[Read OP First] Official ViPER4Android Audio Profiles

kingofnice

Senior Member
Jun 2, 2012
1,172
925
0
If you want to share at another forum, PM me to request maintainer permission.​
V4Arena Facebook Chat Room(Please join!): www.facebook.com/groups/v4a.en
Original ViPER520 Post: https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/543409_545378615533820_1857812272_n.png/

OP Index:
1. Information
2. Personal Profiles
3. Setting a Profile


Purpose: Have you found an amazing profile setup for music and want to share? This is the Place!

Notice: For those who think uploading the profile file will be easier. Your right, it would be easier. Most likely though, using this file from device to device will not function properly. Therefore, just share the way asked.

To share simply make a post in this format:

If a feature is not being used go ahead and leave it out.

FX:

1. MASTER POWER:
(ii) Force Enable V4A
2. PLAYBACK CONTROL GAIN:
(ii) Select Effect Strength:
(iii) Max Gain:
(iv) Max Output:
3. VIPER-DDC:
(ii) Listening Device:
4. SPECTRUM EXTENSION:
(ii) Strength:
5. FIREQUALIZER:
(ii) Select Preset:
6. CONVOLVER:
(ii) Impulse Response:
(iii) Cross Chanel
7. FIELD SURROUND:
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
8. DIFFERENTIAL SURROUND:
(i) Select Delay Time:
9. HEADPHONE SURROUND +:
(i) Select Effect Quality:
10. REVERBERATION:
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
11. DYNAMIC SYSTEM:
(i) Select Listening Device:
(ii) Select Dynamic Bass:
12. TUBE SIMULATOR (6N1J):
13. FIDELITY CONTROL:

(i) Enable ViPER Bass:
Select Bass Mode:
Select Bass Frequency:
Select Bass Boost:
(ii) Enable ViPER Clarity:
Select Clarity Mode:
Select Clarity:
14. AUDITORY SYSTEM PROTECTION:
(ii) Select Binaural Level:
15. MASTER GATE (Limiter):
(i) Output Gain:
(ii) Channel Pan:
(iii) Limit Threshold:
See Personal Profiles below for a hint of what to do!


Download V4A FX & XHiFi
Note: This product is completely free, of course, you can donate to ViPER520(creator) or zhuhang.
Make sure you are connected to internet when installing V4A. So we can calculate number of installations. Thanks.
Refer to the Official Thread HERE to install and troubleshoot.
 
Last edited:

kingofnice

Senior Member
Jun 2, 2012
1,172
925
0
Personal Profiles // Carnage Profiles

Personal Profiles
Here are some awesome Profiles from zhuhang and I!

My Profile:
Carnage 4.1

For a clearly amazing experience with your music!
Code Name: Twinkle


Made with ATH-M50 // M50x
FX:

1. MASTER POWER: ✔
(ii) Force Enable V4A:
2. PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength: Slight
(iii) Max Gain: 4x
(iv) Max Output: 0 dB
3. VIPER-DDC:
(ii) Listening Device:
4. SPECTRUM EXTENSION:
(ii) Strength:
5. FIREQUALIZER: ✔
(ii) Select Preset: Custom
Custom Equalixer FX:
+3.1, +2.5, +1.5, +0.8, +1.3, +2.0, +1.6, +1.1, +2.2, +2.8
6. CONVOLVER:
(ii) Impulse Response:
(iii) Cross Chanel:
7. FIELD SURROUND:
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
8. DIFFERENTIAL SURROUND:
(i) Select Delay Time:
9. HEADPHONE SURROUND +:
(i) Select Effect Quality:
10. REVERBERATION:
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
11. DYNAMIC SYSTEM: ✔
(i) Select Listening Device: Extreme Headphone (v2)
(ii) Select Dynamic Bass: 9 Percent
12. TUBE SIMULATOR (6N1J):
13. FIDELITY CONTROL:
✔
(i) Enable ViPER Bass:✔
Select Bass Mode: Natural
Select Bass Frequency: 80 Hz
Select Bass Boost: 8.0 dB
(ii) Enable ViPER Clarity:✔
Select Clarity Mode: Natural
Select Clarity: 6.0 dB
14. AUDITORY SYSTEM PROTECTION:
(ii) Select Binaural Level:
15. MASTER GATE (Limiter): ✔
(i) Output Gain: -6.0 dB
(ii) Channel Pan: 0.5 : 0.5
(iii) Limit Threshold: 0 dB
Made with JVC HA-FX30 (The Original Carnage Profile)
FX:

1. MASTER POWER: ✔
(ii) Force Enable V4A:
2. PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength: Moderate
(iii) Max Gain: 2x
(iv) Max Output: 0 dB
3. VIPER-DDC:
(ii) Listening Device:
4. SPECTRUM EXTENSION:
(ii) Strength:
5. FIREQUALIZER: ✔
(ii) Select Preset: Custom
Custom Equalixer FX:
+3.0, +1.5, +1.0, +1.6, +1.4, +2.1, +2.9, +2.3, +3.8, +2.5
6. CONVOLVER:
(ii) Impulse Response:
(iii) Cross Chanel:
7. FIELD SURROUND:
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
8. DIFFERENTIAL SURROUND:
(i) Select Delay Time:
9. HEADPHONE SURROUND +:
(i) Select Effect Quality:
10. REVERBERATION:
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
11. DYNAMIC SYSTEM: ✔
(i) Select Listening Device: Common Earphone (v2)
(ii) Select Dynamic Bass: 14 Percent
12. TUBE SIMULATOR (6N1J):
13. FIDELITY CONTROL:
✔
(i) Enable ViPER Bass:✔
Select Bass Mode: Natural
Select Bass Frequency: 66 Hz
Select Bass Boost: 3.5 dB
(ii) Enable ViPER Clarity:✔
Select Clarity Mode: Natural
Select Clarity: 6.0 dB
14. AUDITORY SYSTEM PROTECTION:
(ii) Select Binaural Level:
15. MASTER GATE (Limiter): ✔
(i) Output Gain: 0 dB
(ii) Channel Pan: 0.5 : 0.5
(iii) Limit Threshold: 0 dB
Made with JVC HA-FR37
FX:

1. MASTER POWER: ✔
(ii) Force Enable V4A:
2. PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength: Slight
(iii) Max Gain: 3x
(iv) Max Output: -1.0 dB
3. VIPER-DDC:
(ii) Listening Device:
4. SPECTRUM EXTENSION:
(ii) Strength:
5. FIREQUALIZER: ✔
(ii) Select Preset: Custom
Custom Equalixer FX:
+3.0, +1.9, +1.3, +1.6, +1.4, +2.2, +1.7, +0.7, +1.4, +0.8
6. CONVOLVER:
(ii) Impulse Response:
(iii) Cross Chanel:
7. FIELD SURROUND:
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
8. DIFFERENTIAL SURROUND:
(i) Select Delay Time:
9. HEADPHONE SURROUND +:
(i) Select Effect Quality:
10. REVERBERATION:
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
11. DYNAMIC SYSTEM: ✔
(i) Select Listening Device: Common Earphone (v2)
(ii) Select Dynamic Bass: 1 Percent
12. TUBE SIMULATOR (6N1J):
13. FIDELITY CONTROL:
✔
(i) Enable ViPER Bass:✔
Select Bass Mode: Natural
Select Bass Frequency: 66 Hz
Select Bass Boost: 8.0 dB
(ii) Enable ViPER Clarity:✔
Select Clarity Mode: Natural
Select Clarity: 6.0 dB
14. AUDITORY SYSTEM PROTECTION: ✔
(ii) Select Binaural Level: Slight
15. MASTER GATE (Limiter): ✔
(i) Output Gain: -3.0 dB
(ii) Channel Pan: 0.5 : 0.5
(iii) Limit Threshold: 0 dB
Made with Logitech S715i
FX:

1. MASTER POWER: ✔
(ii) Force Enable V4A:
2. PLAYBACK CONTROL GAIN:
(ii) Select Effect Strength:
(iii) Max Gain:
(iv) Max Output: 0 dB
3. VIPER-DDC:
(ii) Listening Device:
4. SPECTRUM EXTENSION:
(ii) Strength:
5. FIREQUALIZER:
(ii) Select Preset: Custom
Custom Equalixer FX:
+1.9, +1.6, +2.1, +3.0, +3.2, +4.3, +3.9, +4.6, +5.0, +3.7
6. CONVOLVER:
(ii) Impulse Response:
(iii) Cross Chanel:
7. FIELD SURROUND:
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
8. DIFFERENTIAL SURROUND:
(i) Select Delay Time:
9. HEADPHONE SURROUND +:
(i) Select Effect Quality:
10. REVERBERATION:
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
11. DYNAMIC SYSTEM:
(i) Select Listening Device:
(ii) Select Dynamic Bass:
12. TUBE SIMULATOR (6N1J):
13. FIDELITY CONTROL:
✔
(i) Enable ViPER Bass:✔
Select Bass Mode: Natural
Select Bass Frequency: 66 Hz
Select Bass Boost: 6.0 dB
(ii) Enable ViPER Clarity:✔
Select Clarity Mode: Natural
Select Clarity: 8.0 dB
14. AUDITORY SYSTEM PROTECTION:
(ii) Select Binaural Level:
15. MASTER GATE (Limiter): ✔
(i) Output Gain: 0 dB
(ii) Channel Pan: 0.5 : 0.5
(iii) Limit Threshold: -1.9 dB



Please Note: The Profiles below this are for Reference.

zhuhang's Profiles
Extreeme Clarity Profile (V4A FX & XHiFi Co-exists) - Headset Only

FX:

1. Master Power: ✔
2. Playback Gain Control: ✔
(ii) Select Effect Strength: Slight //Moderate
(iii) Max Gain: 4x //8x
(iv) Max Output: -1.9dB
3. FIR Equalizer: ✔
(ii) Select Preset: Acoustic*
4. Convolver: ✔
(ii) Impulse Response: Sony Xperia Clear Audio+ Try: SPL GoldMike Impulse w Flair//DBX//JoeMeek *PopEQ
5. Field Surround: ✘
6. Reverberation: ✘
7. Dynamic System: ✘
(iv) Tube Simulator(6N1J): ✘
8. Auditory System Protection (Cure Tech+): ✔
(ii) Select Binaural Level: Moderate

XHIFI:
1. Master Power: ✔
2. Playback Gain Control: ✘
3. FIR Equalizer: ✔
(ii) Select Preset: Vocal Boost**
4. Audio Reconstruction: ✔
(ii) Hi Clarity: 100**
(iii) Lo Contour: 70*
* Adjust to your desired bass level
** Adjust to your desired vocal level
ExplOOit Bass Profile (V4A FX & XHiFi Co-exists) - Headset Only

FX:

1. Master Power: ✔
2. Playback Gain Control: ✔
(ii) Select Effect Strength: Slight //Moderate
(iii) Max Gain: 4x //8x
(iv) Max Output: -1.9dB
3. FIR Equalizer: ✔
(ii) Select Preset: Acoustic*
4. Convolver: ✔
(ii) Impulse Response: Sony Xperia Clearbass Try: PopEQ
5. Field Surround: ✘
6. Reverberation: ✘
7. Dynamic System: ✔
(ii) Select Listening Device: Common Earphone(v2)*
(iii) Select Dynamic Bass: 100 Percent*
(iv) Tube Simulator(6N1J): ✘
8. Auditory System Protection (Cure Tech+): ✔
(ii) Select Binaural Level: Slight

XHIFI:
1. Master Power: ✔
2. Playback Gain Control: ✘
3. FIR Equalizer: ✔
(ii) Select Preset: Bass Boost**
4. Audio Reconstruction: ✔
(ii) Hi Clarity: 80**
(iii) Lo Contour: 100*
* Adjust to your desired bass level
** Adjust to your desired vocal level


Others will not be added if requested! Just post to share. Enjoy the Profiles!​
 
Last edited:

mamba720027

Senior Member
Sep 24, 2010
1,825
2,884
0
So heres my preset for anyone with the USA version of galaxy s4 and wanna try these on the factory headset it came with. I also tried it with my sony stereo headphone MDRX-XB700 which is a nice high end headset I use for desktop and the sound was awesome. Not sure how it would sound on other devices and the various headsets but anyone feel free to try.
I have used winamp music player with player equalizer turned off,no other sound effects active.

I tweak the sound towards a balance of clarity and bass without too much of the annoying loud vocal on high volume levels while keeping a polish bass and keeping all the music sound elements. More of a general preset.

Anything that is not in the list below is disabled.
Viper4Android FX / Headset

Master Power : Enable

Playback Gain Control : Enable
Effect Strength : Moderate
Max Gain : 2X
MAX Output : 0db

FIREqualizer
Preset : Custom
-2.5 -2.5 -3.0 -3.4 -3.7 -4.2 -6.9 -7.8 -7.6 -2.8
Convolver : Enable
Impulse Response : Tube Cassette II Chrome

Field Surround : Enable
Field surround Strength : Extreme
Mid Image Strength : Moderate

Headphone Surround+ : Enable
Effect Quality : High

Dynamic System : Enable
Listening Device : Common Earphone V2
Dynamic Bass : 6%

Auditory System Protection : Enable
Binaural Level : Moderate

Master Gate Limiter
Output Gain : 0 db
Limit Threshold : -3.0 db



Sent from my SGH-M919
 

Attachments

Last edited:

zhuhang

Recognized Contributor
Apr 3, 2011
4,133
14,571
263
Petaling Jaya
www.facebook.com
uPDATED Extreeme Clarity Profile (V4A FX & XHiFi Co-exists)
FX:
<Headset>
1. Master Power: ✔
2. Playback Gain Control: ✘
3. FIR Equalizer: ✘
4. Convolver: ✔
(ii) Impulse Response: Sony Xperia Rev2 ClearAudio+
5. Field Surround: ✘
6. Reverberation: ✘
7. Dynamic System: ✘
(iv) Tube Simulator(6N1J): ✘

8. Auditory System Protection (Cure Tech+): ✔
(ii) Select Binaural Level: Moderate

XHIFI:
1. Master Power: ✔
2. Playback Gain Control: ✘
3. FIR Equalizer: ✘

4. Audio Reconstruction: ✔
(ii) Hi Clarity: 50
(iii) Lo Contour: 25
 

Tinchoska

Senior Member
Jul 19, 2011
3,483
1,069
0
Hudson, Buenos Aires
uPDATED Extreeme Clarity Profile (V4A FX & XHiFi Co-exists)
FX:
<Headset>
1. Master Power: ✔
2. Playback Gain Control: ✘
3. FIR Equalizer: ✘
4. Convolver: ✔
(ii) Impulse Response: Sony Xperia Rev2 ClearAudio+
5. Field Surround: ✘
6. Reverberation: ✘
7. Dynamic System: ✘
(iv) Tube Simulator(6N1J): ✘

8. Auditory System Protection (Cure Tech+): ✔
(ii) Select Binaural Level: Moderate

XHIFI:
1. Master Power: ✔
2. Playback Gain Control: ✘
3. FIR Equalizer: ✘

4. Audio Reconstruction: ✔
(ii) Hi Clarity: 50
(iii) Lo Contour: 25
In ear headphones or like monster beats audio?

Enviado desde mi XT925 usando Tapatalk 4 Beta
 

heatledger

Senior Member
Jul 20, 2010
307
34
0
Is it possible for you to upload the file profile.pfr so we can simply add to folder viper4android/profile and than load from the app?
Because it is really hard to replicate the same custom profile in the equalizer
Thanks for this great app, its fantastic

Sent from my GT-N7000 using Tapatalk 4 Beta
 

csmoore88

Senior Member
May 1, 2011
322
53
0
Sorry if I am posting in wrong place. The amount of resource regarding viper is staggering. I wish to share as I have found a couple great setting profiles on my tablet via Bluetooth motorola roadster with FM transmitter.

However, if I save a profile it resets configuration to default and closes app upon loading it. What am I doing wrong? Once I get it all set back up I will share mybsound...thanks.

Again sorry if I am in the wrong place b

(clever signature_here)
 

kingofnice

Senior Member
Jun 2, 2012
1,172
925
0
Is it possible for you to upload the file profile.pfr so we can simply add to folder viper4android/profile and than load from the app?
Because it is really hard to replicate the same custom profile in the equalizer
Thanks for this great app, its fantastic

Sent from my GT-N7000 using Tapatalk 4 Beta
Sometimes but it might not work. So we only do manual setup.

Sent from my HTC One X+ using Tapatalk 4 Beta
 
  • Like
Reactions: heatledger