• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

Development [RECOVERY] [11] [UNOFFICIAL] TeamWin Recovery Project

Search This thread

Nebrassy

Senior Member
Sep 17, 2015
937
1,569
Lattakia
Xiaomi Poco X3 Pro



Introduction:

Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

Key Features:

Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage

In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.

We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.

Source Code:

GitHub - https://github.com/TeamWin/android_bootable_recovery

Gerrit Instance - http://gerrit.twrp.me

If you have made your own TWRP build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.


Hello, this is TWRP, for Oneplus 9/Pro

this has only been tested on 9 Pro, let me know if there are any issues on Oneplus 9

Installation:
1. fastboot boot twrp.img
2. go to Advanced > Flash Current TWRP
3. after that is done, if you were using a custom kernel, reflash it now
4. if you were using magisk, reflash it now

Updating to a newer build:
1. download new build to internal storage
2. go to Advanced > Install Recovery Ramdisk
4. select the new image
5. after that is done, if you were using a custom kernel, reflash it now
6. if you were using magisk, reflash it now

Send me a beer: Crypto(Preferred) | PayPal

huge thanks to @osm0sis for help in making and testing this recovery

Trees:
https://github.com/nebrassy/device_oneplus_lemonadep-TWRP
https://github.com/nebrassy/device_oneplus_sm8350-common-TWRP

Telegram group: https://t.me/NSSFB

Download: https://www.androidfilehost.com/?w=files&flid=326293
 
Last edited:

djsubterrain

Senior Member
Jan 4, 2012
3,989
3,709
Livingston
OnePlus 9 Pro
@Nebrassy I'm getting a multi-coloured white noise image when booting from fastboot (Step 1 in installation)

Currently I have LOS recovery due to installing current version of crDroid, should it be a different process for us? I was also on OOS 11.2.6.6 beforehand as 11.2.7.7 isn't out for EU (LE2123) yet.

i.e. fastboot flash boot TWRP-3.5.1-lemonadep-Nebrassy.img
(Kind of wary of doing so due to the white noise image but that's how LOS recovery was applied for crDroid instructions)

(Also was it you getting N7 BADA to search testers?)
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    While TWRP development's ongoing here, I figured I'd also upload an OP9x Series version of my stock recovery adb insecure patching AK3 zip, which can be handy if, for example, after an OTA TWRP doesn't work anymore due to some change in OOS. So if something then goes wrong at least we've got decrypted data and adb shell dmesg access for our various devices via stock recovery. Attached below. Simply flash via FKM or EXKM once you're already rooted, before you flash TWRP, and then you may dump that patched stock recovery boot.img for later use.

    Supporting OnePlus9/lemonade, OnePlus9TMO/lemonadet, OnePlus9VZW/lemonadev, OnePlus9Pro/lemonadep and OnePlus9ProTMO/lemonadept.

    For OnePlus9R/lemonades see my OP8x+9R Series zip (since 9R is closer to 8T than 9): https://forum.xda-developers.com/t/...-unified-stable.4101313/page-57#post-84204575

    For more instructions see my original OP7T Series zip post: https://forum.xda-developers.com/t/...-adb-in-recovery.4002843/page-3#post-82376013
    4
    I just wanted to say thank you @Nebrassy . I now can have a recovery and do things like flash @kristofpetho s Omega Kernel.
    Hopefully, this will also take me one step closer to getting dual sim working on my AA OP9. many thanks from Mayberry!!
    4
    in the case where Flash Current TWRP fails, which is only happening for some people and not others, try going to the backup menu, refresh sizes and then try Flash Current TWRP again, let me know if that works for people who couldn't flash before so I add that to the OP
    3
    *Looks at forum header*
    3
    so how do i do this without being able to see the screen?
    "Then go to advanced Flash Current Twrp."
    that's what i've beensaying i am unable to do this hole time

    I think (not really sure) people are missing that you are literally blind, like, actually blind. Not just "figure of speech" blind.

    Sorry I have no advice to give. Good luck.
  • 44



    Introduction:

    Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

    Key Features:

    Touchscreen driven with real buttons and drag-to-scroll
    XML-based GUI that allows full customization of the layout true theming!
    Settings are saved to the sdcard and persist through reboots
    Ability to choose which partitions to back up and which to restore
    Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
    Onscreen keyboard
    Easy selection of internal/external storage

    In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.

    We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.

    Source Code:

    GitHub - https://github.com/TeamWin/android_bootable_recovery

    Gerrit Instance - http://gerrit.twrp.me

    If you have made your own TWRP build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.


    Hello, this is TWRP, for Oneplus 9/Pro

    this has only been tested on 9 Pro, let me know if there are any issues on Oneplus 9

    Installation:
    1. fastboot boot twrp.img
    2. go to Advanced > Flash Current TWRP
    3. after that is done, if you were using a custom kernel, reflash it now
    4. if you were using magisk, reflash it now

    Updating to a newer build:
    1. download new build to internal storage
    2. go to Advanced > Install Recovery Ramdisk
    4. select the new image
    5. after that is done, if you were using a custom kernel, reflash it now
    6. if you were using magisk, reflash it now

    Send me a beer: Crypto(Preferred) | PayPal

    huge thanks to @osm0sis for help in making and testing this recovery

    Trees:
    https://github.com/nebrassy/device_oneplus_lemonadep-TWRP
    https://github.com/nebrassy/device_oneplus_sm8350-common-TWRP

    Telegram group: https://t.me/NSSFB

    Download: https://www.androidfilehost.com/?w=files&flid=326293
    10
    While TWRP development's ongoing here, I figured I'd also upload an OP9x Series version of my stock recovery adb insecure patching AK3 zip, which can be handy if, for example, after an OTA TWRP doesn't work anymore due to some change in OOS. So if something then goes wrong at least we've got decrypted data and adb shell dmesg access for our various devices via stock recovery. Attached below. Simply flash via FKM or EXKM once you're already rooted, before you flash TWRP, and then you may dump that patched stock recovery boot.img for later use.

    Supporting OnePlus9/lemonade, OnePlus9TMO/lemonadet, OnePlus9VZW/lemonadev, OnePlus9Pro/lemonadep and OnePlus9ProTMO/lemonadept.

    For OnePlus9R/lemonades see my OP8x+9R Series zip (since 9R is closer to 8T than 9): https://forum.xda-developers.com/t/...-unified-stable.4101313/page-57#post-84204575

    For more instructions see my original OP7T Series zip post: https://forum.xda-developers.com/t/...-adb-in-recovery.4002843/page-3#post-82376013
    4
    I just wanted to say thank you @Nebrassy . I now can have a recovery and do things like flash @kristofpetho s Omega Kernel.
    Hopefully, this will also take me one step closer to getting dual sim working on my AA OP9. many thanks from Mayberry!!
    4
    in the case where Flash Current TWRP fails, which is only happening for some people and not others, try going to the backup menu, refresh sizes and then try Flash Current TWRP again, let me know if that works for people who couldn't flash before so I add that to the OP
    4
    released new build which solves the display issue on custom roms