So people this thread is basically related to all the JB Stuff (like, rooting, development, recoveries etc.) for the razr XT910/XT912.
Soon I will release a video on how to install roms using safestrap and how to use the rom slots for various roms (i.e. quad boot).
In the mean time, this thread will link you to the rom threads directly which are available in the dev section, I will paste the links to the rom thread, because if a dev updates his rom, you guys can download the latest one without a problem.
But first up i will Paste All the Important Links.
XT910
1.Fastboot Files
2. JB Root
3. Motorola Drivers
4. RSD Lite Guide
5. Fastboots
6. Safestrap And BMM
7. Switching Between Recoveries (i.e, SS and BMM)
XT912
Here is the ultimate tool by Matt for your help, the tool has everything.
ROMS For XT910/XT912.
ARTMOD V3.1 ST
CM10.1
Buttered AOKP
PACman
Carbon Rom
Bionx Catalyst
Avatar (GSM), Avatar (CDMA)
Dirty Unicorns
Rage Rom
Stock AOKP
Liquid Smooth
Blue Android
D-WiZ JBX
Now as far as I have seen, most of the roms require same installation steps (Basic installation of a rom, may not be the same for all roms)
1. Reboot into recovery.
2. Select your slot/ activate system.
3. Wipe Cache, Data, Factory Reset and System.
4. Flash the Rom (with gapps/gsm patch, extra zip; depending upon the rom procedure).
5. Reboot and Enjoy.
Safestrap Users Note:-
Now we have some roms which have very specific requirement like, PACman has to be installed on slot2, cm10.1 on slot1, Liquid smooth on slot3, etc etc.
Beaware of this fact, as after a flashing the rom in the wrong slot, they will not boot, So its advised to read the instructions given on each rom page.
Bmm Users Note:-
Now we have some roms which have very specific requirement like, flashing on system 1 or 2. I dont use the BMM much, so I cant , but other BMM users can share their experience with me, and i will update the thread accordingly.
Beaware of this fact, as after a flashing the rom in the wrong system, they will not boot, So its advised to read the instructions given on each rom page.
For BMM tutorials Click Here
Important Note:-
Most of the roms are based on European JB base, so some users may have to flash the EU JB kernel in order to boot the rom, most of the roms have an attachment of the kernel (if needed with the rom), and users have to flash the kernel before flashing the rom accordingly, otherwise rom wont boot up.
The video will be based on SS recovery, because I use that and will be out soon.
Remember; now people can contact me to me on fb as well, my fb page is in my signature and to sow your support you even like the page.
Cheers to All Once Again :angel:
Soon I will release a video on how to install roms using safestrap and how to use the rom slots for various roms (i.e. quad boot).
In the mean time, this thread will link you to the rom threads directly which are available in the dev section, I will paste the links to the rom thread, because if a dev updates his rom, you guys can download the latest one without a problem.
But first up i will Paste All the Important Links.
XT910
1.Fastboot Files
2. JB Root
3. Motorola Drivers
4. RSD Lite Guide
5. Fastboots
6. Safestrap And BMM
7. Switching Between Recoveries (i.e, SS and BMM)
XT912
Here is the ultimate tool by Matt for your help, the tool has everything.
ROMS For XT910/XT912.
ARTMOD V3.1 ST
CM10.1
Buttered AOKP
PACman
Carbon Rom
Bionx Catalyst
Avatar (GSM), Avatar (CDMA)
Dirty Unicorns
Rage Rom
Stock AOKP
Liquid Smooth
Blue Android
D-WiZ JBX
Now as far as I have seen, most of the roms require same installation steps (Basic installation of a rom, may not be the same for all roms)
1. Reboot into recovery.
2. Select your slot/ activate system.
3. Wipe Cache, Data, Factory Reset and System.
4. Flash the Rom (with gapps/gsm patch, extra zip; depending upon the rom procedure).
5. Reboot and Enjoy.
Safestrap Users Note:-
Now we have some roms which have very specific requirement like, PACman has to be installed on slot2, cm10.1 on slot1, Liquid smooth on slot3, etc etc.
Beaware of this fact, as after a flashing the rom in the wrong slot, they will not boot, So its advised to read the instructions given on each rom page.
Bmm Users Note:-
Now we have some roms which have very specific requirement like, flashing on system 1 or 2. I dont use the BMM much, so I cant , but other BMM users can share their experience with me, and i will update the thread accordingly.
Beaware of this fact, as after a flashing the rom in the wrong system, they will not boot, So its advised to read the instructions given on each rom page.
For BMM tutorials Click Here
Important Note:-
Most of the roms are based on European JB base, so some users may have to flash the EU JB kernel in order to boot the rom, most of the roms have an attachment of the kernel (if needed with the rom), and users have to flash the kernel before flashing the rom accordingly, otherwise rom wont boot up.
The video will be based on SS recovery, because I use that and will be out soon.
Remember; now people can contact me to me on fb as well, my fb page is in my signature and to sow your support you even like the page.
Cheers to All Once Again :angel:
Last edited:
