[r71] arter97 kernel for OnePlus 7 series

Search This thread

ifyoulike97

Member
Apr 22, 2015
6
0
You only need to flash the f2fs live formater via franco kernel manager... Phone reboots and you can setup it again with f2fs :)

So in my case, OP7 Pro non T, step by step:
1. Flash f2fs live formater via franco kernel manager, then reboot
2. Enter twrp, wipe data and system to f2fs
3. Install OTA rom
4. Flash lasted arter kernel in franco kernel manager or twrp
5. Finally, flash f2fs-optimize.zip in franco kernel manager or twrp

It's correctly step for installation? Tks for your help! :fingers-crossed:
 
Last edited:

Goku1992

Senior Member
  • Feb 29, 2016
    663
    133
    Dortmund
    So in my case, OP7 Pro non T, step by step:
    1. Flash f2fs live formater via franco kernel manager, then reboot
    2. Enter twrp, wipe data and system to f2fs
    3. Install OTA rom
    4. Flash lasted arter kernel in franco kernel manager or twrp
    5. Finally, flash f2fs-optimize.zip in franco kernel manager or twrp

    It's correctly step for installation? Tks for your help! :fingers-crossed:

    Sorry mate thought you were on 7t pro :) with 7 pro you can wipe data to f2fs via twrp.
    Then you need to flash f2fs-optimize.zip via twrp.
    Reboot and setup the device :)
     

    ifyoulike97

    Member
    Apr 22, 2015
    6
    0
    Sorry mate thought you were on 7t pro :) with 7 pro you can wipe data to f2fs via twrp.
    Then you need to flash f2fs-optimize.zip via twrp.
    Reboot and setup the device :)

    It happen again, when i wipe data to f2fs, i can't copy anything in my storage


    Please help!
     

    Attachments

    • 20201130_200900.jpg
      20201130_200900.jpg
      256.4 KB · Views: 180
    Last edited:

    Zhuang zhuang

    Senior Member
    Apr 16, 2016
    167
    52
    Ho Chi Minh
    Hey I cable is connected in the right way. But I found the problem. Everytime I use other charger then original. I need to reboot the cellphone to charge my battery. Its very strange and kernel related.

    After reboot the charger works like expected. With original charger I don't have any problem.

    Now I need reboot my cellphone every day to charge. I tryd differed chargers as well.

    @arter97

    If you need some logs let me know

    I had same issue with latest r63b2. Mine is OP7Pro
     

    sysak

    Senior Member
    Sep 17, 2013
    217
    97
    Hio guys any installation methods or custom versions of this kernel which would work with GM1920 (7 Pro 5G EU) on OOS?
    Don't care if the 5g connectivity is there after since I don't use it.

    The only kernel I found working is ElementalX but that's not really what I'm after
     

    flar2

    Recognized Developer
    Jun 11, 2012
    18,549
    87,317
    Southwestern Ontario
    elementalx.org
    Hio guys any installation methods or custom versions of this kernel which would work with GM1920 (7 Pro 5G EU) on OOS?
    Don't care if the 5g connectivity is there after since I don't use it.

    The only kernel I found working is ElementalX but that's not really what I'm after

    What are you after? ElementalX is super stable, always up to date and has all custom kernel features.
     
    • Like
    Reactions: Goku1992

    AmirHRC

    Senior Member
    Aug 21, 2018
    346
    469
    Arter yea its a nice kernel but in terms of speed nothing compared to yours :)
    you must show respect to developer like @flar2
    elementalx rom is very known and Lot's of website class it the first im using her kernel from the nexus 6 day's we are hoping to do another last build for nexus 6 just to make this device amazing again
     

    Goku1992

    Senior Member
  • Feb 29, 2016
    663
    133
    Dortmund
    you must show respect to developer like @flar2
    elementalx rom is very known and Lot's of website class it the first im using her kernel from the nexus 6 day's we are hoping to do another last build for nexus 6 just to make this device amazing again
    I have written its nice and yeah it is :) but in terms of speed arter kernel ist really better :) i had used elemental kernel long time ago :)
     

    sysak

    Senior Member
    Sep 17, 2013
    217
    97
    What are you after? ElementalX is super stable, always up to date and has all custom kernel features.
    Don't mind me because I know very little about the ways in which kernel and it's components impact performance so I may be talking complete nonsense. Before getting the 7 pro I had a pixel 3a. For ages I have used the Galt's Gulch kernel, but after the Android 11 came out that wasn't available right away so I ran stock for a while and noticed a drop off in performance which made the phone a bit unpleasant to use. Then ElementalX came out for it so I tried it and I felt it made no difference whatsoever. Soon after John released Gulch for A11 and the smoothness was back like with a touch of a magic wand. I'm not after custom settings, in fact I want as little of them as possible, rather would like the optimal preset with merged in the best bits from other sources to maximise the performance and power efficiency. ElementalX covers lots of devices and comes with a great app but seems to have lighter touch to it. Seeing how it's still based on 4.14.117 like the factory kernel and clang 10 plus reading the changelogs which focus on maintaining compatibility makes me want to try something that was tinkered with more and arter97 kernel seems to be exactly that. Like I said this is just my opinion which is likely invalid as it' based on a single experience and very little proper understanding or knowledge so please do not feel offended as I don't want to diminish your hard work and feel free to tell me otherwise. 😅
     
    • Like
    Reactions: knpk13

    slgooding

    Senior Member
    Oct 6, 2011
    693
    231
    West Lafayette
    OnePlus 7 Pro
    i have wonder if possible fix for wifi drops connectivity in common use in kernel side.. and idont find anything

    Several things could cause this. Android has a setting that will drop the wifi if the connection is not good. Is it dropping when you are in a stationary location and have a very good signal? Don't go by the bars, check the actual signal strength.
     

    arter97

    Recognized Developer
    Oct 14, 2012
    3,768
    33,800
    23
    Seoul
    r63 is now out.

    A major update since r62.

    r63
    mmap/mremap, TLB invalidation, mmu_gather backported from mainline for a major performance boost
    (Including https://www.phoronix.com/scan.php?page=news_item&px=Linux-5.10-Mremap-Optimization )
    Disabled PG table mapping for swap memory allocator (increased performance for 64-bit)
    Saved 48 MB of RAM by removing unused reserved regions
    Applied MAC fall-through patch for Chinese users
    LA.UM.8.1.r1-16300-sm8150.0 merged
    Linux v4.14.212 merged
    Wi-Fi drivers reverted to 5.2.03.31L to fix compatibility issues
    2020-12-05 security patch merged
    WireGuard updated to v1.0.20201112
    Merged OnePlus kernel changes

    Since r63b2:

    r63
    Disabled PG table mapping for swap memory allocator (increased performance for 64-bit)
    Linux v4.14.212 merged
    Wi-Fi drivers updated to 5.2.03.31L
    2020-12-05 security patch merged
     

    krecycle

    New member
    Dec 20, 2020
    3
    0
    Excuse me! Since r63b1, many Hydrogen OS users are all having an issue that suddenly frozen and reboot after using this kernel on 7pro. In my phone which in 10.0.10 GM21, it will still reboot on r63 stable. It's no problem before r62.:cry:
     
    Last edited:

    Top Liked Posts

    • There are no posts matching your filters.
    • 12
      Nothing too exciting.

      r71

      Merged f2fs fixes from mainline (fixes quota inode corruptions)
      Linux v4.14.233 merged
      Wi-Fi drivers updated to 5.2.03.32J
      Sultan's Simple LMK updated
      1
      Hi everybody.
      I am using oneplus 7 pro version 10.3.4 GM21AA. when i root the device i have full access to android system but when i flash r70 kernel i found 2 The system directories that cannot be mounted to r/o are system/product/App and system/product/pri-app. I want to know is it because of this kernel or because of twrp i use it or not, if because of twrp, is there any way i can convert data to f2fs using f2fs-liveformat and without using twrp on oneplus 7 pro, because the information is liveformat only for 7t and 7t pro.
      Thank you
      1
      Why do y'all keep asking lol? I'm sure once it supports 11 arter will let you know in his changelog.

      Until then: No, for OOS 10 only.
    • 166
      arter97.png

      arter97 kernel for OnePlus 7 series running OxygenOS​

      /* Features */

      Supports OnePlus 7, OnePlus 7 Pro, OnePlus 7T and OnePlus 7T Pro
      Fully rebased kernel without unnecessary OnePlus' code
      Latest CAF msm-4.14 kernel fully merged
      Using zswap + vnswap to replace zram
      - Ditched conventional zram swap approach for more efficient memory operations
      - Backported zsmalloc memory allocator from mainline
      - Backported zswap compressed page cache from mainline
      - Samsung's Galaxy S9 memory modifications merged for better swapping efficiency tuned for Android
      Use CONFIG_HZ = 300
      Optimized power configuration
      BBR as the default TCP network congestion control
      vDSO 32 patches to improve 32-bit performance
      vmalloc backported from mainline to improve memory allocation performance
      Latest Linux 4.14 subversion merged
      DM-verity fully disabled (you can remount /vendor to R/W properly)
      Timer optimizations
      Additional power savings applied to the display panel
      RTL8152/8153 USB LAN adapter support
      Passes SafetyNet
      Built with -O3 speed optimizations
      Built with latest GCC
      UFS optimizations
      Entropy hook on storage removed
      Latest mainline f2fs support with GC fixes
      CFQ I/O scheduler backported from mainline
      Systemless installation (the kernel doesn't touch /system or /vendor)
      Modules support disabled for lighter kernel
      WireGuard support
      Removed RTB(interrupt) logging entirely
      No VLAs(info)
      A whole lot more...

      /* Details */

      - Fully rebased kernel without unnecessary OnePlus' code -

      This kernel is not based on stock OxygenOS kernel source provided by OnePlus. Instead, it’s based on the latest and greatest Qualcomm has to offer. Only the necessary parts from the OnePlus kernel has been cherry-picked, such as OnePlus 7 specific device drivers.

      This brings 2 major changes: less debugging code and an overall lighter kernel.

      There are miscellaneous changes made by OnePlus that are supposed to maximize utilization of system memory. But seeing how it’s implemented(heavily relying on zram and a physical writeback swapfile), I decided to remove it entirely.

      Users are recommended to disable the “RAM Boost” feature from Settings > System > RAM Boost.

      Due to the completely different base, the memory management with this kernel will be drastically different from other kernels.

      - Latest CAF msm-4.14 kernel fully merged -

      This kernel is also constantly merging the latest Qualcomm Android 4.14 kernel. This tag contains more up-to-date changes from Qualcomm than the regular Snapdragon 855 tag(sm8150).

      - Use CONFIG_HZ = 300 -

      This changes the context switching interval from 10ms to 3.33ms. Pixel used this for years and Google recommends other vendors to do the same for less jitter.

      This is even more important on displays with higher refresh rates.

      - Optimized power configuration -

      Stock OnePlus configuration forces display-related processes to use the Gold cluster(formerly known as big cores) exclusively.
      This configuration brings a huge power regression since it makes every frame dispatch to wake up and use Gold cores.

      This kernel resets this profile to use the configuration Google recommends, which is to use the Silver cluster(formerly known as LITTLE cores) exclusively instead. No performance penalty was noticed with this change while massively improving battery life.

      - BBR as the default TCP network congestion control -

      BBR is a (relatively)new TCP congestion control developed by Google, and it’s regarded as one of the best things you could do to your network configuration. You can find its benefits easily just by Googling BBR. I’ve been personally running BBR for months on various Linux machines including the server running arter97.com and it’s been great.

      Now that our Android kernel is running v4.14, I’ve enabled BBR and backported other BBR changes from mainline.

      /* Notice */

      5G variant is unsupported.
      Only OxygenOS is supported, but it is likely that the kernel will work with other ROMs. Though you may encounter minor issues.
      Feel free to tip me which commits are needed to fix other ROMs.

      /* f2fs */

      OnePlus 7T and OnePlus 7T Pro users cannot use f2fs without involving heavy and risky repartitioning operations due to Dynamic Partitions.
      r61+ allows using f2fs on OnePlus 7T and OnePlus 7T Pro.

      This kernel fully supports f2fs for /data and I encourage everyone to use f2fs with my kernel for better performance.
      See here as to why you might want f2fs.

      The process differs with T and non-T series.

      /* T variants */


      The kernel now detects whether the userdata is in f2fs format and patches fstab on boot for OnePlus 7T and 7T Pro users during boot.
      This is done in a volatile manner, which means your system files are not modified and using other kernels will revert the effect.
      This is half of the puzzle.

      The other half of the puzzle is to getting userdata partition into the f2fs format.
      Due to lack of a proper recovery for the OnePlus 7T, I patched up f2fs-tools to support formatting while the Android is up and running.
      You can use Franco Kernel Manager's flasher to flash the live-formatter.

      This obviously removes all data on the device.
      Please make sure your data is fully backed-up.


      f2fs live-formatter:
      https://arter97.com/browse/f2fs/liveformat

      Existing f2fs users won't be affected by any of these changes.
      Note that the OnePlus 7T and 7T Pro's OxygenOS has an issue handling FBE(File-Based Encryption) with f2fs(which is presumably why they left it out while the OnePlus 7 Pro had it), and encryption will be disabled when you use my kernel's f2fs live-patching feature.

      Without encryption, your entire data will be in danger if you lose your device.
      Please use f2fs if you understand this trade-off.
      (Non-T series users can safely use f2fs with encryption.)


      f2fs installation steps:
      1. Download and install my kernel.
      2. Download and install f2fs live-formatter.

      OxygenOS OTA steps:
      1. Install OTA and DO NOT reboot.
      2. Download and install my kernel using Franco Kernel Manager.
      3. Reboot.

      Re-format into ext4 steps:
      1. Use stock recovery and perform a factory reset.

      Re-format into f2fs steps:
      1. Use stock recovery and perform a factory reset and turn the userdata back to ext4.
      2. Reboot to Android.
      3. Download and install f2fs live-formatter using Franco Kernel Manager.


      /* Non-T variants */


      TWRP is not integrated to the kernel.
      Please use a TWRP installer to install TWRP on top of my kernel.

      To use f2fs, simply format /data to f2fs with TWRP.

      Afterwards, flash f2fs-optimize.zip from http://arter97.com/browse/f2fs/optimize

      There’s no need to flash separate zip files for replacing f2fs-tools or fstab.


      /* Disclaimer */

      Your warranty is now void.
      I am not responsible for bricked devices, dead SD cards,
      thermonuclear war, or you getting fired because the alarm app failed. Please
      do some research if you have any concerns about features included in this kernel
      before flashing it! YOU are choosing to make these modifications, and if
      you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.

      /* Thanks to */

      TheCrazyLex
      xboxfanj
      kdrag0n
      nathanchance - for android-linux-stable

      /* Instructions */

      1. Read the above. Please.
      2. Flash the zip file from your existing TWRP recovery.
      2.1. FK Kernel Manager also works for installation. EXKM is unsupported and reported to brick the device due to installation failures.

      /* Downloads and links */

      r30 and up only supports Android 10
      arter97.com
      Kernel source

      XDA:DevDB Information
      arter97 kernel for OnePlus 7, Kernel for the OnePlus 7 Pro

      Contributors
      arter97
      Source Code: https://github.com/arter97/android_kernel_oneplus_sm8150

      Kernel Special Features:

      Version Information
      Status: Stable

      Created 2019-07-28
      Last Updated 2020-10-18
      56
      A major update r50b1 is up.
      This isn't for PA. This version is for OxygenOS.

      Recent OnePlus' kernel breakage forced me to look into cleanly disabling OnePlus brain service, and I think I managed to remove it "just enough".

      Similar to how my Pie kernel was made, r50b1 now removes pretty much all of OnePlus' own kernel hacks. As a result, users no longer have to worry about recent OxygenOS version's compatibility issues.

      Since we no longer need OnePlus' hacks, the kernel has also been rebased cleanly on top of latest Qualcomm's Android 4.14 kernel and incorporates more patches that I missed previously.

      As this new r50 version differs significantly from my previous Q kernels, I felt the need to mark this as a beta for possible regressions, but I've been using the new kernel for couple of days now and I'm happy with the results.

      You may experience differences with battery life or general performance, both positively and negatively.
      Please share your feedback.

      r50b1
      Cleanly rebased version
      OnePlus performance boost hacks removed
      LV.AU.0.2.0-00810-gen3meta.0 merged
      Latest OnePlus changes merged
      Latest f2fs-stable merged
      Linux v4.14.159 merged
      Latest Qualcomm's Android 4.14 kernel merged
      (LA.UM.8.1.r1-12800-sm8150.0, LA.UM.8.11.r1-01900-NICOBAR.0, LA.UM.8.9.r1-07100-SM6xx.0)
      Wi-Fi drivers updated to 5.2.03.16T
      52
      r32 is up for a decent improvements.

      r32
      Ported patches from Razer Phone 2 to improve touchboost and general performance (by TheCrazyLex)
      Linux v4.14.151 merged
      Ported patches from LA.UM.8.9.r1-05300-SM6xx.0
      Wi-Fi drivers updated to 5.2.03.14L
      Memory management patches applied from kdrag0n kernel
      47
      /* Changelog */

      r71


      Merged f2fs fixes from mainline (fixes quota inode corruptions)
      Linux v4.14.233 merged
      Wi-Fi drivers updated to 5.2.03.32J
      Sultan's Simple LMK updated

      r70

      zswap + vbswap replaced with zram

      Commits backported from mainline to improve lz4 performance (better memory performance)
      LA.UM.8.1.r1-17100-sm8150.0 merged
      Linux v4.14.231 merged
      Wi-Fi drivers updated to 5.2.03.32G
      2021-04-05 security patch merged
      RTL8152/8153 drivers updated
      Merged optimizations from Sultan

      r65

      Enabled SECCOMP to address recent security vulnerability issue
      LA.UM.8.1.r1-16900-sm8150.0 merged
      Linux v4.14.226 merged
      Wi-Fi drivers updated to 5.2.03.32E
      2021-03-05 security patch merged
      WireGuard updated to v1.0.20210219
      Merged mainline f2fs fixes
      Merged optimizations from Sultan

      r64
      Merged mmap/mremap fixes from upstream to fix some Chinese apps causing reboots
      Merged mremap optimization from upstream (~19x speed up)

      r63
      mmap/mremap, TLB invalidation, mmu_gather backported from mainline for a major performance boost
      (Including https://www.phoronix.com/scan.php?page=news_item&px=Linux-5.10-Mremap-Optimization )
      Disabled PG table mapping for swap memory allocator (increased performance for 64-bit)
      Saved 48 MB of RAM by removing unused reserved regions
      Applied MAC fall-through patch for Chinese users
      LA.UM.8.1.r1-16300-sm8150.0 merged
      Linux v4.14.212 merged
      Wi-Fi drivers reverted to 5.2.03.31L to fix compatibility issues
      2020-12-05 security patch merged
      WireGuard updated to v1.0.20201112
      Merged OnePlus kernel changes

      r62
      A major memory management issue fixed for 6GB variants
      A scheduler patch from Pixel merged to improve power consumption
      Reverted drm changes from July to fix intermittent frame drops (mostly noticeable from app open/close animations)
      Linux v4.14.202 merged (includes a fix for critical Bluetooth vulnerability "BleedingTooth")
      Thanks to @idkwhoiam322 and @NTLinhHaHa for this release

      r61
      SELinux is now set to enforcing
      f2fs fstab live-patching implemented to allow f2fs on OnePlus 7T and 7T Pro users
      Memory swap's aggressiveness tuned to reflect the device's RAM size
      Wi-Fi driver backported from LA.UM.9.12.r1-08400-SMxx50.0
      (The version jumped from 5.2.03.31A to 5.2.022.4J)
      Merged LE.UM.3.3.2-09000-SDX55 tag
      OnePlus brain service is disabled in a cleaner manner
      Disabled f2fs' background GC

      r60
      Applied a fix for rare random reboots since r57
      The entire SELinux subsystem backported from mainline Linux for better performance and efficiency
      (Magisk users must use Magisk v21.0 or the kernel will not boot)

      LA.UM.8.1.r1-16000-sm8150.0 merged
      Linux v4.14.200 merged
      Wi-Fi drivers updated to 5.2.03.31A
      Now built with GCC 10.2
      2020-09-05 security patch merged
      WireGuard updated to v1.0.20200908
      Sultan's Simple LMK updated
      Merged optimizations from kdrag0n
      Latest f2fs-stable merged

      r58
      LA.UM.8.1.r1-15400-sm8150.0 merged
      Linux v4.14.188 merged
      Wi-Fi drivers updated to 5.2.03.27R
      Minor trivial optimizations

      r57
      Linux v4.14.186 merged
      Wi-Fi drivers updated to 5.2.03.27K
      LE.UM.4.3.3.r1-00500-SDX55 tag merged
      Minor memory optimization to the graphics drivers (by Yaro330)

      r56
      Merged OnePlus kernel changes to support optimized charging
      Bunch of memory allocations from various subsystems were reworked to perform much better
      Now built with GCC 10.1
      2020-06-05 security patch merged
      Linux v4.14.183 merged
      Latest Qualcomm's Android 4.14 kernel merged
      Wi-Fi drivers updated to 5.2.03.26Q
      WireGuard updated to v1.0.20200520
      Sultan's Simple LMK updated
      Merged optimizations from kdrag0n
      Latest f2fs-stable merged

      r54
      Switched to Sultan's Simple LMK to fix lags and stalls on memory-pressured scenarios
      Disabled scheduler debug for better performance
      Reduced memory allocations on network sockets
      Reworked and optimized vnswap (renamed to vbswap)
      Reworked Wi-Fi configuration
      USB UASP enabled
      Minor fixes to previous memory optimization commits
      LV.AU.0.2.0-01800-gen3meta.0 merged
      2020-03-05 security patch merged
      Linux v4.14.173 merged
      Latest Qualcomm's Android 4.14 kernel merged
      Wi-Fi drivers updated to 5.2.03.22Q

      r52
      Fixed slow boot issue on OnePlus 7T series

      r51
      Fixed Wi-Fi not working on some devices due to MAC address loading failures
      Backported Android ion driver from Snapdragon 865 kernel
      Latest f2fs-stable merged
      Linux v4.14.170 merged
      Latest Qualcomm's Android 4.14 kernel merged
      Wi-Fi drivers updated to 5.2.03.19P

      r50
      Beta details
      Cleanly rebased version
      OnePlus performance boost hacks removed
      Random reboots with WireGuard fixed
      Random reboots with f2fs encryption fixed
      Added vibration level control (by flar2)
      Few patches from LE.UM.4.1.1-02910-sa515m merged including scheduler improvements
      LV.AU.0.2.0-00810-gen3meta.0 merged
      Latest OnePlus changes merged
      Latest f2fs-stable merged
      Linux v4.14.163 merged
      Latest Qualcomm's Android 4.14 kernel merged
      Wi-Fi drivers updated to 5.2.03.18B

      r40
      OnePlus 7T and OnePlus 7T Pro support added
      Added support for flashing via FK Kernel Manager
      Major optimizations to touch panel drivers for lower overheads
      Merged a zswap patch for faster lookups - better memory swap performance
      Disabled unnecessary kernel log writeback debug feature
      Linux v4.14.156 merged
      Latest Qualcomm's Android 4.14 kernel merged
      (LA.UM.8.1.r1-12200-sm8150.0, LA.UM.8.11.r1-01800-NICOBAR.0, LA.UM.8.9.r1-06500-SM6xx.0)
      Wi-Fi drivers updated to 5.2.03.15T
      exFAT drivers added
      WireGuard updated to 20191127

      r33
      LA.UM.8.1.r1-10700-sm8150.0 merged

      r32
      Ported patches from Razer Phone 2 to improve touchboost and general performance (by TheCrazyLex)
      Linux v4.14.151 merged
      Ported patches from LA.UM.8.9.r1-05300-SM6xx.0
      Wi-Fi drivers updated to 5.2.03.14L
      Memory management patches applied from kdrag0n kernel

      r31
      Integrated Google Camera AUX mod
      (No need to use a separate Magisk Module)
      LA.UM.8.1.r1-10300-sm8150.0 merged
      Linux v4.14.150 merged
      WireGuard updated to 20191012
      Backported patches from LA.AU.0.0.2.c1-07610-gen3meta.0

      r30
      Rebased the kernel for Android 10 (based on LA.UM.8.1.r1-09500-sm8150.0)
      Applied zswap + vnswap for replacing zram
      Wi-Fi drivers updated to 5.2.03.13O
      Linux v4.14.148 merged
      Latest OnePlus changes merged
      Latest f2fs-stable merged
      Backported BBR TCP congestion control patches (by kdrag0n)
      Switched to AnyKernel3
      r30 won't work with the OnePlus 7T

      r25

      Linux v4.14.141 merged
      Merged additional f2fs bug-fixes
      Kernel download size reduced
      LA.AU.0.0.1-15710-gen3meta.0 merged as an extension of SDX55 merge (contains various patches including scheduler enhancements)
      GPU runtime overhead reduced
      Garbled sound with type-C wired headphones fixed
      General stability improvements

      r24
      Fixed a display-related patch introduced in r20 that may cause severe memory leakage and freezes

      r23
      Fixed yet another recent f2fs rapid GC changes that caused an indefinite wakelock
      Reverted TCP backports and cherry-picked relevant BBR commits to fix rare random reboots

      r22
      Fixed a recent f2fs rapid GC commit that caused an indefinite wakelock
      5G support removed due to improper radio support
      Linux v4.14.138 merged
      Switched to GCC 9.2.0

      r21
      Merged some performance improvement patches from kdrag0n

      r20
      Random reboots due to improper TCP backports fixed (thanks to freak07)
      Random reboots due to f2fs rapid GC fixed (thanks to ab123321)
      Nightscape fixed
      Booting issues with OnePlus 7 non-Pro fixed
      Support for OnePlus 7 Pro 5G added

      Linux v4.14.137 merged
      LA.UM.7.1.r1-15800-sm8150.0 merged
      Wi-Fi drivers updated to 5.2.03.11J
      Latest OnePlus changes merged
      Latest f2fs-stable merged with correct encryption patch
      Properly disabled userspace lmkd
      Qualcomm RmNet extensions added
      Enabled power efficient workqueues
      Bunch of memory allocations from various subsystems were reworked to perform much better (thanks to Sultan)

      r1
      Initial release
      45
      r40 is up and it's a major update.

      I'm expecting this to be my last OxygenOS kernel in preparation for full-time AOSPA development. I won't be updating this OxygenOS kernel unless a critical issue pops up.

      7T and 7T Pro supports are added and due to TWRP not working properly there, you can use FK Kernel Manager for installation.
      EXKM is unsupported due to weird installation issues and it's not worth my time to fix.

      Note that neither of those device can use f2fs due to Dynamic Partitions. You'll have to do a heavy and risky repartitioning like I did for f2fs, which I don't have the time to write down a tutorial.

      r40
      OnePlus 7T and OnePlus 7T Pro support added
      Added support for flashing via FK Kernel Manager
      Major optimizations to touch panel drivers for lower overheads
      Merged a zswap patch for faster lookups - better memory swap performance
      Disabled unnecessary kernel log writeback debug feature
      Linux v4.14.156 merged
      Latest Qualcomm's Android 4.14 kernel merged
      (LA.UM.8.1.r1-12200-sm8150.0, LA.UM.8.11.r1-01800-NICOBAR.0, LA.UM.8.9.r1-06500-SM6xx.0)
      Wi-Fi drivers updated to 5.2.03.15T
      exFAT drivers added
      WireGuard updated to 20191127