-
Introducing XDA Computing: Discussion zones for Hardware, Software, and more! Check it out!
[RECOVERY][3.4.0-10][tucana]Official/Unofficial TWRP Xiaomi Mi Note 10/CC9 Pro(Stable)
- Thread starter mauronofrio
- Start date
Is this unofficial 3.4.0-10 same with twrp official 3.5.0-9? If not, which the latest?
it seems that
suffix -10 means built in the android-10 tree
suffix -9 means built in the android-9 tree
see also https://twrp.me/site/update/2020/12/31/twrp-3.5.0-released.html
suffix -10 means built in the android-10 tree
suffix -9 means built in the android-9 tree
see also https://twrp.me/site/update/2020/12/31/twrp-3.5.0-released.html
Hi, a little question: do you have a link for pc drivers?
And for Android 11 what TWRP?
PS: conosci la famiglia Ottomano?
hi
I've been wondering for a long time why the touch screen is buggy in twrp
some times it is kind of dificult to unlock with pattern the twrp
and even navigate to some menu
is it on everyone or just me
I've been wondering for a long time why the touch screen is buggy in twrp
some times it is kind of dificult to unlock with pattern the twrp
and even navigate to some menu
is it on everyone or just me
It's not just you. The first time I attempt to unlock with the pattern, it never works. And all subsequent touch is laggy.
Hi!
tucana:/ # twrp decrypt **********
Attempting to decrypt data partition or user data via command line.
Failed to decrypt data.
The partition isn't flagged as encrypted, but it is (long story). Are there any more info as to why is the decryption fails?
I explained my situation here:
forum.xda-developers.com
tucana:/ # twrp decrypt **********
Attempting to decrypt data partition or user data via command line.
Failed to decrypt data.
The partition isn't flagged as encrypted, but it is (long story). Are there any more info as to why is the decryption fails?
I explained my situation here:
How to decrypt /sdcard from ADB?
Long story short, I screwed up, and now I have an encrypted storage (with my files that I want back) but TWRP and the OS thinks it is not. It goes like this: The Magisk v22.0 update screwed up my phone, which stuck in a bootloop. After...
forum.xda-developers.com
hi there. i have a big problem and i am trying to check if something is at fault on my end.
i have a xiaomi mi note 10 pro (the one with 256gb rom).
i have been using twrp to root my xi note 10 pro, every time xiaomi gets an update. for a year now, it has been an easy standard procedure.
Until tonight.
I just got an update. i downloaded it. root was lost.
went to fastboot to do the exact same procedure i am doing every time.
but this time, i am getting an error.
i get this message
PS C:\adb> fastboot flash recovery recovery.img
sending 'recovery' (131072 KB)...
FAILED (remote: unknown command)
finished. total time: 0.003s
flashing the image suddenly fails.
i have been using this image to root for a year now.
does it mean i have to use a new image perhaps?
this thread is for xiaomi mi note 10. But i have xiaomi mi note 10 pro (which is different because it has 256gb rom instead of 128gb). so could i retry using the image from this thread?
i am really sad that my root fails. i hope someone can help me. thank you very much
i have a xiaomi mi note 10 pro (the one with 256gb rom).
i have been using twrp to root my xi note 10 pro, every time xiaomi gets an update. for a year now, it has been an easy standard procedure.
Until tonight.
I just got an update. i downloaded it. root was lost.
went to fastboot to do the exact same procedure i am doing every time.
but this time, i am getting an error.
i get this message
PS C:\adb> fastboot flash recovery recovery.img
sending 'recovery' (131072 KB)...
FAILED (remote: unknown command)
finished. total time: 0.003s
flashing the image suddenly fails.
i have been using this image to root for a year now.
does it mean i have to use a new image perhaps?
this thread is for xiaomi mi note 10. But i have xiaomi mi note 10 pro (which is different because it has 256gb rom instead of 128gb). so could i retry using the image from this thread?
i am really sad that my root fails. i hope someone can help me. thank you very much
I'm trying to flash the latest twrp with stock 12.1.3.0 but it shows me gibberish. It works fine in miui eu 12.1.5.0. Any ideas on how to fix this? I tried factory reset after flashing but that didn't help.
Yes, i have. And i rebooted back into recovery afterwards and then did a factory reset. Still gibberish.
What do you call latest TWRP ? I have installed twrp-3.5.2_9-0-tucana.img this morning before installing (dirty flash) xiaomi.eu_multi_MINote10_MICC9Pro_21.5.12_v12-11.zip
Nvm I found it. Have no time to flash right now but will try in the morning, thnx.
Last edited:
So i install TWRP and then i install vbmeta using ADB sideload.
At least i think i did because ADB sideload writes at the beginning "unable to decrypt FBE device"
Anyway the TWRP recovery is not getting wipped so i think it's fine.
If you are trying to root now,after April's update the main problem you are going to face is that TWRP doesn't decrypt the /sdcard.
There are new versions of TWRP here https://dl.twrp.me/tucana/ but they also don't decrypt the /sdcard.
Also the sideload doesn't work for the ROM ZIP and i don't know why.
So the only 2 ways to load a custom ROM are:
from a OTG USB (haven't try it) or
Get lucky and succeed on pushing the zip file using adb.
For me the success rate is around 30% no clue why.
After pushing it you can install it from the TWRP recovery.
Also you need to Format Data not just factory reset if you installing new ROM.
It will take 10 min give or take to boot.
That at least worked for me.
P.S. Having tried almost all the ROMs I'd say my favorite is the 12.0.2 because on that one gestures still work with 3rd party launchers so i highly recommend it.
One the other hand the 12.1.5 froze my phone twice on the WIFI setup so i would recommend to avoid it.
At least i think i did because ADB sideload writes at the beginning "unable to decrypt FBE device"
Anyway the TWRP recovery is not getting wipped so i think it's fine.
If you are trying to root now,after April's update the main problem you are going to face is that TWRP doesn't decrypt the /sdcard.
There are new versions of TWRP here https://dl.twrp.me/tucana/ but they also don't decrypt the /sdcard.
Also the sideload doesn't work for the ROM ZIP and i don't know why.
So the only 2 ways to load a custom ROM are:
from a OTG USB (haven't try it) or
Get lucky and succeed on pushing the zip file using adb.
For me the success rate is around 30% no clue why.
After pushing it you can install it from the TWRP recovery.
Also you need to Format Data not just factory reset if you installing new ROM.
It will take 10 min give or take to boot.
That at least worked for me.
P.S. Having tried almost all the ROMs I'd say my favorite is the 12.0.2 because on that one gestures still work with 3rd party launchers so i highly recommend it.
One the other hand the 12.1.5 froze my phone twice on the WIFI setup so i would recommend to avoid it.
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
17Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:#include <std_disclaimer.h> /* * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you. * */
Features:
- Decryption works
- Flash works
- Backup works
- Touch works
- Android 10 supported
- Android 11 Decryption
Download:
TWRP 3.4.0-10 Unofficial by mauronofrio
TWRP 3.4.0-0 Unofficial by mauronofrio
TWRP 3.3.1-4 Unofficial by mauronofrio
Official Links (Remember that the unofficial builds are always more updated)
TWRP 3.3.1-3 Unofficial by mauronofrio
TWRP 3.3.1-0 Unofficial by mauronofrio
To Flash the TWRP:
if it's the first time you flash the TWRP or you are getting problems of TWRP lost or device doesn't boot after flashed magisk or something else you need to flash a script to patch your vbmeta:
VBMETA PATCHER
To flash the TWRP:
Then reboot in TWRP manually or using a fastboot command.Code:fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
orCode:fastboot boot twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Flash the VBMETA PATCHER and reboot.Code:fastboot oem reboot-recovery
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_tucana
Precompiled stock kernel
My Telegram TWRP Support Group:
https://t.me/twrp_Mauronofrio
Donations:
Credits:
Created 2019-12-075TWRP 3.4.0-0 for Xiaomi Mi Note 10 (tucana) by mauronofrio:
Main changelog: https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
TWRP 3.4.0-0 Unofficial by mauronofrio4TWRP 3.4.0-10 for Xiaomi Mi Note 10 (tucana) by mauronofrio:
Fixed Android 11 Decryption;
Updated to latest official changes.
TWRP 3.4.0-10 Unofficial by mauronofrio4TWRP 3.3.1-3 Xiaomi Mi Note 10/CC9 Pro by mauronofrio:
- Added Android 10 Support;
- Fixed backup erro 255 when caused by /data/per_boot/
- General BugFix and Improvements.
TWRP 3.3.1-3 Unofficial by mauronofrio3
Have you tried to use fastboot boot?
If yes, flash the twrp and the use this command:
fastboot oem reboot-recovery
