[RECOVERY] Carliv Touch Recovery for Canvas Turbo A250/Clones

Search This thread

FSadino

Forum Moderator
Staff member
Oct 27, 2011
3,643
4,510
263
Blue River City
OnePlus One
OnePlus 3
Carliv Touch Recovery for Canvas Turbo A250/Clones


Requirements

1. Phone Rooted and Mobile Uncle Tools (Flash through Phone)
2. Sp Flash Tool(Fflash it from PC)




Downloads

NEW: Carliv Touch Recovery v2.7 (port using stock recovery) Original Thread by @carliv
Old: Carliv Touch Recovery 2.4 (build with CTR 2.4) Original Thread by @yuweng




Instructions (Flash using phone)

1. Download the recovery to your internal sd-card and rename it to "recovery.img"
2. Open Mobile uncle tools and select Recovery Update
3. Flash recovery file
4. Done


Instructions (Flash through SP Flash Tools)

1. Install drivers for your phone and download SP Flash Tools and drivers.
2. Click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device (you can drag from your stock rom folder)
3.Check only recovery.img, preloader and uncheck all others.
4. Switch off your phone (Wait 1 min).
5. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
6. Click the Download option (present on the right of Firmware > Upgrade option) and SP Flash Tools will start looking for your phone.
7. Connect your phone. SP Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
8. After the process completes, a green ring will appear on your device signalling that the process was successful.
9.Disconnect and turn on your phone.




Credits

@carliv
@adrpat
@yuweng
@FSadino





ALWAYS REMEMBER!!!
I Will Not Be Responsible For Any Bricked Devices or Any Problem So Use It At Your Own Risk.

XDA:DevDB Information
Carliv Touch Recovery OLD 2.4 & NEW 2.7, Tool/Utility for the Micromax Canvas Turbo A250

Contributors
FSadino, @carliv, @adrpat, @yuweng
Source Code: http://forum.xda-developers.com/android/development/guide-how-to-port-custom-cwm-based-t2970004


Version Information
Status: Stable

Created 2015-02-09
Last Updated 2015-02-11
 

Attachments

  • CTR-2_7-01.png
    CTR-2_7-01.png
    54.5 KB · Views: 259
  • CTR-2_7-02.png
    CTR-2_7-02.png
    56.4 KB · Views: 243
  • CTR-2_7-03.png
    CTR-2_7-03.png
    54.2 KB · Views: 247
  • CTR-2_7-04.png
    CTR-2_7-04.png
    54.2 KB · Views: 239
  • CTR-2_7-05.png
    CTR-2_7-05.png
    56.4 KB · Views: 241
  • CTR-2_7-06.png
    CTR-2_7-06.png
    55.7 KB · Views: 237
  • CTR-2_7-07.png
    CTR-2_7-07.png
    50.3 KB · Views: 235
  • CTR-2_7-08.png
    CTR-2_7-08.png
    54 KB · Views: 233
  • CTR-2_7-09.png
    CTR-2_7-09.png
    53.9 KB · Views: 235
  • CTR-2_7-10.png
    CTR-2_7-10.png
    55.5 KB · Views: 235
  • CTR-2_7-11.png
    CTR-2_7-11.png
    56.5 KB · Views: 241
  • CTR-2_7-12.png
    CTR-2_7-12.png
    77.5 KB · Views: 223
  • CTR-2_7-13.png
    CTR-2_7-13.png
    78.8 KB · Views: 231
Last edited:

adrpat

Senior Member
Aug 21, 2008
57
97
0
Porto
Which base carliv-recovery you used? I think mine doesn't have touch

use "CarlivTouch-recovery-2_4-1080x1920" its more stable

---------- Post added at 10:49 PM ---------- Previous post was at 10:21 PM ----------

I noticed that already exists a final version a Carliv Touch Recovery v2.7 rebuilt from base (cwm 6.0.3.7)
so here you have already compiled by me ;)

DOWNLOAD

you can use this kitchen to compile your way, just edit the res folder in ramdisk. use as sorce my recovery27 in the link above
recalls that the result recovery can not pass 6 Mb
Credits for Carliv (obvious...)
 
Last edited:
  • Like
Reactions: FSadino

FSadino

Forum Moderator
Staff member
Oct 27, 2011
3,643
4,510
263
Blue River City
OnePlus One
OnePlus 3
use "CarlivTouch-recovery-2_4-1080x1920" its more stable

---------- Post added at 10:49 PM ---------- Previous post was at 10:21 PM ----------

I noticed that already exists a final version a Carliv Touch Recovery v2.7 rebuilt from base (cwm 6.0.3.7)
so here you have already compiled by me ;)

DOWNLOAD

you can use this kitchen to compile your way, just edit the res folder in ramdisk. use as sorce my recovery27 in the link above
recalls that the result recovery can not pass 6 Mb
Credits for Carlvic (obvious...)

I didnt use this kitchen to compile my recovery but tomorrow i will use carliv_2.7 and kitchen.
If i succed, i will update this thread and give you the right credits
Thanks you so much

greets
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Carliv Touch Recovery for Canvas Turbo A250/Clones


    Requirements

    1. Phone Rooted and Mobile Uncle Tools (Flash through Phone)
    2. Sp Flash Tool(Fflash it from PC)




    Downloads

    NEW: Carliv Touch Recovery v2.7 (port using stock recovery) Original Thread by @carliv
    Old: Carliv Touch Recovery 2.4 (build with CTR 2.4) Original Thread by @yuweng




    Instructions (Flash using phone)

    1. Download the recovery to your internal sd-card and rename it to "recovery.img"
    2. Open Mobile uncle tools and select Recovery Update
    3. Flash recovery file
    4. Done


    Instructions (Flash through SP Flash Tools)

    1. Install drivers for your phone and download SP Flash Tools and drivers.
    2. Click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device (you can drag from your stock rom folder)
    3.Check only recovery.img, preloader and uncheck all others.
    4. Switch off your phone (Wait 1 min).
    5. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
    6. Click the Download option (present on the right of Firmware > Upgrade option) and SP Flash Tools will start looking for your phone.
    7. Connect your phone. SP Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
    8. After the process completes, a green ring will appear on your device signalling that the process was successful.
    9.Disconnect and turn on your phone.




    Credits

    @carliv
    @adrpat
    @yuweng
    @FSadino





    ALWAYS REMEMBER!!!
    I Will Not Be Responsible For Any Bricked Devices or Any Problem So Use It At Your Own Risk.

    XDA:DevDB Information
    Carliv Touch Recovery OLD 2.4 & NEW 2.7, Tool/Utility for the Micromax Canvas Turbo A250

    Contributors
    FSadino, @carliv, @adrpat, @yuweng
    Source Code: http://forum.xda-developers.com/android/development/guide-how-to-port-custom-cwm-based-t2970004


    Version Information
    Status: Stable

    Created 2015-02-09
    Last Updated 2015-02-11
    1
    Reserved

    F.A.Q.
    1
    Which base carliv-recovery you used? I think mine doesn't have touch

    use "CarlivTouch-recovery-2_4-1080x1920" its more stable

    ---------- Post added at 10:49 PM ---------- Previous post was at 10:21 PM ----------

    I noticed that already exists a final version a Carliv Touch Recovery v2.7 rebuilt from base (cwm 6.0.3.7)
    so here you have already compiled by me ;)

    DOWNLOAD

    you can use this kitchen to compile your way, just edit the res folder in ramdisk. use as sorce my recovery27 in the link above
    recalls that the result recovery can not pass 6 Mb
    Credits for Carliv (obvious...)
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone