question if have any idea for it
can i install Firmware N9005 using PIT file for N90005 in N900P?
Because when i received my phone(from china) , the first time i see that BaseBand version is for n9005 and phone name n900 but in download mode i see n900p
i think chines have a method to do it

Maybe. Really they have a method to do anything I would advise against trying to do that, although I'm not sure what harm it could do if you can still get back into download mode. I've tried flashing different versions' firmware to the N900P with no success.