[RECOVERY] ClockworkMod Touch 6.0.3.2 for GT-I9300

Search This thread

yyyqqq

Member
Nov 11, 2010
40
1
Hi. I can't seem to get this to work after following the steps on the first page.

I've installes USB drivers (KiesSetup), booted in download mode, installed Clockworkmod through Odin. The Odin report seems to be correct:

Code:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!! 
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!

When I'm booting in recovery mode it isn't Clockworkmod, but rather "Android system recovery <3e>". Any idea what I'm doing wrong? Thank you

same here! Any luck on that?
 

kramiel16

Member
Feb 28, 2012
43
6
ClockworkMod Touch Recovery 6.0.3.2 for Samsung Galaxy S3 *GSM* ONLY

This is the latest Touch Version from the ClockworkMod Site. I just packed it into a tar file so it can be flashed via Odin or Mobile Odin. Do not attempt to flash this image to the Snapdragon variant as it will not work.

DOWNLOAD LINK TO CWM 6.0.3.2 TOUCH

NOTE: CWM has the ability to 'choose backup format' to either the new .dup method with the blobs folder or the original .tar method where everything is in the date/time stamped folder. You can now ALSO 'create image zip' file from a NAND backup. Be patient with the zip backup option as it does take a while to create the zip (to be expected from a 1GB+ backup). Thank you for this addition koush it makes recovery alot more complete :)


Walkthrough video by TotallydubbedHD

How to Install ClockworkMod Touch

1. Download the attached tar file at the bottom of this post. DO NOT EXTRACT THIS FILE! If you end up with a recovery.img file then smack yourself and start again.
2. Download Odin (windows only) at the bottom if you don't already have it and unzip it to a folder on your PC
3. Reboot into Download Mode: Power off your device, Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
4. Plug your usb cable in
5. Start Odin (double click Odin3_v3.04.exe).
NOTE: When Odin opens you should see that the first box at the top under ID:COM should turn blue and 'Added' should appear in the message box in Odin.
6. Make sure 'Auto Reboot' and 'F.Reset Time' are ticked in Odin and nothing else.
7. Click on the 'PDA' button in Odin and browse to the recovery-cwmtouch-6.0.3.2-GTI9300.tar file that you downloaded.
8. Click on 'Start' to flash CWM to your phone.
NOTE: You can see whats happening in the message box in Odin. When the flash completes you should see 'RESET' in the top left the box and your phone will reboot.
9. You now have CWM Touch Recovery permanently flashed


How to Access ClockworkMod Touch

1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.

Stock Recovery being reflashed after a reboot?
There is an auto recovery restore system on stock roms that will reflash the Stock Recovery on a Stock Rom. If the restore files are renamed then CWM Recovery should not be overwritten after a reboot.

You need to be rooted and then delete or rename the following files:

You can then flash recovery without it being overwritten.

You can also do all this through the Galaxy S3 ToolKit ;)

**All credit goes to to Koush and anyone else responsible for ClockworkMod**

thank for this
 

Kumarankav

Senior Member
Mar 6, 2012
233
27
Chennai
I'm having trouble with connecting usb on pc.. my mobile is not getting recognized by windows., its only charging. tried many ways though. still i could not able to get it done. is there any way to flash cwm recovery without odin?
 

Full HD

Senior Member
Sep 23, 2010
517
284
near Hamburg

omdatura

Senior Member
Sep 11, 2012
51
19
Geneva
Frankly guys it would be really great to have a flashable zip as well as I have already wiped my phone when I realized I had to update my recovery from 6.0.3.1 to 6.0.3.2.
thx for ur great work anyway...
 

sunrainsky

Senior Member
Dec 23, 2011
114
19
I tried making a backup.
When I restored it, it ended up in a boot loop. Am I missing something here?

I created a backup using the usual method for cwm, big image file.
 

Awais Malik

Senior Member
Apr 8, 2013
55
7
I just login just to hit Thanks button

ClockworkMod Touch Recovery 6.0.3.2 for Samsung Galaxy S3 *GSM* ONLY

This is the latest Touch Version from the ClockworkMod Site. I just packed it into a tar file so it can be flashed via Odin or Mobile Odin. Do not attempt to flash this image to the Snapdragon variant as it will not work.

DOWNLOAD LINK TO CWM 6.0.3.2 TOUCH

NOTE: CWM has the ability to 'choose backup format' to either the new .dup method with the blobs folder or the original .tar method where everything is in the date/time stamped folder. You can now ALSO 'create image zip' file from a NAND backup. Be patient with the zip backup option as it does take a while to create the zip (to be expected from a 1GB+ backup). Thank you for this addition koush it makes recovery alot more complete :)


Walkthrough video by TotallydubbedHD

How to Install ClockworkMod Touch

1. Download the attached tar file at the bottom of this post. DO NOT EXTRACT THIS FILE! If you end up with a recovery.img file then smack yourself and start again.
2. Download Odin (windows only) at the bottom if you don't already have it and unzip it to a folder on your PC
3. Reboot into Download Mode: Power off your device, Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
4. Plug your usb cable in
5. Start Odin (double click Odin3_v3.04.exe).
NOTE: When Odin opens you should see that the first box at the top under ID:COM should turn blue and 'Added' should appear in the message box in Odin.
6. Make sure 'Auto Reboot' and 'F.Reset Time' are ticked in Odin and nothing else.
7. Click on the 'PDA' button in Odin and browse to the recovery-cwmtouch-6.0.3.2-GTI9300.tar file that you downloaded.
8. Click on 'Start' to flash CWM to your phone.
NOTE: You can see whats happening in the message box in Odin. When the flash completes you should see 'RESET' in the top left the box and your phone will reboot.
9. You now have CWM Touch Recovery permanently flashed


How to Access ClockworkMod Touch

1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.

Stock Recovery being reflashed after a reboot?
There is an auto recovery restore system on stock roms that will reflash the Stock Recovery on a Stock Rom. If the restore files are renamed then CWM Recovery should not be overwritten after a reboot.

You need to be rooted and then delete or rename the following files:

You can then flash recovery without it being overwritten.

You can also do all this through the Galaxy S3 ToolKit ;)

**All credit goes to to Koush and anyone else responsible for ClockworkMod**

Superb work....I was looking for decent method but couldn't find except this one.. Thank you... God Bless You.. keep it up :)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 516
    ClockworkMod Touch Recovery 6.0.3.2 for Samsung Galaxy S3 *GSM* ONLY

    This is the latest Touch Version from the ClockworkMod Site. I just packed it into a tar file so it can be flashed via Odin or Mobile Odin. Do not attempt to flash this image to the Snapdragon variant as it will not work.

    DOWNLOAD LINK TO CWM 6.0.3.2 TOUCH

    NOTE: CWM has the ability to 'choose backup format' to either the new .dup method with the blobs folder or the original .tar method where everything is in the date/time stamped folder. You can now ALSO 'create image zip' file from a NAND backup. Be patient with the zip backup option as it does take a while to create the zip (to be expected from a 1GB+ backup). Thank you for this addition koush it makes recovery alot more complete :)

    QUESTION: Why are the backups size soo small now compared to the previous cwm backups?
    ANSWER: Basically on the new cwm all the data is stored in a blobs folder in the clockworkmod folder. The backups folder now doesnt hold the actual data and instead the system and data files contain links to the files in the blobs folder (with the hash of the file as its filename). When you perform another backup only the changes have to be added so it performs incremental backups instead of full backups everytime. You can still flash different roms and back them up as any new data is stored in the blobs folder with the links in the backup folder. Several backups can share the same blobs file so over several backups the total file size of all the backups will be much much smaller. When you delete a backup via cwm you can then free space of the blob files that are no longer needed to keep everything tidy and make sure that no files are stored that arent referenced to any backup. If you don't free the space then any unused files will automatically be deleted when the next backup is performed.
    Walkthrough video by TotallydubbedHD

    How to Install ClockworkMod Touch

    1. Download the attached tar file at the bottom of this post. DO NOT EXTRACT THIS FILE! If you end up with a recovery.img file then smack yourself and start again.
    2. Download Odin (windows only) at the bottom if you don't already have it and unzip it to a folder on your PC
    3. Reboot into Download Mode: Power off your device, Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
    4. Plug your usb cable in
    5. Start Odin (double click Odin3_v3.04.exe).
    NOTE: When Odin opens you should see that the first box at the top under ID:COM should turn blue and 'Added' should appear in the message box in Odin.
    6. Make sure 'Auto Reboot' and 'F.Reset Time' are ticked in Odin and nothing else.
    7. Click on the 'PDA' button in Odin and browse to the recovery-cwmtouch-6.0.3.2-GTI9300.tar file that you downloaded.
    8. Click on 'Start' to flash CWM to your phone.
    NOTE: You can see whats happening in the message box in Odin. When the flash completes you should see 'RESET' in the top left the box and your phone will reboot.
    9. You now have CWM Touch Recovery permanently flashed


    How to Access ClockworkMod Touch

    1. Unplug the USB cable.
    2. Shut down the phone.
    3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.

    Stock Recovery being reflashed after a reboot?
    There is an auto recovery restore system on stock roms that will reflash the Stock Recovery on a Stock Rom. If the restore files are renamed then CWM Recovery should not be overwritten after a reboot.

    You need to be rooted and then delete or rename the following files:
    /system/recovery-from-boot.p
    /system/etc/install-recovery.sh
    You can then flash recovery without it being overwritten.

    You can also do all this through the Galaxy S3 ToolKit ;)

    **All credit goes to to Koush and anyone else responsible for ClockworkMod**
    12
    UPDATED CWM TOUCH RECOVERY IN OP TO 6.0.1.2

    NOTE: VERY NICE addition to 6.0.1.2 is the ability to 'choose backup format' to either the new .dup method with the blobs folder or the original .tar method where everything is in the date/time stamped folder. You can now ALSO 'create image zip' file from a NAND backup. Be patient with the zip backup option as it does take a while to create the zip (to be expected from a 1GB+ backup). Thank you for this addition koush it makes recovery alot more complete :)

    All credit to koush and the clockworkmod team for the recovery. I just created the tar to flash via Odin or Mobile Odin.

    Mark.
    10
    I've fixed the bug causing the external sd wipe, and will be doing a new build shortly.
    9
    Flashable zip, have at it. ;)
    8
    Investigating this now guys. Sorry for the trouble; **** happens when I don't actually have the device :(
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone