[Recovery] ClockworkMod - TF701T Proxy Thread

[pershoot]

Recovery (cwm) can also do this for you (when you exit it will prompt you).

 

[zaelin]

I can't get my external SD card to mount, I have it formatted to fat32 through fat32format.exe, using latest version of the recovery from droid-basement, any ideas?


EDIT: Log
Checking for extendedcommand...
Skipping execution of extendedcommand, file not found...
Volume /storage/sdcard1 is not idle, current state is 2
Error mounting /storage/sdcard1!
Can't partition non mmcblk device: devices/platform/sdhci-tegra.2/mmc_host/mmc1

 

[pershoot]

I can't get my external SD card to mount, I have it formatted to fat32 through fat32format.exe, using latest version of the recovery from droid-basement, any ideas?


EDIT: Log
Checking for extendedcommand...
Skipping execution of extendedcommand, file not found...
Volume /storage/sdcard1 is not idle, current state is 2
Error mounting /storage/sdcard1!
Can't partition non mmcblk device: devices/platform/sdhci-tegra.2/mmc_host/mmc1

works fine here.

F:\>fat32format K:
Warning ALL data on drive 'K' will be lost irretrievably, are you sure
(y/n) :y
FSCTL_ALLOW_EXTENDED_DASD_IO OK
Size : 7GB 15515648 sectors
512 Bytes Per Sector, Cluster size 4096 bytes
Volume ID is 1ce1:d78
32 Reserved Sectors, 15123 Sectors per FAT, 2 fats
1935671 Total clusters
1935670 Free Clusters
Formatting drive K:...
Clearing out 30286 sectors for Reserved sectors, fats and root cluster...
Wrote 15506432 bytes in 2.09 seconds, 7.06 Megabytes/sec
Initialising reserved sectors and FATs...
Done

~ # mount | grep sdcard1
mount | grep sdcard1
/dev/block/vold/179:49 on /storage/sdcard1 type vfat (rw,dirsync,nosuid,nodev,no
exec,relatime,uid=1023,gid=1023,fmask=0007,dmask=0007,allow_utime=0020,codepage=
cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)

~ # ls /storage/sdcard1
ls /storage/sdcard1
LOST.DIR System Volume Information
~ #

 

[zaelin]

works fine here.

F:\>fat32format K:
Warning ALL data on drive 'K' will be lost irretrievably, are you sure
(y/n) :y
FSCTL_ALLOW_EXTENDED_DASD_IO OK
Size : 7GB 15515648 sectors
512 Bytes Per Sector, Cluster size 4096 bytes
Volume ID is 1ce1:d78
32 Reserved Sectors, 15123 Sectors per FAT, 2 fats
1935671 Total clusters
1935670 Free Clusters
Formatting drive K:...
Clearing out 30286 sectors for Reserved sectors, fats and root cluster...
Wrote 15506432 bytes in 2.09 seconds, 7.06 Megabytes/sec
Initialising reserved sectors and FATs...
Done

~ # mount | grep sdcard1
mount | grep sdcard1
/dev/block/vold/179:49 on /storage/sdcard1 type vfat (rw,dirsync,nosuid,nodev,no
exec,relatime,uid=1023,gid=1023,fmask=0007,dmask=0007,allow_utime=0020,codepage=
cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)

~ # ls /storage/sdcard1
ls /storage/sdcard1
LOST.DIR System Volume Information
~ #

Guess I'm going to try a different SD Card, odd thing is it works fine when the tablets booted, but CWM will not read it at all, ever.

EDIT: 2gb SD card by Sanyo works, whereas my faster 32gb Sanyo does not, is there a volume size limit?

 

[pershoot]

Guess I'm going to try a different SD Card, odd thing is it works fine when the tablets booted, but CWM will not read it at all, ever.

EDIT: 2gb SD card by Sanyo works, whereas my faster 32gb Sanyo does not, is there a volume size limit?

shouldn't be in that regard. unfortunately, i don't have a 32gb card that I can use to validate.

 

[pershoot]

recovery updated (kernel + sync'd with CM).

 

[pershoot]

recovery updated (kernel + sync'd with CM).

 

[Sleeepy2]

OK, I thought that I would update this as I haven't update the last few and now I am not doing something right I am not sure what.
I have done adb reboot bootloader and it has done the reboot.
At the top it says Starting Fastboot USB download protocol however fastboot devices doesn't show me anything.
I have tried unplugging are replugging the USB into different slots on my PC and I don't see any "driver" being install or recognized.
Do I have a PC driver issue or is my tablet not in the correct mode?

I have done this a few times before and for the life of me I don't remember doing anything different.
Little help please.

 

[YayYouFixedIt]

OK, I thought that I would update this as I haven't update the last few and now I am not doing something right I am not sure what.
I have done adb reboot bootloader and it has done the reboot.
At the top it says Starting Fastboot USB download protocol however fastboot devices doesn't show me anything.
I have tried unplugging are replugging the USB into different slots on my PC and I don't see any "driver" being install or recognized.
Do I have a PC driver issue or is my tablet not in the correct mode?

I have done this a few times before and for the life of me I don't remember doing anything different.
Little help please.

If your using linux unless you are user is allowed to accesss devices you need root if im not mistaken. ALso I found using a version from the sdk works better.

 

[Sleeepy2]

Nope, Work PC's are Windows (7 and XP)
I am pretty sure it is a driver issue.

 

[pershoot]

OK, I thought that I would update this as I haven't update the last few and now I am not doing something right I am not sure what.
I have done adb reboot bootloader and it has done the reboot.
At the top it says Starting Fastboot USB download protocol however fastboot devices doesn't show me anything.
I have tried unplugging are replugging the USB into different slots on my PC and I don't see any "driver" being install or recognized.
Do I have a PC driver issue or is my tablet not in the correct mode?

I have done this a few times before and for the life of me I don't remember doing anything different.
Little help please.

you have a driver issue.

use USBDeview to wipe drivers and reinstall.

 

[Sleeepy2]

Thanks all, I got it.
I think I had an old fastboot or something as redoing the drivers didn't work.
Downloaded a new fastboot and I am good.
Thanks again

 

[YayYouFixedIt]

I made a build of Philz touch advanced. But it has no touch. Im trying to contact Phil3759.
To see about touch being added? Or is it not happening yet?
I guess we still dont have touch in CWM yet?

 

[sbdags]

I made a build of Philz touch advanced. But it has no touch. Im trying to contact Phil3759.
To see about touch being added? Or is it not happening yet?
I guess we still dont have touch in CWM yet?

lj50036 made a version of TWRP but we had the same issue - no touch.......

 

[zaelin]

Is it because we lack drivers? You would think it would be simple to get basic touch support working in this era. I'm honestly not an expert at this though.

 

[pershoot]

Is it because we lack drivers? You would think it would be simple to get basic touch support working in this era. I'm honestly not an expert at this though.

a JNI stub is used to facilitate firmware load and calibrate for touch. this wouldnt be available in recovery.

when i get some time ill see about bundling it all in kernel space.

 

[pershoot]

this was updated yesterday (kernel).

 

[YayYouFixedIt]

Any tips toward getting the touch working? What sort of thing do we have to do. Any details? Ideas.

 

[pershoot]

shouldn't be in that regard. unfortunately, i don't have a 32gb card that I can use to validate.

confirmed working: 64GB card (SanDisk 'Ultra' 64gb microSDXC) with fat32 in latest recovery (DB) and latest nightly (CM).

 

[zaelin]

confirmed working: 64GB card (SanDisk 'Ultra' 64gb microSDXC) with fat32 in latest recovery (DB) and latest nightly (CM).

Nice, I'll have to give my 32th card another go. Keep it up pershoot!