Development [RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project

Search This thread

VIncentVegan

Member
Aug 4, 2013
24
3
Hi there!
I finally want to make the step from A11 and about to download everything I need. I'm a bit confused now though as the title of this thread says "[12] [OFFICIAL]", the official download though leads to twrp-3.6.2_11-0-sweet.img" as newest file and there's a link on first post leading to "Unofficial 12 builds".
Hence my question: Do I have to download the official or the unofficial build in order to install A12 with encryption enabled? (And also: Do I have to downgrade if I want to roll back to A12? If so: To which version?).

Thanks for your help! :)

Cheers,
VV
 
  • Like
Reactions: Fostel

cocopipou

Senior Member
Jul 24, 2016
200
69
Gembloux
Lenovo P2
Can i use for Android 12?
Why not ?
I used yesterday my installed TWRP to install this newest version dated 2022-09-13.
Up today, I was running "crDroid 8.8 2022-08-31".
A few minuts ago, I booted into twrp and flashed "crDroid 8.9 2022-09-13" without encountering any problem.
If You are aware of what You do You will no go into problems.
Nevertherless I can't be helded as responsible for damages which would happen to your phone due to...
 
  • Like
Reactions: [email protected]

cocopipou

Senior Member
Jul 24, 2016
200
69
Gembloux
Lenovo P2
Do I have to format data?
I already in a13, can you give me a proper installation?
Above all, DO NOT AT ALL format Data, otherwise You will loss all your data.

If Your installed recovery is TWRP, simply do as I did myself :
  1. click on the link after "Unofficial 12 builds: " on the first page of this thread ;
  2. download the latest version of the file dated 13-09-22 ;
  3. move the downloaded file to your SDcard ;
  4. reboot into recovery ;
  5. click on install ;
  6. select the file stored on your SDcard ;
  7. select the recovery partition ;
  8. swipe to install ;
  9. reboot into system.
As I already said in my precedent post above :
  1. Be aware of what You do You in order to avoid problems ;
  2. Nevertherless I can't be helded as responsible for damages which would happen to your phone due to...
 

littlecrap

Senior Member
Jul 12, 2016
57
3
Bali
Above all, DO NOT AT ALL format Data, otherwise You will loss all your data.

If Your installed recovery is TWRP, simply do as I did myself :
  1. click on the link after "Unofficial 12 builds: " on the first page of this thread ;
  2. download the latest version of the file dated 13-09-22 ;
  3. move the downloaded file to your SDcard ;
  4. reboot into recovery ;
  5. click on install ;
  6. select the file stored on your SDcard ;
  7. select the recovery partition ;
  8. swipe to install ;
  9. reboot into system.
As I already said in my precedent post above :
  1. Be aware of what You do You in order to avoid problems ;
  2. Nevertherless I can't be helded as responsible for damages which would happen to your phone due to...
Thank you

For DfE, which one support a13?
The DfE posted here seems not work.
 
Last edited:

jngiag

Senior Member
Jul 19, 2009
250
135
I tried TWRP-3.6.2-sweet-Nebrassy-13-09-22.img. It works perfectly flashing from A13 rom to another A13 rom without formating of data. Data was decrypted without the need to install any dfe. Restoring of data from backup in twrp is not working yet, ending in bootloop.
 

StewXz

Member
Aug 14, 2022
9
0
Is there a problem with that, I'm a bit new to this. I would be grateful if you could help me, I am using the ROM wonderfully but that does not leave me alone
IMG_20220923_045441.jpg
 

Fostel

Senior Member
Jan 16, 2013
70
14
London
OnePlus One
OnePlus X
I tried TWRP-3.6.2-sweet-Nebrassy-13-09-22.img. It works perfectly flashing from A13 rom to another A13 rom without formating of data. Data was decrypted without the need to install any dfe. Restoring of data from backup in twrp is not working yet, ending in bootloop.
Do you say that there is no point in doing backups as they will not work?
What about official TWRP 3.6.2?
Will backup work then?
 

jngiag

Senior Member
Jul 19, 2009
250
135
Do you say that there is no point in doing backups as they will not work?
What about official TWRP 3.6.2?
Will backup work then?

TWRP-3.6.2-sweet-Nebrassy-13-09-22.img can backup (A13 rom) data without error but restoring it ends up in bootloop. I am not too sure if it happens to others too. For me, the purpose of having data decrypted is to backup and restore it later when updating rom (in the case of dirty flash wouldn't work). I don't think the official twrp will work. Probably we have to wait for the developer to find a solution to this.
 
  • Like
Reactions: Fostel

jnsson

Senior Member
Official 3.7.0_12 is out. All features such A12 decryption (I assume FBE v2?) works, EROFS should work, F2FS compression also should work -- since all of those based on Nebrassy tree.


Thank you so much.
Does this means that we don't need to format data when we change ROM or is that not due to the problem TWRP has had with decryption?
 

Top Liked Posts

  • 1
    Same problem bootlooping after restoring data with twrp 3.7.0_12-sweet. So for me Nandroid restore is unusable for the moment with twrp:cry:

    Backup and restore in Twrp-3.7.0_12-0 works for Android 13. I tried it on riceDroid-13.0 and it works.
  • 1
    Same problem bootlooping after restoring data with twrp 3.7.0_12-sweet. So for me Nandroid restore is unusable for the moment with twrp:cry:

    Backup and restore in Twrp-3.7.0_12-0 works for Android 13. I tried it on riceDroid-13.0 and it works.
  • 52



    Introduction:

    Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

    Key Features:

    Touchscreen driven with real buttons and drag-to-scroll
    XML-based GUI that allows full customization of the layout true theming!
    Settings are saved to the sdcard and persist through reboots
    Ability to choose which partitions to back up and which to restore
    Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
    Onscreen keyboard
    Easy selection of internal/external storage

    In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.

    We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.

    Source Code:

    GitHub - https://github.com/TeamWin/android_bootable_recovery

    Gerrit Instance - http://gerrit.twrp.me

    If you have made your own TWRP build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.

    Hello, this is TWRP, for Redmi note 10 Pro Global/Indian/Indian Pro Max (sweet/sweetin)

    touch and adb work
    SD card and USB OTG are working
    Decryption is working

    Send me a beer: Crypto(Preferred) | PayPal

    Tree: https://github.com/TeamWin/android_device_xiaomi_sweet

    Telegram group: https://t.me/NSSFB

    Download: https://twrp.me/xiaomi/xiaomiredminote10pro.html

    Unofficial 12 builds: https://www.pling.com/p/1835160/
    22
    New build is up

    Fixed adb sideload
    Fixed fastbootd
    Fixed vibration
    Fixed decryption on stock while flashed
    13
    New build, decryption now works

    Problems as of now are:
    adb sideload
    fastbootd
    vibration

    9
    Official builds have started

    8
    new unofficial build,
    Android 13 decryption
    Some misc fixes