[RECOVERY] CWM-Based Recovery 6.0.3.2 for Xperia ZL (Stock Kernel) [20130516]

[DooMLoRD]

please sir i need it ....thanks in advanced

please upload stock .434 kernel and send me link

 

[shivindera]

Sorry for the delay... Was travelling getting back to hostel. Here is the link to the kernel (.434)

here

 

[DooMLoRD]

Sorry for the delay... Was travelling getting back to hostel. Here is the link to the kernel (.434)

here

thanks...

done updated kernel for firmware .434 posted in OP

enjoy!

 

[hyelton]

How Can I flash this without having to do ADB, NEVER learned it always had issues with it so gave up in the past. Is there no OTHER method?

EDIT: Got ADB working, But ONLY detects that the phone is connect with turned completely on with USB debugging on, WHen Phone is in Fastboot says no device but WINDOWS detects it!

 

[DooMLoRD]

How Can I flash this without having to do ADB, NEVER learned it always had issues with it so gave up in the past. Is there no OTHER method?

my fastboot toolbox is integrated into new FlashTool... it should be available from next release... it becomes a lot easier to flash kernels for those users who have NEVER used adb

 

[anirudh412]

How Can I flash this without having to do ADB, NEVER learned it always had issues with it so gave up in the past. Is there no OTHER method?

Is there any reason why you are SO averse to giving it another shot? Download latest flashtool, get ADB working and all thats left to do after that are a couple of commands. This was the first time I used ADB myself. And its really easy. At least these basic commands are

 

[hyelton]

Is there any reason why you are SO averse to giving it another shot? Download latest flashtool, get ADB working and all thats left to do after that are a couple of commands. This was the first time I used ADB myself. And its really easy. At least these basic commands are

Okay I got ADB working!!! BUT ONLY when the phone is on which is useless for me As It needs to work in fastboot mode. In fastboot mode ADB says no device

 

[shivindera]

Try this

Okay I got ADB working!!! BUT ONLY when the phone is on which is useless for me As It needs to work in fastboot mode. In fastboot mode ADB says no device

If I am not wrong, when in fastboot mode then only fastboot commands work like: "fastboot flash boot boot.img"

But, if you say adb works then, try downloading the latest beta flashtool and install it. Inside the install directory in the folder drivers run the setup, check the xperia z, fastboot and flashtool check boxes. Then it will install the correct drivers.

If you are on Win 8 then make sure you got the windows to boot in the mode where driver signature is disabled. Before you install the drivers

ALSO - When you use adb in cmd make sure you run cmd from the folder where adb.exe exists or put the "x10flasher_lib" folder present in the flashtool directory in the PATH variable of Windows Environment Variables!!!

I hope I could help :fingers-crossed:

 

[ATRIXXIRTA]

Okay I got ADB working!!! BUT ONLY when the phone is on which is useless for me As It needs to work in fastboot mode. In fastboot mode ADB says no device

Do you have usb debugging enabled?

Sent from my C6506 using Tapatalk 2

 

[ATRIXXIRTA]

Anyone have issues wiping cache within recovery? When I try, it just hangs there, and I have to reboot with the yellow button. It affects individual cache wipes, as well as factory resets. Just hangs at wiping cache.load screen. Dalvik cache, system, and data all wipe fine separately on there own. I tried downloading and flashing the customstock kernel, but I get the same result. Any Ideas?

Sent from my C6506 using Tapatalk 2

 

[apascual89]

Okay I got ADB working!!! BUT ONLY when the phone is on which is useless for me As It needs to work in fastboot mode. In fastboot mode ADB says no device

Like someone said earlier, ADB is for when the phone is on. When connected in fastboot, type: fastboot devices

You should see your phone connected

Sent from my C6506 using Tapatalk 2

 

[DooMLoRD]

updated recovery to CWM 6.0.3.0!


download links at first post!



cheers!

 

[butatx]

Everytime I flash rom or clear data it stuck at cwm or at sony logo for the 1st time, I have to reset (using small yellow button at the back) then enter recovery and flash again then it will work. I test this with KA07.

Anyone face this issue?

My device is C6502.


Sent from my C6503 using Tapatalk 2

 

[shivindera]

Everytime I flash rom or clear data it stuck at cwm or at sony logo for the 1st time, I have to reset (using small yellow button at the back) then enter recovery and flash again then it will work. I test this with KA07.

Anyone face this issue?

My device is C6502.


Sent from my C6503 using Tapatalk 2

this might not be fool proof but... try not to charge the phone while doing anything in Cwm... I faced the same problems but when it was on battery it worked without a glitch

Sent from my C6506 using xda app-developers app

 

[butatx]

this might not be fool proof but... try not to charge the phone while doing anything in Cwm... I faced the same problems but when it was on battery it worked without a glitch

Sent from my C6506 using xda app-developers app

I only once flashing rom while charging and it stuck at sony logo. Then after several day I clear data and it stuck there, I reset then just flashing rom, then it work fine but my data still not clear.


Sent from my BlackBerry 9900 using Tapatalk

 

[inneyeseakay]

Anyone have issues wiping cache within recovery? When I try, it just hangs there, and I have to reboot with the yellow button. It affects individual cache wipes, as well as factory resets. Just hangs at wiping cache.load screen. Dalvik cache, system, and data all wipe fine separately on there own. I tried downloading and flashing the customstock kernel, but I get the same result. Any Ideas?

Sent from my C6506 using Tapatalk 2

I'm having the same issue... :/ Any fix?

EDIT: According to thread in the XZ section... it just takes forever to wipe/format cache... Going to format and leave it sitting for ~5 minutes and see if it ever goes through.

---------- Post added at 01:02 PM ---------- Previous post was at 12:37 PM ----------

It's been 6 minutes... and it's still "Formatting /cache..."

---------- Post added at 01:11 PM ---------- Previous post was at 01:02 PM ----------

After 10 minutes, I reset with the yellow button and tried again, this time without the charger plugged in. Format completed after a few minutes.... Moral of the story... be VERY patient when wiping cache... lol

Edit: It may be worth mentioning that I seem to have more success with the Format /cache option under Mounts/Storage than I do with the Wipe Cache option from the main menu... IDK if there's any difference, but the wipe cache option tends to hang where as the Format /cache option doesn't do it nearly as often... ???

 

[bullghost]

I'm having the same issue... :/ Any fix?

EDIT: According to thread in the XZ section... it just takes forever to wipe/format cache... Going to format and leave it sitting for ~5 minutes and see if it ever goes through.

---------- Post added at 01:02 PM ---------- Previous post was at 12:37 PM ----------

It's been 6 minutes... and it's still "Formatting /cache..."

---------- Post added at 01:11 PM ---------- Previous post was at 01:02 PM ----------

After 10 minutes, I reset with the yellow button and tried again, this time without the charger plugged in. Format completed after a few minutes.... Moral of the story... be VERY patient when wiping cache... lol

Edit: It may be worth mentioning that I seem to have more success with the Format /cache option under Mounts/Storage than I do with the Wipe Cache option from the main menu... IDK if there's any difference, but the wipe cache option tends to hang where as the Format /cache option doesn't do it nearly as often... ???

yeah i have same issue , it should be not too long for just format the partition, maybe clear cache in CWM still not support on our phone, the second time you entering cwm it fail to identify the cache partition so it just finish, and booting on starting the system will repair the corrupt partition by storing the alternatif partition, you can see the logcat what system done it

 

[DooMLoRD]

i need newest kernel.sin from the 10.1.1.A.1.253 firmware so that i can update this kernel...

 

[Kylez]

i need newest kernel.sin from the 10.1.1.A.1.253 firmware so that i can update this kernel...

here http://www.mediafire.com/?vw1z6bj0hszc6r6

 

[DooMLoRD]

Advanced Stock Kernel v04 released!



Changelog:

1. updated to stock firmware 10.1.1.A.1.253 kernel
2. fixed LED while in recovery
3. updated to latest CWM 6.0.3.2! with patches upto May 13, 2013

PLEASE DO TEST OUT and let me know!


Download link at first post!


enjoy!