[RADIO & FIRMWARE]HTC One Radio's | Firmware | Other Useful Files | Updated 6/6/14

[xpurtwitness]

Ok folks, I'm here to bring you the 5.1 radio from the latest GPE update. I snagged it from another thread and set it up as a flashable zip. Keep in mind that radios are essentially drivers for your modem so they are platform agnostic.
Radio Lollipop 5.1 (4T.36.3218.06_10.33R.1718.01L) HTC One M7 Flashable ZIP

If you hate my radio choice, feel free to replace the radio.img with your own radio.img file and then you have your very own custom flashable radio! Now spread joy upon the land with your new radio flashing / creating abilities!

Thanks santod040 for the original radio! (Note you can dump your current modem with either ADB or Fastboot, can't remember which one off the top of my head... perhaps both work!).
http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927

Can you confirm that this works with AT&T LTE? I'm not getting LTE after flashing this radio. I have the latest Sense firmware with 5.1 GPE stock ROM, but I'm now seeing my signal teeter between H/3G in an area where I historically had LTE.

 

[cincon]

can i flash any radio to Verizon Htc? because i want to open new Mhz like band 20,but verizon supports LTE: 700/1700/1800/2600 MHz (Band 3, 4, 7, 13) , can i active band 20 with customer Radio?

 

[panxe]

On CM 12.1 latest nightly with Baseband - 4t.27.3218.14_10.33c.1718.01d, Need new firmware. Where to get it from, also S-ON. Can I do it? Dont want to spend 25 $

 

[makgun]

Hi, I am new on this thread because my sister uses m7(ul) so I did some researches and tried most of them without succes. My problem is that the phone mobile signal is weak(if signal is full there is no problem but if the signal is weak or below 2 bar indicator it doesn't connect to mobile data or talking is with noises or lost voice.) according to others phone have. I think this happen because of radio.img(named baseband on my phone, I think). So I tried to find correct firmware but I think I couldn't or it doesn't related to radio.img.
My phone information is that: PN07140 (801s) Serial no:HT36FW****** (6 digits intentionally hidden ) . My rom is ViperOne 9.0.0(android 5.0.2). Now baseband is 4A.19.3263.29_10.38j.1157.04L .
I hope there is someone who can help me to find out correct firmware.

 

[AbstractMind87]

Is there another thread that has links?

 

[hunting_]

Guys plz anyone help me i flash AICP custom rom got unknown baseband no ime Radio 1.01.20.0904_2


Sent from my HTC One M7 using XDA-Developers Legacy app

 

[diosgas]

Links DOWN!

Hi, Good Work friend but the links from Radio are Down

 

[Speedy Danny]

Radio/Baseband's are to be flashed in custom recovery! I will try to stay up to date on all radios! Compatible with all HTC Ones. Make sure to have a backup of your current radio before flashing. Each radio will give different results for different users based on location, network, reception, etc. Feel free to try the one's that suits you!:highfive: Firmware Packages will be official & leak ATT, Dev, & Google Edition (since some ATT users purchased the Dev & GE Editions)! :good:

(1.29.401.12 WWE OTA) Radio_4A.14.3250.13_10.33.1150.01L ---> http://devhost.xda-developers.com/xCz

(T-Mobile US) Radio_4A.14.3250.15_10.34.1150.02L ---> http://devhost.xda-developers.com/CWV

(2.17/2.19 Release) Radio_4A.16.3250.24_10.38.1150.03L ---> http://devhost.xda-developers.com/LBl

(2.24) Radio_4A.17.3250.14_10.39.1150.04L ----> http://devhost.xda-developers.com/lnm

(T-Mobile) Radio_4A.17.3250.20_10.440.1150.04L ------> http://devhost.xda-developers.com/2P0

(ATT 4.2.2 OTA) ATT_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04L ---> http://devhost.xda-developers.com/m71

(4.3 GE Radio) Radio_4A.18.3263.15_10.38h.1157.04L ----> http://devhost.xda-developers.com/rla

(4.3/3.17.401.2 Leak) Radio_4T.20.3218.03_10.10.1718.01L ---> http://devhost.xda-developers.com/YGa

(4.3/3.18.709.2 Taiwan ota) Radio_4A.19.3263.29_10.38j.1157.04L ---> http://devhost.xda-developers.com/6es

(4.3/3.22.1540.1/Developer Edition OTA) Radio_4A.20.3263.16_10.38k.1157.04L/P ---> http://devhost.xda-developers.com/UKy

(ATT 4.3 OTA) Radio 4T.20.3218.13_10.12.1718.01L ---> http://devhost.xda-developers.com/jRJ

(ATT 4.3 RUU) Radio_4A.19.3263.13_10.38j.1157.04L ---> http://devhost.xda-developers.com/T9w

(WWE 4.3/3.57.401.500) Radio_4A.20.3263.30_10.38l.1157.04 ---> http://devhost.xda-developers.com/X4b

(T-MOBILE USA 4.3/3.24.531.3) Radio_4A.21.3263.03_10.38m.1157.04L ---> http://devhost.xda-developers.com/Ekv

(WWE 3.62.401.1/4.3) Radio_4A.21.3263.04_10.38m.1157.04L ---> http://devhost.xda-developers.com/NAg

(4.4 GE Radio) Radio_4T.21.3218.21_10.16.1718.01L ---> http://devhost.xda-developers.com/Jis

(4.4 Developer Edition OTA) Radio_4A.22.3263.14_10.38n.1157.04L ---> http://devhost.xda-developers.com/imB

(4.4.2/WWE 4.19.401.8) Radio_4A.23.3263.28_10.38r.1157.04L ---> http://devhost.xda-developers.com/g6I

(4.4.2 T-Mobile OTA/4.19.531.10) Radio_4.24.3263.09_10.38r.1157.04L ---> http://devhost.xda-developers.com/2Kd

(4.4.2 ATT OTA/4.18.502.7) Radio_4T.24.3218.09_10.26.1718.01L ---> http://devhost.xda-developers.com/xju

(4.4.2 WWE OTA/4.19.401.11) Radio_4A.25.3263.21_10.38x.1157.04L ---> http://devhost.xda-developers.com/7ci

Please READ The F.A.Q Before Continuing!​

Credit to @vomer & @mike1986. for the Firmware FAQ!:good:

FIRMWARE FAQ:

Q: Do I need S-OFF for firmware flashing?

A: YES!

Q: Do I NEED to update my firmware?

A: NO! But doing so ensures optimal phone performance.

Q: Does it matter when I flash the firmware (before or after new ROM install)

A: NO!

Q: Will updating the firmware erase my SD card or Apps?

A: NO! The firmware files provided in this thread will not erase SD card or Apps.

Q: If I only flash a ROM, will I get updated to the latest firmware?

A: NO!

Q: Can I install a U edition firmware on a UL edition phone?

A: YES, but you might loose the ability to connect to LTE or have some other incompatibilities.


Q: What is firmware.zip?

A: Firmware.zip is a part of each OTA update from HTC. It contains important part of the firmware like radio, bootloader, recovery, kernel etc..

Q: Why it's important to flash firmware.zip and when should I flash it?

A: It is recommended to have flashed latest firmware on your device for best modem performance and system stability. Sometimes it's necessary to have latest bootloader flashed because otherwise your device might not work well with new system update.

Q: Can I flash this firmware.zip on any HTC One?

A: Not if your device is S-ON. To be able to flash it on S-ON device, your modelid (example: PN0710000) and cidnum (example: HTC__001) must match the firmware.zip version you are about to flash.

Q: If my modelid or cidnum doesn't match, can I brick my device if I try to flash firmware.zip anyway?

A: As long as your device is S-ON flashing firmware.zip with non matching modelid or cidnum will result in error and nothing will be flashed, so there is no risk of brick.

Q: Do I need to have locked, unlocked or relocked bootloader to be able to flash firmware.zip?

A: Bootloader will not need to be relocked if flashing any custom firmware from this thread.

Q: If I can't flash newest firmware.zip because of wrong modeid (MID) or cidnum (CID) does it mean I can't use custom ROM based on the latest HTC update?

A: In most cases you should be able to run any custom ROM as long as hboot update is not mandatory.

ATT 4.2.2 OTA 1.26.502.15 Firmware (HBOOT, Recovery, & Boot.img are removed) ---> http://devhost.xda-developers.com/phU

ATT 4.3 Leak 3.10.502.2 Firmware (Boot.img removed) ---> http://devhost.xda-developers.com/euh

DEVELOPER EDITION 4.3 OTA 3.22.1540.1 Firmware (Boot.img & Recovery.img removed) ---> http://devhost.xda-developers.com/AQZ

(Credit to @vomer) GOOGLE EDITION 4.3 OTA 3.06.1700.1 Firmware (Boot.img & Recovery.img removed) ---> http://devhost.xda-developers.com/Wem

JWR66Y.H1/3.07.1700.1 GOOGLE EDITION OTA Firmware (Only includes New Hboot/was a small security update) ---> http://devhost.xda-developers.com/KPz

(Credit to @cschmitt for providing the decrypted RUU) ATT 4.3 OTA 3.17.502.3 Firmware/From RUU (Boot.img & Recovery.img removed) ---> http://devhost.xda-developers.com/fqg

(Credit to @dark2099 for providing the OTApkg.zip) ATT 4.3 Official OTA 3.17.502.3 Firmware/Not From The RUU (Boot.img & Recovery.img removed) ---> http://devhost.xda-developers.com/YDI

4.4 KITKAT/3.58.1700.5 GOOGLE EDITION Custom Firmware (Stock Boot.img & Stock Recovery removed) ---> http://devhost.xda-developers.com/WQG

4.4 KITKAT DEVELOPER EDITION OTA 4.06.1540.2 Custom Firmware (Stock Boot.img & Stock Recovery.img removed) ---> http://devhost.xda-developers.com/J63

(latest) 4.4.2/KOT49H/3.62.1700.1 GOOGLE EDITION Custom Firmware (Stock Boot.img & Stock Recovery removed) ---> http://devhost.xda-developers.com/idi

(latest) 4.4 KITKAT DEVELOPER EDITION OTA 4.06.1540.3 Custom Firmware (Stock Boot.img & Stock Recovery removed) ---> http://devhost.xda-developers.com/Ze1

(latest) ATT 4.4.2 OTA/4.18.502.7 Custom Firmware (Stock Boot.img and Stock Recovery removed) ---> http://devhost.xda-developers.com/a1w

Quick How To Flash Firmware:

First you will need to copy downloaded firmware to fastboot.exe location (it must be located in the same folder as your fastboot). Example; c:/SDK/platform-tools/fastboot.exe

Next you will need to re-name the downloaded file to firmware.zip and not firmware.zip.zip

Open CMD (command prompt) where you have adb.exe & fastboot.exe located (simply hold down the Shift key and right-click the folder that contains both of these. The context menu will contain an entry, "Open command window here.”).

Connect device to PC.

Type:

adb shell

Either boot your device in fastboot/bootloader mode by holding volume down + power button or type:

adb reboot bootloader

If your curious as to what your cid, mid, firmware #, s-off/on, etc. type:

fastboot getvar all

Then you will need to type:

fastboot oem rebootRUU

and wait for device to reboot.

Type:

fastboot flash zip firmware.zip

and wait for process to complete.

Sometimes that command needs to be done twice because it will fail after the first couple of lines it will tell you something like if you want to flush immediately enter code again

fastboot flash zip firmware.zip

wait for process to complete and say successful.

Last type:

fastboot reboot

Recovery:

I recommend TWRP which can be found here: http://goo.im/devs/OpenRecovery/m7/

Brief Instructions:

Using ADB:

adb shell

adb reboot bootloader)

Next (once phone is booted into boot loader:

fastboot erase cache

fastboot flash recovery recovery.img(this would be what every name you have for your recover)

Finally (once it was successful):

fastboot reboot

Recovery link doesnt work....