[Read OP First] Official ViPER4Android Audio Profiles

Search This thread

SirSeun

Member
Apr 9, 2017
7
4
3
Those with Galaxy Buds..... This is all you need.....No need for ddc nor convolver as the sound accuracy is pretty good enough
 

Attachments

  • Screenshot_20210115-112446_ViPER4Android_FX.png
    Screenshot_20210115-112446_ViPER4Android_FX.png
    132 KB · Views: 147
  • Screenshot_20210115-112429_ViPER4Android_FX.png
    Screenshot_20210115-112429_ViPER4Android_FX.png
    149.8 KB · Views: 147
  • Screenshot_20210115-112435_ViPER4Android_FX.png
    Screenshot_20210115-112435_ViPER4Android_FX.png
    154.5 KB · Views: 142

EzerchE

Senior Member
Jan 31, 2013
268
53
48
Istanbul
Hi all

My new Sony WH1000-XM3 preset is here, its more simple and i like it so far;

Viper DDC: On, Listening Device: Sony MDR-E888
Dynamic System: On, Extreme Headphone v2, Select Dynamic Bass 20%
Viper Bass: On, Pure Bass+, Bass Frequency: 55 Hz, Bass Boost: 8.0 db
Viper Clarity: On, Ozone+, Clarity: 14.8 db

I use it with Dolby DPlus(optional);
Music / Open EQ

and Ainur Narsil Magisk Module (optional).

and this one is for Galaxy Buds (almost same);

Viper DDC: On, Listening Device: Sony MDR-E888
FIR equalizer: 31:3.7, 63:3.6, 125:2.8, 250:2.0, 500:1.5, 1k:1.8, 2k:3.1, 4k:4.5, 8k:5.5, 16k:5.7 (optional)
Dynamic System: On, High-end Headphone v2, Select Dynamic Bass 25%
Viper Bass: On, Pure Bass+, Bass Frequency: 60 Hz, Bass Boost: 8.0 db
Viper Clarity: On, Ozone+, Clarity: 10 db

This is it, i think this presets with some little tweaks, will suit almost on all headphones, you can try it and please do comment.
 
Last edited:

Skiamakhia

Member
Aug 5, 2019
45
18
18
I recently bought the Tronsmart Apollo Q10 just to try it out, and even though it's cheap I kinda like it.

But I would like to see if I can improve it a bit with the V4A module, but I have no idea what all the settings do and what would be good and such.

Are there any "general" settings that improve the sound of a cheap BT headphone with ANC (if that matters)?
Aside from that I am using the QCY T2C BT buds.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 124
    If you want to share at another forum, PM me to request maintainer permission.​
    V4Arena Facebook Chat Room(Please join!): www.facebook.com/groups/v4a.en
    Original ViPER520 Post: https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/543409_545378615533820_1857812272_n.png/

    OP Index:
    1. Information
    2. Personal Profiles
    3. Setting a Profile



    Purpose: Have you found an amazing profile setup for music and want to share? This is the Place!

    Notice: For those who think uploading the profile file will be easier. Your right, it would be easier. Most likely though, using this file from device to device will not function properly. Therefore, just share the way asked.

    To share simply make a post in this format:

    If a feature is not being used go ahead and leave it out.

    FX:

    1. MASTER POWER:
    (ii) Force Enable V4A
    2. PLAYBACK CONTROL GAIN:
    (ii) Select Effect Strength:
    (iii) Max Gain:
    (iv) Max Output:
    3. VIPER-DDC:
    (ii) Listening Device:
    4. SPECTRUM EXTENSION:
    (ii) Strength:
    5. FIREQUALIZER:
    (ii) Select Preset:
    6. CONVOLVER:
    (ii) Impulse Response:
    (iii) Cross Chanel
    7. FIELD SURROUND:
    (i) Select Field Surround Strength:
    (ii) Select Mid Image Strength:
    8. DIFFERENTIAL SURROUND:
    (i) Select Delay Time:
    9. HEADPHONE SURROUND +:
    (i) Select Effect Quality:
    10. REVERBERATION:
    (i) Room Size:
    (ii) Sound Field:
    (iii) Damping Factor:
    (iv) Wet Signal:
    (v) Dry Signal:
    11. DYNAMIC SYSTEM:
    (i) Select Listening Device:
    (ii) Select Dynamic Bass:
    12. TUBE SIMULATOR (6N1J):
    13. FIDELITY CONTROL:

    (i) Enable ViPER Bass:
    Select Bass Mode:
    Select Bass Frequency:
    Select Bass Boost:
    (ii) Enable ViPER Clarity:
    Select Clarity Mode:
    Select Clarity:
    14. AUDITORY SYSTEM PROTECTION:
    (ii) Select Binaural Level:
    15. MASTER GATE (Limiter):
    (i) Output Gain:
    (ii) Channel Pan:
    (iii) Limit Threshold:
    See Personal Profiles below for a hint of what to do!


    Download V4A FX & XHiFi
    Note: This product is completely free, of course, you can donate to ViPER520(creator) or zhuhang.
    Make sure you are connected to internet when installing V4A. So we can calculate number of installations. Thanks.
    Refer to the Official Thread HERE to install and troubleshoot.
    103
    Personal Profiles // Carnage Profiles

    Personal Profiles
    Here are some awesome Profiles from zhuhang and I!

    My Profile:
    Carnage 4.1

    For a clearly amazing experience with your music!
    Code Name: Twinkle


    Made with ATH-M50 // M50x
    FX:

    1. MASTER POWER:
    (ii) Force Enable V4A:
    2. PLAYBACK CONTROL GAIN:
    (ii) Select Effect Strength: Slight
    (iii) Max Gain: 4x
    (iv) Max Output: 0 dB
    3. VIPER-DDC:
    (ii) Listening Device:
    4. SPECTRUM EXTENSION:
    (ii) Strength:
    5. FIREQUALIZER:
    (ii) Select Preset: Custom
    Custom Equalixer FX:
    +3.1, +2.5, +1.5, +0.8, +1.3, +2.0, +1.6, +1.1, +2.2, +2.8
    6. CONVOLVER:
    (ii) Impulse Response:
    (iii) Cross Chanel:
    7. FIELD SURROUND:
    (i) Select Field Surround Strength:
    (ii) Select Mid Image Strength:
    8. DIFFERENTIAL SURROUND:
    (i) Select Delay Time:
    9. HEADPHONE SURROUND +:
    (i) Select Effect Quality:
    10. REVERBERATION:
    (i) Room Size:
    (ii) Sound Field:
    (iii) Damping Factor:
    (iv) Wet Signal:
    (v) Dry Signal:
    11. DYNAMIC SYSTEM:
    (i) Select Listening Device: Extreme Headphone (v2)
    (ii) Select Dynamic Bass: 9 Percent
    12. TUBE SIMULATOR (6N1J):
    13. FIDELITY CONTROL:

    (i) Enable ViPER Bass:✔
    Select Bass Mode: Natural
    Select Bass Frequency: 80 Hz
    Select Bass Boost: 8.0 dB
    (ii) Enable ViPER Clarity:✔
    Select Clarity Mode: Natural
    Select Clarity: 6.0 dB
    14. AUDITORY SYSTEM PROTECTION:
    (ii) Select Binaural Level:
    15. MASTER GATE (Limiter):
    (i) Output Gain: -6.0 dB
    (ii) Channel Pan: 0.5 : 0.5
    (iii) Limit Threshold: 0 dB

    Made with JVC HA-FX30 (The Original Carnage Profile)
    FX:

    1. MASTER POWER:
    (ii) Force Enable V4A:
    2. PLAYBACK CONTROL GAIN:
    (ii) Select Effect Strength: Moderate
    (iii) Max Gain: 2x
    (iv) Max Output: 0 dB
    3. VIPER-DDC:
    (ii) Listening Device:
    4. SPECTRUM EXTENSION:
    (ii) Strength:
    5. FIREQUALIZER:
    (ii) Select Preset: Custom
    Custom Equalixer FX:
    +3.0, +1.5, +1.0, +1.6, +1.4, +2.1, +2.9, +2.3, +3.8, +2.5
    6. CONVOLVER:
    (ii) Impulse Response:
    (iii) Cross Chanel:
    7. FIELD SURROUND:
    (i) Select Field Surround Strength:
    (ii) Select Mid Image Strength:
    8. DIFFERENTIAL SURROUND:
    (i) Select Delay Time:
    9. HEADPHONE SURROUND +:
    (i) Select Effect Quality:
    10. REVERBERATION:
    (i) Room Size:
    (ii) Sound Field:
    (iii) Damping Factor:
    (iv) Wet Signal:
    (v) Dry Signal:
    11. DYNAMIC SYSTEM:
    (i) Select Listening Device: Common Earphone (v2)
    (ii) Select Dynamic Bass: 14 Percent
    12. TUBE SIMULATOR (6N1J):
    13. FIDELITY CONTROL:

    (i) Enable ViPER Bass:✔
    Select Bass Mode: Natural
    Select Bass Frequency: 66 Hz
    Select Bass Boost: 3.5 dB
    (ii) Enable ViPER Clarity:✔
    Select Clarity Mode: Natural
    Select Clarity: 6.0 dB
    14. AUDITORY SYSTEM PROTECTION:
    (ii) Select Binaural Level:
    15. MASTER GATE (Limiter):
    (i) Output Gain: 0 dB
    (ii) Channel Pan: 0.5 : 0.5
    (iii) Limit Threshold: 0 dB

    Made with JVC HA-FR37
    FX:

    1. MASTER POWER:
    (ii) Force Enable V4A:
    2. PLAYBACK CONTROL GAIN:
    (ii) Select Effect Strength: Slight
    (iii) Max Gain: 3x
    (iv) Max Output: -1.0 dB
    3. VIPER-DDC:
    (ii) Listening Device:
    4. SPECTRUM EXTENSION:
    (ii) Strength:
    5. FIREQUALIZER:
    (ii) Select Preset: Custom
    Custom Equalixer FX:
    +3.0, +1.9, +1.3, +1.6, +1.4, +2.2, +1.7, +0.7, +1.4, +0.8
    6. CONVOLVER:
    (ii) Impulse Response:
    (iii) Cross Chanel:
    7. FIELD SURROUND:
    (i) Select Field Surround Strength:
    (ii) Select Mid Image Strength:
    8. DIFFERENTIAL SURROUND:
    (i) Select Delay Time:
    9. HEADPHONE SURROUND +:
    (i) Select Effect Quality:
    10. REVERBERATION:
    (i) Room Size:
    (ii) Sound Field:
    (iii) Damping Factor:
    (iv) Wet Signal:
    (v) Dry Signal:
    11. DYNAMIC SYSTEM:
    (i) Select Listening Device: Common Earphone (v2)
    (ii) Select Dynamic Bass: 1 Percent
    12. TUBE SIMULATOR (6N1J):
    13. FIDELITY CONTROL:

    (i) Enable ViPER Bass:✔
    Select Bass Mode: Natural
    Select Bass Frequency: 66 Hz
    Select Bass Boost: 8.0 dB
    (ii) Enable ViPER Clarity:✔
    Select Clarity Mode: Natural
    Select Clarity: 6.0 dB
    14. AUDITORY SYSTEM PROTECTION:
    (ii) Select Binaural Level: Slight
    15. MASTER GATE (Limiter):
    (i) Output Gain: -3.0 dB
    (ii) Channel Pan: 0.5 : 0.5
    (iii) Limit Threshold: 0 dB

    Made with Logitech S715i
    FX:

    1. MASTER POWER:
    (ii) Force Enable V4A:
    2. PLAYBACK CONTROL GAIN:
    (ii) Select Effect Strength:
    (iii) Max Gain:
    (iv) Max Output: 0 dB
    3. VIPER-DDC:
    (ii) Listening Device:
    4. SPECTRUM EXTENSION:
    (ii) Strength:
    5. FIREQUALIZER:
    (ii) Select Preset: Custom
    Custom Equalixer FX:
    +1.9, +1.6, +2.1, +3.0, +3.2, +4.3, +3.9, +4.6, +5.0, +3.7
    6. CONVOLVER:
    (ii) Impulse Response:
    (iii) Cross Chanel:
    7. FIELD SURROUND:
    (i) Select Field Surround Strength:
    (ii) Select Mid Image Strength:
    8. DIFFERENTIAL SURROUND:
    (i) Select Delay Time:
    9. HEADPHONE SURROUND +:
    (i) Select Effect Quality:
    10. REVERBERATION:
    (i) Room Size:
    (ii) Sound Field:
    (iii) Damping Factor:
    (iv) Wet Signal:
    (v) Dry Signal:
    11. DYNAMIC SYSTEM:
    (i) Select Listening Device:
    (ii) Select Dynamic Bass:
    12. TUBE SIMULATOR (6N1J):
    13. FIDELITY CONTROL:

    (i) Enable ViPER Bass:✔
    Select Bass Mode: Natural
    Select Bass Frequency: 66 Hz
    Select Bass Boost: 6.0 dB
    (ii) Enable ViPER Clarity:✔
    Select Clarity Mode: Natural
    Select Clarity: 8.0 dB
    14. AUDITORY SYSTEM PROTECTION:
    (ii) Select Binaural Level:
    15. MASTER GATE (Limiter):
    (i) Output Gain: 0 dB
    (ii) Channel Pan: 0.5 : 0.5
    (iii) Limit Threshold: -1.9 dB




    Please Note: The Profiles below this are for Reference.

    zhuhang's Profiles
    Extreeme Clarity Profile (V4A FX & XHiFi Co-exists) - Headset Only

    FX:

    1. Master Power: ✔
    2. Playback Gain Control: ✔
    (ii) Select Effect Strength: Slight //Moderate
    (iii) Max Gain: 4x //8x
    (iv) Max Output: -1.9dB
    3. FIR Equalizer: ✔
    (ii) Select Preset: Acoustic*
    4. Convolver: ✔
    (ii) Impulse Response: Sony Xperia Clear Audio+ Try: SPL GoldMike Impulse w Flair//DBX//JoeMeek *PopEQ
    5. Field Surround: ✘
    6. Reverberation: ✘
    7. Dynamic System: ✘
    (iv) Tube Simulator(6N1J): ✘
    8. Auditory System Protection (Cure Tech+): ✔
    (ii) Select Binaural Level: Moderate

    XHIFI:
    1. Master Power: ✔
    2. Playback Gain Control: ✘
    3. FIR Equalizer: ✔
    (ii) Select Preset: Vocal Boost**
    4. Audio Reconstruction: ✔
    (ii) Hi Clarity: 100**
    (iii) Lo Contour: 70*
    * Adjust to your desired bass level
    ** Adjust to your desired vocal level
    ExplOOit Bass Profile (V4A FX & XHiFi Co-exists) - Headset Only

    FX:

    1. Master Power: ✔
    2. Playback Gain Control: ✔
    (ii) Select Effect Strength: Slight //Moderate
    (iii) Max Gain: 4x //8x
    (iv) Max Output: -1.9dB
    3. FIR Equalizer: ✔
    (ii) Select Preset: Acoustic*
    4. Convolver: ✔
    (ii) Impulse Response: Sony Xperia Clearbass Try: PopEQ
    5. Field Surround: ✘
    6. Reverberation: ✘
    7. Dynamic System: ✔
    (ii) Select Listening Device: Common Earphone(v2)*
    (iii) Select Dynamic Bass: 100 Percent*
    (iv) Tube Simulator(6N1J): ✘
    8. Auditory System Protection (Cure Tech+): ✔
    (ii) Select Binaural Level: Slight

    XHIFI:
    1. Master Power: ✔
    2. Playback Gain Control: ✘
    3. FIR Equalizer: ✔
    (ii) Select Preset: Bass Boost**
    4. Audio Reconstruction: ✔
    (ii) Hi Clarity: 80**
    (iii) Lo Contour: 100*
    * Adjust to your desired bass level
    ** Adjust to your desired vocal level


    Others will not be added if requested! Just post to share. Enjoy the Profiles!​
    51
    Enhanced Clarity Pure Bass+ 2.0

    My Profile: Enhanced Clarity Pure Bass+ 3.0
    For a stunning all-in-one (dance, acoustic, rock, metal, alternative, techno, house, hip hop, etc.) and beautifully clear, pure bass, and quality audio experience used with: Headphones/Earpiece/Auxillary

    FX:
    1. Master Power: ✔
    2. Playback Gain Control: ✘

    3. FIREqualizer: ✔
    -Select Preset: Custom
    –[-2.5] [+2.0] [+6.0] [+3.0] [+0.0] [+0.0] [+0.0] [+3.5] [+1.5] [-3.5]
    4. Convolver: ✔
    -Impulse Response: Dolby Pro Logic II.irs
    -Cross Channel: 0
    5. Field Surround: ✘
    6. Differential Surround: ✘
    7. Headphone Surround +: ✘
    8. Reverberation: ✘
    9. Dynamic System: ✘
    10. Fidelity Control: ✔

    -Enable ViPER Bass: ✔
    –Select Bass Mode: Pure Bass+
    –Select Bass Frequency: 80 Hz
    –Select Bass Boost: 10.0 dB

    -Enable ViPER Clarity: ✔
    –Select Clarity Mode: OZone+
    –Select Clarity: 12.0 dB

    11. Auditory System Protection (Cure Tech+): ✔
    -Select Binaural Level: Extreme
    12. Master Gate (Limiter)
    -Output Gain: 2.9 dB
    -Channel Pan: 0.5 : 0.5 dB
    -Limit Threshold: -1.0 dB

    XHiFi:
    1. Master Power: ✔
    2. Playback Gain Control: ✘
    3. FIREqualizer: ✘

    4. Audio Reconstruct: ✔
    -Hi Clarity: 70
    -Lo Contour: 50
    5. Master Gate (Limiter): ✘


    Credits:
    [email protected]_Jake for Dolby Pro Logic II.IRS in this thread.
    39
    How to set an Audio Profile

    How to Set an Audio Profile

    Step by Step:
    1. Find the Profile you would like to use.
    2. Download V4A FX and/or XHiFi
    3. Open either app and switch to the device the profile uses.
    4. Enter all that you see on the profile.
    5. Enjoy the amazing sound!
    25
    Rx Pain Killers

    Here I present my new creation, a set of 3 profiles I call "Pain Killers"

    There are 3 settings: Morphine, Oxycontin and Percocet. ;)
    Remember, "Dont mix your pills or else" :p

    To use them, just leave everything default and apply VDC and IRS accordingly.
    Tested them myself in 3 different set of earphones: Piston v2, SONY MDR-EX90 LP and Westone 3 and I loved the sound coming from them (specially the second profile).

    Thanks for trying them and I hope you enjoy them as much as I did making them. :good:

    The files are attached below, enjoy them and please thank the post if you appreciate my work.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone