• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[RECOVERIES][P31xx] TWRP | PhilZ Touch | CWM

Status
Not open for further replies.
Search This thread

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,246
andi34.github.io
Recovery Downloads

Supported recoveries:
* TWRP
--------------------------------------------------------
* PhilZ-Touch-Recovery
CWM Base v6.0.5.1; Advanced Edition v6.59.x (discontinued)
--------------------------------------------------------
* CWM 6.0.5.1-Swipe (discontinued)
--------------------------------------------------------


Hey together!

You´ll find different Recoverys for P3100 and P3110/P3113 in this Thread :)

All latest Recovery´s can flash Android 4.4 (KitKat) Roms!

Enjoy!



1. Screenshots, general information, credits etc. (this post)

2. Information about the Recovery´s

3. Downloads

4. General FAQ & Developer FAQ & Recovery Changelog


Encryption - TWRP is a must have!
  1. Backup all important stuff! We need to format the device!
  2. Make sure using latest TWRP
  3. Wipe -> Advanced Wipe:
    • Cache
    • Dalvic
    • System
    • Data
  4. Wipe -> Format Data -> Type yes to confirm
    This is the most important step! It will keep some space for the footer! Without that encryption is not possible!
  5. Flash Rom
  6. Reboot
  7. Set a Pin for Lockscreen
  8. Encrypt your device

If done boot back in TWRP - TWRP will promt you to enter the PIN :)

If you haven't done Step 4 you'll get this error in logcat:
Code:
E/Cryptfs (  105): Orig filesystem overlaps crypto footer region.  Cannot encrypt in place.
Wipe->Format Data is the only method that fully recreates the file system and obeys the length needed for encryption!

TWRP
Thanks
@Dees_Troy and all the TWRP-Team for this great recovery
@ketut.kumajaya for his "android_kernel_samsung_espresso10" source
@CodyF86 for CM11 tree and his forked "android_kernel_samsung_espresso10" source; but i needed to switch to CM10.2
@gr8nole for helping me make internal SD visibile in TWRP, fix Touch-Orientation etc.
@ CyanogenMod-Team (thanks @codeworkx for supporting our device) for CM10.2 source
@ All testers: @antutu @philidor @zaid.oj @zeetherocker


PhilZ-Touch-Recovery (Advanced CWM)
Thanks @Phil3759 for his Advanced CWM
Main-Thread for PhilZ Touch Recovery: http://forum.xda-developers.com/showthread.php?t=2201860


ClockworkMod Recovery (CWM) Swipe-Edition
Thanks
@ketut.kumajaya for his "android_kernel_samsung_espresso10" source
@CodyF86 for CM11 tree and his forked "android_kernel_samsung_espresso10" source
@ CyanogenMod-Team (thanks @codeworkx for supporting our device) for CM10.2 source

XDA:DevDB Information
[P31xx] Recoveries: TWRP | PhilZ Touch | CWM, Tool/Utility for the Samsung Galaxy Tab 2

Contributors
Android-Andi

Version Information
Status: Stable

Created 2014-05-20
Last Updated 2015-08-03
 
Last edited:

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,246
andi34.github.io
All latest Recovery´s can flash KitKat-Roms without getting "Error: 7" like using older recoverys


TWRP

I builded this recovery from source, thanks to all who made this possible!
It wasn´t really easy - my flashcounter now > 20 :D But it´s working :)

How to flash a zip (it´s not laggy - it´s only because it´s recorded from screenshots :D):


PhilZ-NON-Touch-Recovery (Advanced CWM)
CWM Base; Advanced Edition


Missing Features from PhilZ TOUCH:
  • all gui options, include touch code
  • name the backup folder with current ROM name
  • custom zip install menu (Free Browse Mode + custom startup folder)
  • Create Update.zip from current ROM or from pre-existing backups
  • misc nandroid settings menu (but /preload is included by default and I added option to toggle compression under backup format menu)

All Information about Features etc. in PhilZ Touch Main-Thread

On-Screen Navigation:
  • Swipe somewhere on your screen up / down to change selections
  • Swipe to right to enter
  • Swipe left to go back

How to flash a zip:
Same like CWM - you only have more features.


CWM

How to flash a zip (it´s not laggy - it´s only because it´s recorded from screenshots :D)

On-Screen Navigation:
  • Swipe somewhere on your screen up / down to change selections
  • Swipe to right to enter
  • Swipe left to go back
 
Last edited:

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,246
andi34.github.io
FAQ

GENERAL
1. I found a bug.
You can post all bugs in this Thread! Please tell us your Device and the File / Recovery (including Version number) you are using.
You can use your recovery to safe a recover.log on your device - you can post this log and me or other user will have a look on it.
Please give us detailed information - this meight speed up to fix it ;)

2. I am getting "Error: 7" in recovery, what is wrong?
  • Be sure you flashed a Recovery for your device!
    [For P3100 = P3100 Recovery ; P3110 = P3110 Recovery ; P3113 = Use P3110 Recovery(!)]
  • Be sure the file was made for your device!
  • Try the latest Version of Recovery for your device, maybe your recovery is to old!

For KitKat (Android 4.4):
All latest Recovery's posted here now can flash Android 4.4 Roms! You will get "Error: 7" if you use an older reovery!
Minimum: CWM 6.0.4.4 or TWRP 2.6.3.1 or PhilZ NON Touch 6.00.1 (Advanced CWM) - or use any newer Version if available for your device!

3. Why there is no Portrait Recovery?
ketut.kumajaya:
"(...) Samsung used the easiest way to rotate a landscape framebuffer device as a portrait device: rotate the touchscreen driver and then leave the surfaceflinger to rotate Android graphics. A framebuffer application (recovery, AROMA) still detect the framebuffer orientation as landscape. Back rotate the touchscreen orientation is much easier than rotate the framebuffer and LCD driver."


DEVELOPER
1. How to compile this recoverys from source?
You need to compile CWM first! It it works you can try building TWRP or Advanced CWM / PhilZ NON Touch recoverys!

2. How to compile cwm from source?
Follow the Guide on how to compile CyanogenMod from Source for P3110 - you need this setup!
(For p3100 replace "p3110" with "p3100")
Small changes to this Guide at the moment:
  • Replace
    Code:
    repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
    with init for CM10.2 source:
    Code:
    repo init -u git://github.com/CyanogenMod/android.git -b cm-[U][B]10.2[/B][/U]
  • Follow the Guide until you come to this:mentined
    Code:
    $ brunch p3110
    to build recovery you need to enter this instead "brunch":
    Code:
    make clean && make -j# recoveryimage
    (Replace the # with the core count +1, so if you have a dual core it's -j3 and a quad core becomes -j5, etc.)
  • If it finished compileing (if nothing goes wrong):
    Code:
    cd $OUT
  • You'll have your "recovery.img" inside it :)
  • You can flash it and see if it works!

3. I compiled a working CWM, how to compile PhilZ NON Touch from source?
Visit PhilZ Main-Thread and read the Developer Informations. You will find it here.

4 I compiled a working CWM and/or PhilZ NON Touch, how to compile TWRP from source?
You will find all informations here: [DEV]How to compile TWRP touch recovery
(You will maybe need to use https://github.com/TeamWin/Team-Win-Recovery-Project/tree/twrp2.7 as source instead the source from Omnirom)



Usefull links for Devs:
Unpacking and repacking recovery or boot image (LINUX!): http://www.imajeenyus.com/computer/20130301_android_tablet/android/unpack_repack_recovery_image.html
Complete Installation Guide for Android SDK on Ubuntu: http://askubuntu.com/questions/318246/complete-installation-guide-for-android-sdk-on-ubuntu
How to Install Oracle Java JDK on Ubuntu Linux: http://www.wikihow.com/Install-Oracle-Java-JDK-on-Ubuntu-Linux



More will be added later... i am thinking about it (what to add) :p



Recovery-Changelog

Changelog TWRP:
Code:
28.01.2014
2.6.3.4 --> 2.6.3.5
Backup-Fix:
"Clear the relative directory before passing on to twrpTar with the static du object. 
Otherwise we will not backup /system/media etc"

23.01.2014
2.6.3.3 --> 2.6.3.4
Compiled on Omni´s Android 4.4.2 Source as base
support using old property system
USB Support

01.12.2013
2.6.3.2 --> 2.6.3.3: 
Recovery Kernel updated from 3.0.96-Espresso10++ to 3.0.101-blackhawk

Fixed Bug(s):
Wrong touch orientation in AromaFM (only P311X)

Source changes:
using now https://github.com/kumajaya/android_kernel_samsung_espresso10
-------------------------
30.11.2013
2.6.3.1 --> 2.6.3.2: 
Recovery Kernel updated from 3.0.31-CM-g010f848 to 3.0.96-Espresso10++

Source changes:
using now https://github.com/codyf86/android_kernel_samsung_espresso10/tree/cm-10.2
-------------------------
28.11.2013
2.6.3.1: Initial release

Base Source:
https://github.com/CyanogenMod -CM10.2 branch
Recovery: https://github.com/TeamWin/Team-Win-Recovery-Project/tree/twrp2.7

Changelog CWM Based Touch-Recovery from @Napstar
CWM Base v6.0.4.5

Code:
20.12.2013
Fix UI
---------------------
Initial Release 02.12.2013

Base Source:
https://github.com/CyanogenMod -CM10.2 branch
https://github.com/kumajaya/android_kernel_samsung_espresso10
https://github.com/Napstar-xda/android_bootable_recovery

Changelog PhilZ NON Touch Recovery / Advanced CWM:
Code:
24.01.2014
6.09.3 --> 6.10.6
inkl. Swipe Feature: 
CWM Base v6.0.4.7; 
Advanced Edition v6.10.6

(...)

10.12.2013
6.01.5 --> 6.02.1:
[COLOR="Red"]branch cm-10.2 dies here! (for Advanced CWM and PhilZ Touch)[/COLOR]
-------------------------
09.12.2013
6.00.5 --> 6.01.5:
Recovery Kernel updated to 3.0.101-blackhawk
Added Swipe-Feature

Source changes:
https://github.com/kumajaya/android_kernel_samsung_espresso10
-------------------------
6.00.1: Initial release

Base Source:
https://github.com/CyanogenMod -CM10.2 branch
Recovery: https://github.com/PhilZ-cwm6/philz_touch_cwm6


Changelog CWM / CWM-Swipe-Edition:
24.01.2014
6.0.4.7-Swipe Edition
(...)
Base Source:
https://github.com/Hellybean/android_bootable_recovery

Code:
03.12.2013
6.0.4.5-Swipe Edition
Base Source:
https://github.com/CyanogenMod -CM10.2 branch
-------------------------
6.0.4.5: taken from jenkins server (nightly 28.11.2013)
 
Last edited:

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,246
andi34.github.io
Updated again... sorry guys
Changelog TWRP:
Code:
2.6.3.2 --> 2.6.3.3: 
Recovery Kernel updated from 3.0.96-Espresso10++ to 3.0.101-blackhawk

Fixed Bug(s):
Wrong touch orientation in AromaFM (only P311X)
 
  • Like
Reactions: inaldocc and antutu

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,246
andi34.github.io
Hase someone seen this touch recovery before (i have compiled it for p3110 :D ):
c135itAh


https://github.com/Napstar-xda/android_bootable_recovery/tree/cm-10.2

maybe @Napstar can tell me how to fix the text on left side?
 
Last edited:
  • Like
Reactions: inaldocc

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,246
andi34.github.io

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,246
andi34.github.io
Special-Edition of CWM 6.0.4.5 will be available soon :) "Half-Touch" :D

CWM 6.0.4.5 Swipe-Edition

Swipe somewhere on your screen up / down to change selections
Swipe to right to enter
Swipe left to go back :)

Edit:
OP updated
Added Information, Changelog and Downloadlinks
 
Last edited:

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,246
andi34.github.io
3. Why there is no Portrait Recovery?
ketut.kumajaya:
"(...) Samsung used the easiest way to rotate a landscape framebuffer device as a portrait device: rotate the touchscreen driver and then leave the surfaceflinger to rotate Android graphics. A framebuffer application (recovery, AROMA) still detect the framebuffer orientation as landscape. Back rotate the touchscreen orientation is much easier than rotate the framebuffer and LCD driver."

If someone has a lot of time:
You can try makeing a portrait TWRP-Theme: http://teamw.in/project/twrp2themers
 

Android-Andi

Inactive Recognized Contributor
Mar 3, 2013
10,847
29,246
andi34.github.io
3. Why there is no Portrait Recovery?
ketut.kumajaya:
"(...) Samsung used the easiest way to rotate a landscape framebuffer device as a portrait device: rotate the touchscreen driver and then leave the surfaceflinger to rotate Android graphics. A framebuffer application (recovery, AROMA) still detect the framebuffer orientation as landscape. Back rotate the touchscreen orientation is much easier than rotate the framebuffer and LCD driver."

If someone has a lot of time:
You can try makeing a portrait TWRP-Theme: http://teamw.in/project/twrp2themers
 

Quantumrabbit

Senior Member
Apr 8, 2011
993
170
Essential Phone
OnePlus 7T
I just tried TWRP 2.6.3.3... I'm not sure which buttons are moved or missing, but on some screens, the buttons are all spaced out. Specifically like the reboot one, it looks like 2 options are just not there or the screen was rearranged to have a few empty slots.
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 104
    Recovery Downloads

    Supported recoveries:
    * TWRP
    --------------------------------------------------------
    * PhilZ-Touch-Recovery
    CWM Base v6.0.5.1; Advanced Edition v6.59.x (discontinued)
    --------------------------------------------------------
    * CWM 6.0.5.1-Swipe (discontinued)
    --------------------------------------------------------


    Hey together!

    You´ll find different Recoverys for P3100 and P3110/P3113 in this Thread :)

    All latest Recovery´s can flash Android 4.4 (KitKat) Roms!

    Enjoy!



    1. Screenshots, general information, credits etc. (this post)

    2. Information about the Recovery´s

    3. Downloads

    4. General FAQ & Developer FAQ & Recovery Changelog


    Encryption - TWRP is a must have!
    1. Backup all important stuff! We need to format the device!
    2. Make sure using latest TWRP
    3. Wipe -> Advanced Wipe:
      • Cache
      • Dalvic
      • System
      • Data
    4. Wipe -> Format Data -> Type yes to confirm
      This is the most important step! It will keep some space for the footer! Without that encryption is not possible!
    5. Flash Rom
    6. Reboot
    7. Set a Pin for Lockscreen
    8. Encrypt your device

    If done boot back in TWRP - TWRP will promt you to enter the PIN :)

    If you haven't done Step 4 you'll get this error in logcat:
    Code:
    E/Cryptfs (  105): Orig filesystem overlaps crypto footer region.  Cannot encrypt in place.
    Wipe->Format Data is the only method that fully recreates the file system and obeys the length needed for encryption!

    TWRP
    Thanks
    @Dees_Troy and all the TWRP-Team for this great recovery
    @ketut.kumajaya for his "android_kernel_samsung_espresso10" source
    @CodyF86 for CM11 tree and his forked "android_kernel_samsung_espresso10" source; but i needed to switch to CM10.2
    @gr8nole for helping me make internal SD visibile in TWRP, fix Touch-Orientation etc.
    @ CyanogenMod-Team (thanks @codeworkx for supporting our device) for CM10.2 source
    @ All testers: @antutu @philidor @zaid.oj @zeetherocker


    PhilZ-Touch-Recovery (Advanced CWM)
    Thanks @Phil3759 for his Advanced CWM
    Main-Thread for PhilZ Touch Recovery: http://forum.xda-developers.com/showthread.php?t=2201860


    ClockworkMod Recovery (CWM) Swipe-Edition
    Thanks
    @ketut.kumajaya for his "android_kernel_samsung_espresso10" source
    @CodyF86 for CM11 tree and his forked "android_kernel_samsung_espresso10" source
    @ CyanogenMod-Team (thanks @codeworkx for supporting our device) for CM10.2 source

    XDA:DevDB Information
    [P31xx] Recoveries: TWRP | PhilZ Touch | CWM, Tool/Utility for the Samsung Galaxy Tab 2

    Contributors
    Android-Andi

    Version Information
    Status: Stable

    Created 2014-05-20
    Last Updated 2015-08-03
    47
    All latest Recovery´s can flash KitKat-Roms without getting "Error: 7" like using older recoverys


    TWRP

    I builded this recovery from source, thanks to all who made this possible!
    It wasn´t really easy - my flashcounter now > 20 :D But it´s working :)

    How to flash a zip (it´s not laggy - it´s only because it´s recorded from screenshots :D):


    PhilZ-NON-Touch-Recovery (Advanced CWM)
    CWM Base; Advanced Edition


    Missing Features from PhilZ TOUCH:
    • all gui options, include touch code
    • name the backup folder with current ROM name
    • custom zip install menu (Free Browse Mode + custom startup folder)
    • Create Update.zip from current ROM or from pre-existing backups
    • misc nandroid settings menu (but /preload is included by default and I added option to toggle compression under backup format menu)

    All Information about Features etc. in PhilZ Touch Main-Thread

    On-Screen Navigation:
    • Swipe somewhere on your screen up / down to change selections
    • Swipe to right to enter
    • Swipe left to go back

    How to flash a zip:
    Same like CWM - you only have more features.


    CWM

    How to flash a zip (it´s not laggy - it´s only because it´s recorded from screenshots :D)

    On-Screen Navigation:
    • Swipe somewhere on your screen up / down to change selections
    • Swipe to right to enter
    • Swipe left to go back
    25
    FAQ

    GENERAL
    1. I found a bug.
    You can post all bugs in this Thread! Please tell us your Device and the File / Recovery (including Version number) you are using.
    You can use your recovery to safe a recover.log on your device - you can post this log and me or other user will have a look on it.
    Please give us detailed information - this meight speed up to fix it ;)

    2. I am getting "Error: 7" in recovery, what is wrong?
    • Be sure you flashed a Recovery for your device!
      [For P3100 = P3100 Recovery ; P3110 = P3110 Recovery ; P3113 = Use P3110 Recovery(!)]
    • Be sure the file was made for your device!
    • Try the latest Version of Recovery for your device, maybe your recovery is to old!

    For KitKat (Android 4.4):
    All latest Recovery's posted here now can flash Android 4.4 Roms! You will get "Error: 7" if you use an older reovery!
    Minimum: CWM 6.0.4.4 or TWRP 2.6.3.1 or PhilZ NON Touch 6.00.1 (Advanced CWM) - or use any newer Version if available for your device!

    3. Why there is no Portrait Recovery?
    ketut.kumajaya:
    "(...) Samsung used the easiest way to rotate a landscape framebuffer device as a portrait device: rotate the touchscreen driver and then leave the surfaceflinger to rotate Android graphics. A framebuffer application (recovery, AROMA) still detect the framebuffer orientation as landscape. Back rotate the touchscreen orientation is much easier than rotate the framebuffer and LCD driver."


    DEVELOPER
    1. How to compile this recoverys from source?
    You need to compile CWM first! It it works you can try building TWRP or Advanced CWM / PhilZ NON Touch recoverys!

    2. How to compile cwm from source?
    Follow the Guide on how to compile CyanogenMod from Source for P3110 - you need this setup!
    (For p3100 replace "p3110" with "p3100")
    Small changes to this Guide at the moment:
    • Replace
      Code:
      repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
      with init for CM10.2 source:
      Code:
      repo init -u git://github.com/CyanogenMod/android.git -b cm-[U][B]10.2[/B][/U]
    • Follow the Guide until you come to this:mentined
      Code:
      $ brunch p3110
      to build recovery you need to enter this instead "brunch":
      Code:
      make clean && make -j# recoveryimage
      (Replace the # with the core count +1, so if you have a dual core it's -j3 and a quad core becomes -j5, etc.)
    • If it finished compileing (if nothing goes wrong):
      Code:
      cd $OUT
    • You'll have your "recovery.img" inside it :)
    • You can flash it and see if it works!

    3. I compiled a working CWM, how to compile PhilZ NON Touch from source?
    Visit PhilZ Main-Thread and read the Developer Informations. You will find it here.

    4 I compiled a working CWM and/or PhilZ NON Touch, how to compile TWRP from source?
    You will find all informations here: [DEV]How to compile TWRP touch recovery
    (You will maybe need to use https://github.com/TeamWin/Team-Win-Recovery-Project/tree/twrp2.7 as source instead the source from Omnirom)



    Usefull links for Devs:
    Unpacking and repacking recovery or boot image (LINUX!): http://www.imajeenyus.com/computer/20130301_android_tablet/android/unpack_repack_recovery_image.html
    Complete Installation Guide for Android SDK on Ubuntu: http://askubuntu.com/questions/318246/complete-installation-guide-for-android-sdk-on-ubuntu
    How to Install Oracle Java JDK on Ubuntu Linux: http://www.wikihow.com/Install-Oracle-Java-JDK-on-Ubuntu-Linux



    More will be added later... i am thinking about it (what to add) :p



    Recovery-Changelog

    Changelog TWRP:
    Code:
    28.01.2014
    2.6.3.4 --> 2.6.3.5
    Backup-Fix:
    "Clear the relative directory before passing on to twrpTar with the static du object. 
    Otherwise we will not backup /system/media etc"
    
    23.01.2014
    2.6.3.3 --> 2.6.3.4
    Compiled on Omni´s Android 4.4.2 Source as base
    support using old property system
    USB Support
    
    01.12.2013
    2.6.3.2 --> 2.6.3.3: 
    Recovery Kernel updated from 3.0.96-Espresso10++ to 3.0.101-blackhawk
    
    Fixed Bug(s):
    Wrong touch orientation in AromaFM (only P311X)
    
    Source changes:
    using now https://github.com/kumajaya/android_kernel_samsung_espresso10
    -------------------------
    30.11.2013
    2.6.3.1 --> 2.6.3.2: 
    Recovery Kernel updated from 3.0.31-CM-g010f848 to 3.0.96-Espresso10++
    
    Source changes:
    using now https://github.com/codyf86/android_kernel_samsung_espresso10/tree/cm-10.2
    -------------------------
    28.11.2013
    2.6.3.1: Initial release
    
    Base Source:
    https://github.com/CyanogenMod -CM10.2 branch
    Recovery: https://github.com/TeamWin/Team-Win-Recovery-Project/tree/twrp2.7

    Changelog CWM Based Touch-Recovery from @Napstar
    CWM Base v6.0.4.5

    Code:
    20.12.2013
    Fix UI
    ---------------------
    Initial Release 02.12.2013
    
    Base Source:
    https://github.com/CyanogenMod -CM10.2 branch
    https://github.com/kumajaya/android_kernel_samsung_espresso10
    https://github.com/Napstar-xda/android_bootable_recovery

    Changelog PhilZ NON Touch Recovery / Advanced CWM:
    Code:
    24.01.2014
    6.09.3 --> 6.10.6
    inkl. Swipe Feature: 
    CWM Base v6.0.4.7; 
    Advanced Edition v6.10.6
    
    (...)
    
    10.12.2013
    6.01.5 --> 6.02.1:
    [COLOR="Red"]branch cm-10.2 dies here! (for Advanced CWM and PhilZ Touch)[/COLOR]
    -------------------------
    09.12.2013
    6.00.5 --> 6.01.5:
    Recovery Kernel updated to 3.0.101-blackhawk
    Added Swipe-Feature
    
    Source changes:
    https://github.com/kumajaya/android_kernel_samsung_espresso10
    -------------------------
    6.00.1: Initial release
    
    Base Source:
    https://github.com/CyanogenMod -CM10.2 branch
    Recovery: https://github.com/PhilZ-cwm6/philz_touch_cwm6


    Changelog CWM / CWM-Swipe-Edition:
    24.01.2014
    6.0.4.7-Swipe Edition
    (...)
    Base Source:
    https://github.com/Hellybean/android_bootable_recovery

    Code:
    03.12.2013
    6.0.4.5-Swipe Edition
    Base Source:
    https://github.com/CyanogenMod -CM10.2 branch
    -------------------------
    6.0.4.5: taken from jenkins server (nightly 28.11.2013)