[RADIO & FIRMWARE]HTC One Radio's | Firmware | Other Useful Files | Updated 6/6/14

[godfirst]

Been awhile since I've been around but anything new or have everyone moved on to the m8?[emoji41]

 

[dog77k]

Been awhile since I've been around but anything new or have everyone moved on to the m8?[emoji41]

Been wondering the same. 4T.28 is the latest I know of, and has been running well here.

 

[godfirst]

Been wondering the same. 4T.28 is the latest I know of, and has been running well here.

I take it, that already has its own thread[emoji41]

 

[bighleo114312]

Im curios if i can flash the att ota 4.4.2 modem on my m7 sprint, im bootloader unlocked and s-off. Supercid. My problem is that im using telcel here in mexico. And it only gets EDGE. But its funny cause my s4 srpint gets 4g lte. Or what can i do. Help guys okease. Thanks

Enviado desde mi HTCONE mediante Tapatalk

 

[dark2099]

Im curios if i can flash the att ota 4.4.2 modem on my m7 sprint, im bootloader unlocked and s-off. Supercid. My problem is that im using telcel here in mexico. And it only gets EDGE. But its funny cause my s4 srpint gets 4g lte. Or what can i do. Help guys okease. Thanks

Enviado desde mi HTCONE mediante Tapatalk

I doubt it would help since all these radio's are for gsm devices.

Sent from my HTC One_M8 using XDA Premium HD app

 

[majmoz]

Im curios if i can flash the att ota 4.4.2 modem on my m7 sprint, im bootloader unlocked and s-off. Supercid. My problem is that im using telcel here in mexico. And it only gets EDGE. But its funny cause my s4 srpint gets 4g lte. Or what can i do. Help guys okease. Thanks

Enviado desde mi HTCONE mediante Tapatalk

Unfortunely you are locked in by the Bands supported in your Sprint HTC One. TELCEL uses 1700 MHz for LTE; your phone uses 1900 MHz for LTE. The only band that both your phone and TELCEL have in common is GSM 850 for 3G. To answer your question, using a radio from AT&T will not help you the bands are built into the phone.

 

[ILikeBubbles]

i've been having some issues with reception (ie: full bars but can't send/receive texts) and i was going to flash an updated radio.. but which one should i flash? i'm running 4.4.4 on AT&T (cm11 - M11) and.. i THINK that this one -(4.4.2 ATT OTA/4.18.502.7) Radio_4T.24.3218.09_10.26.1718.01L- is the one i use but i'd rather get conformation.. i'm still pretty new to all of this and don't know what to look for. i did look online a bit to try to find 'which radio should i use' but that just led me here.. thank you for your help!!


Update: I just flashed 4T.28 and haven't seen any improvement.. I think it's the phone but does anyone else have any ideas? Thank you!

 

[Jooosty]

I'm running 4.4.4 stock on ATT and am using a baseband that starts with 4M.27.3218 Which was posted a few pages back.

I feel it is better than the one that you are using now which I was using before as well.

Sent from my HTC One using XDA Free mobile app

 

[bricktm7]

- flash in custom recovery -

Here's the 5.12.502.2 AT&T Radio from the OTA - Radio_4M.27.3218.14_10.37.1718.01L
http://www.androidfilehost.com/?fid=23501681358544319

Here's the Radio from 5.11.401.10 International firmware
http://www.androidfilehost.com/?fid=23501681358544315

Update: 6.06.401.1 - Radio_4T.28.3218.04_10.33E.1718.01L.zip
http://www.androidfilehost.com/?fid=23501681358550122

Will flashing this erase my data? And also will it work with my phone:


(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4281mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

HTC one m7
ARHD 82.0
TWRP 2.6.3.3

 

[majmoz]

Will flashing this erase my data? And also will it work with my phone:

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4281mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

HTC one m7
ARHD 82.0
TWRP 2.6.3.3

• Will flashing this erase my data? No, you will flash this in TWRP.
• And also will it work with my phone: Yes, they will work with your phone.

 

[ScreamZack]

Can I upgrade to the latest firmware and keep root access? If so, can you point me to the right file to download? Please and thank you.

 

[bilal91]

Hi everyone...i've the 4A.17.3250.14_10.39.1150.04L radio atm on the latest firmware and software...i live in england and currently on Three, was wondering if i anyone knows any good radios for that or if i should stick to my current one

 

[gokudre]

Hello.... Which one of these is the LATEST for t mobile USA
? Thx...
Sent from my HTC One using XDA Free mobile app

 

[mando1]

upgrade from 3.xx to 6.xx latest

Can any one tell me what I have to do to upgrade to 6.xx latest firmware if I'm on 3.xx att firmware?I have to jump from 3.xx to 6.xx if possible. And also if anything went wrong flashing the firmware can I go back to the custom recovery and restore the nandroid backup?


I'm on a HTC m7 ATT ,s-off,insertcoin 4.4.3

 

[miten_sheth]

Can any one tell me what I have to do to upgrade to 6.xx latest firmware if I'm on 3.xx att firmware?I have to jump from 3.xx to 6.xx if possible. And also if anything went wrong flashing the firmware can I go back to the custom recovery and restore the nandroid backup?


I'm on a HTC m7 ATT ,s-off,insertcoin 4.4.3

As far as I know.. It is advisable to go step by step rather than jumping directly from one firmware to the other..
I may be wrong.. Someone more knowledgeable please correct me if I am..

 

[kaijura]

Can any one tell me what I have to do to upgrade to 6.xx latest firmware if I'm on 3.xx att firmware?I have to jump from 3.xx to 6.xx if possible. And also if anything went wrong flashing the firmware can I go back to the custom recovery and restore the nandroid backup?


I'm on a HTC m7 ATT ,s-off,insertcoin 4.4.3

As far as I know.. It is advisable to go step by step rather than jumping directly from one firmware to the other..
I may be wrong.. Someone more knowledgeable please correct me if I am..

I was too lazy to go hunt through broken and expired downloads links so decided to try incremental updates:
flashed from
1.26.502.15 --> 3.17.502.3 --> 4.18.502.7 --> 5.12.502.2
on m7ul AT&T, confirmed that the device is now on the latest (5.12.502.2) and working fine.

 

[mando1]

I was too lazy to go hunt through broken and expired downloads links so decided to try incremental updates:
flashed from
1.26.502.15 --> 3.17.502.3 --> 4.18.502.7 --> 5.12.502.2
on m7ul AT&T, confirmed that the device is now on the latest (5.12.502.2) and working fine.

So what is incremental updates did you do it with RUU'S?

 

[kaijura]

So what is incremental updates did you do it with RUU'S?

This m7att is S-OFF, so any firmware version can be flashed on the spot. It's been recommended to flash firmwares in the order that you would receive an OTA as if you were on Stock S-ON.
With S-OFF you can skip past (some of) this, as my earlier post experience shows. Some of the firmwares have expired links, so I took the chance to skip past a few and it works without much issue. You may have to reflash recoveries and/or factory reset if the ROM acts funny.

 

[brianhill1980]

Hey guys, I have a question about my device. I'm thinking it needs a firmware and radio update, but I'm not sure. When I'm on the Fastboot screen this is what I see.

M7_UL PVT SHIP S-OFF RH
CID-GOOGL001
HBOOT-1.57.0000
RADIO-4T.29.3218.08
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Jul 28 2014, 18:52:08.0

Looking at the available Radio images to download from this thread, it looks like I'm using a newer version. But I'm not sure about my firmware. Is that the HBOOT? If so, 1.57.0000 looks to be quite outdated.

How would I go about bringing my device up to date, which files should I flash?

BTW, the CID says GOOGL001 because that's what I set it to when I tried out GE on the phone. It used to be ROGER001. I'm on Rogers Wireless in Canada.

Thanks in advance for any help!

 

[Shadow.Mage]

Hi guys, I'm looking everywhere for the latest GPe Lollipop radio to make them a flashable zip. Does anybody has it by any chance?