• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Razer Phone 2 Bricked Help?

Search This thread

FellpeSoares

Member
Sep 13, 2016
20
4
Brazil
Can someone help me with full image backup of partitions eMMC?
I can try unbrick my rp2 with full backup mmcblk0 on sd card due my phone don't enter in fastboot anymore, only i see Qualcomm HS-USB QDLoader 9008 when connecting usb


I also tried buying unbrick files from this site
https://www.aryk.store/2019/07/razer-phone-2-unbrick-files.html
but they are scammers!! they only sent me an empty folder on google drive

------Update-------
(Razer Phone 2 don't have mmcblk0)

Now i have other Razer Phone 2, i have full backup now of partitions sda, sdb, sdc, sde, sdf...
but i have new problem, how i merge theses partitions "cutted" to my flashdrive?

theses partitions have same header looking in hex viewer comparing with gpt_both files
gpt_both0.bin -> sda
gpt_both1.bin -> sdb
gpt_both2.bin -> sdc
gpt_both3.bin -> sdd
gpt_both4.bin -> sde
gpt_both5.bin -> sdf

vhmu4Lh.jpg



Also i used EDL Generator to create xml files if someone have prog_firehore
looking systeminfo_a or _b in txt, you see name of firehose used i think
RCL-0-VV-prog_ufs_firehose_8998_ddr.elf, RCL-0-0016-prog_ufs_firehose_8998_ddr.elf
 

Attachments

  • rp2partitions.zip
    43.1 KB · Views: 47
Last edited:

Jordan5900

Member
Jan 10, 2020
7
1
Guelph
Google Pixel 3
bootloader is unlocked but don't boot more, only show Qualcomm HS-USB QDLoader 9008 when connect usb on PC

Okay yeah I've been here before,
Follow this post

https://forum.xda-developers.com/android/development/guide-fixing-hard-bricks-t3403868/amp/

Before you try doing everything try just getting the drivers and using CMD to boot into bootloader or try system, once it's in bootloader, if all your files are gone, get ur factory ROM and reflash EVERYTHING MANUALLY. Like to into the flash all.bat and do every flash command it shows in that order - I had the trouble that the phone doesn't keep android-info.txt on it so reflashing everything manually will bypass using the flash all.bat and it failing.
 

FellpeSoares

Member
Sep 13, 2016
20
4
Brazil
Okay yeah I've been here before,
Follow this post

https://forum.xda-developers.com/android/development/guide-fixing-hard-bricks-t3403868/amp/

Before you try doing everything try just getting the drivers and using CMD to boot into bootloader or try system, once it's in bootloader, if all your files are gone, get ur factory ROM and reflash EVERYTHING MANUALLY. Like to into the flash all.bat and do every flash command it shows in that order - I had the trouble that the phone doesn't keep android-info.txt on it so reflashing everything manually will bypass using the flash all.bat and it failing.

thanks for helping, but this don't work because razer phone 2 don't use TOT files, these files are for LG
 

Cremosidad

New member
Aug 11, 2021
4
0
¿Alguien puede ayudarme con la copia de seguridad de imagen completa de las particiones eMMC?
Puedo intentar desbloquear mi rp2 con copia de seguridad completa mmcblk0 en la tarjeta sd debido a que mi teléfono ya no ingresa en fastboot, solo veo Qualcomm HS-USB QDLoader 9008 al conectar el usb


También intenté comprar archivos sin ladrillos de este sitio.
https://www.aryk.store/2019/07/razer-phone-2-unbrick-files.html
pero son estafadores !! solo me enviaron una carpeta vacía en google drive

------Actualizar-------
(Razer Phone 2 no tiene mmcblk0)

Ahora tengo otro Razer Phone 2, ahora tengo una copia de seguridad completa de las particiones sda, sdb, sdc, sde, sdf ...
pero tengo un nuevo problema, ¿cómo fusiono estas particiones "cortadas" en mi unidad flash?

Estas particiones tienen el mismo encabezado que se ve en el visor hexadecimal en comparación con los archivos gpt_both
gpt_both0.bin -> sda
gpt_both1.bin -> sdb
gpt_both2.bin -> sdc
gpt_both3.bin -> sdd
gpt_both4.bin -> sde
gpt_both5.bin -> sdf

vhmu4Lh.jpg



También utilicé EDL Generator para crear archivos xml si alguien tiene prog_firehore
mirando systeminfo_a o _b en txt, ves el nombre de la manguera de incendios utilizada, creo
RCL-0-VV-prog_ufs_firehose_8998_ddr.elf, RCL-0-0016-prog_ufs_firehose_8998_ddr.elf
¿Podría resolverse el problema? Tengo un error algo similar