[RECOVERY] CWM-based Recovery v6.0.5.1 for Yureka and ROOT

vishal_android freak

Inactive Recognized Developer / Recognized Contrib
Dec 30, 2012
1,898
5,637
0
Mumbai
I am not good at writing bigggg threads. So let's get straight to the point.

CWM v6.0.5.1 for YU Yureka


Please note: You need to unlock your bootloader to flash this.

1.)Unlocking Bootloader:

1.) Power Down the device.
2.) Attach USB cable to your pc and then to your device. The LED near the speaker at the top goes red.
3.) As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
4.)Now type in terminal:

Code:
fastboot -i 0x1ebf oem unlock
5.)This may delete all your data including the internal memory. Your bootloader is now unlocked.
6.) Now type this in terminal:

Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
7.) Done! Press vol up+ vol down + power button to boot into recovery. Flash SuperSu zip from here and attain root :D


What's working:
-flashing zips
-internal memory detected
-backup is successfully done.


What's not working:

I didn't get time to test much. You tell me



Kernel Sources: here


Downloads: recovery-yu.img
 

Attachments

Last edited:

sooorajjj

Senior Member
Feb 22, 2013
414
564
133
Cochin
Why ?

It's not the same hardware ? same CPU Snapdragon 615, same memory, same camera, etc ... ?

Regards
Mar
fetch kernel from coolpad f2 then unpack recovery img and replace kernel and repack hopefully it will wrk same goes with roms replace kernel
dont try without replacing kernel
or if u could build it yourserlf here is device specific sources https://github.com/YUPlayGod
this is exact clone of coolpad f2 and the sources have been fetched from coolpad f2 device tree
https://github.com/YUPlayGod/androi...mmit/06504ddcc2cfa19e6a06fca0abc7f1856244fd83
loooooooooooooool
cp8675 was the codename for coolpad f2 which was renamed to yureka later o_O
https://github.com/YUPlayGod/android_device_yu_tomato/commits/cm-11.0?page=7
 
Last edited:
  • Like
Reactions: SujithZis

jerdog

Admin Emeritus - Purveyor of word nuggets
May 17, 2007
8,169
7,154
253
Gallifrey
I am not good at writing bigggg threads. So let's get straight to the point.

CWM v6.0.5.1 for YU Yureka


Please note: You need to unlock your bootloader to flash this.

1.)Unlocking Bootloader:

1.) Power Down the device.
2.) Attach USB cable to your pc and then to your device. The LED near the speaker at the top goes red.
3.) As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
4.)Now type in terminal:

Code:
fastboot -i 0x1ebf oem unlock
5.)This may delete all your data including the internal memory. Your bootloader is now unlocked.
6.) Now type this in terminal:

Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
7.) Done! Press vol up+ vol down + power button to boot into recovery. Flash SuperSu zip from here and attain root :D


What's working:
-flashing zips
-internal memory detected
-backup is successfully done.


What's not working:

I didn't get time to test much. You tell me


Downloads: recovery-yu.img


Please provide link to the kernel source you used, or note which kernel is used.
 
  • Like
Reactions: sooorajjj

mslr

Member
Jan 23, 2006
49
3
8
fetch kernel from coolpad f2 then unpack recovery img and replace kernel and repack hopefully it will wrk same goes with roms replace kernel
dont try without replacing kernel
or if u could build it yourserlf here is device specific sources https://github.com/YUPlayGod
this is exact clone of coolpad f2 and the sources have been fetched from coolpad f2 device tree
https://github.com/YUPlayGod/androi...mmit/06504ddcc2cfa19e6a06fca0abc7f1856244fd83
loooooooooooooool
cp8675 was the codename for coolpad f2 which was renamed to yureka later o_O
https://github.com/YUPlayGod/android_device_yu_tomato/commits/cm-11.0?page=7

It's seen a little complicated for me, maybe with more information ?

I have a custom recovery TWRP Coolpad_8675_W00_Recovery

and i have two rom the official ota_full_040_P1_signed.zip and the custom Lollypop_Rom_coolpad_F2_w00.zip

maybe with this and a Yureka rom i can made a rom for coolpad but how ?

Regards
Marc
 

J2A9

Senior Member
Feb 14, 2012
94
19
0
i tried this but it stands at waitinng for device for a long time .. its not detecting mine as a fastboot device
pls help
 

aashking

Senior Member
Apr 8, 2014
151
150
0
Bangalore
I am not good at writing bigggg threads. So let's get straight to the point.

CWM v6.0.5.1 for YU Yureka


Please note: You need to unlock your bootloader to flash this.

1.)Unlocking Bootloader:

1.) Power Down the device.
2.) Attach USB cable to your pc and then to your device. The LED near the speaker at the top goes red.
3.) As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
4.)Now type in terminal:

Code:
fastboot -i 0x1ebf oem unlock
5.)This may delete all your data including the internal memory. Your bootloader is now unlocked.
6.) Now type this in terminal:

Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
7.) Done! Press vol up+ vol down + power button to boot into recovery. Flash SuperSu zip from here and attain root :D


What's working:
-flashing zips
-internal memory detected
-backup is successfully done.


What's not working:

I didn't get time to test much. You tell me



Kernel Sources: here


Downloads: recovery-yu.img

@vishal_android freak Do we need some software installed in PC to connect our phone??? Because, how to use a fastboot command without any drivers???
 

J2A9

Senior Member
Feb 14, 2012
94
19
0
is there any way to check the botloader status .. i flashed the recovery successfully .. but i am not sure wethere my bootloader got properly unlocked.. so is there a way to check it
 

vishal_android freak

Inactive Recognized Developer / Recognized Contrib
Dec 30, 2012
1,898
5,637
0
Mumbai
i tried this but it stands at waitinng for device for a long time .. its not detecting mine as a fastboot device
pls help
@vishal_android freak Do we need some software installed in PC to connect our phone??? Because, how to use a fastboot command without any drivers???
You need to add the vendor id. Without that it won't get detected. If you want to check if device is connected in fastboot, type in terminal:

Code:
 fastboot -i 0x1ebf devices
Without "0x1ebf" it won't detect the device. Security measures ;) Just follow steps in the first post :)
 

J2A9

Senior Member
Feb 14, 2012
94
19
0
thank you dude .. so i successfully did it ...this link also helped me
http://www.informationlord.com/unlock-bootloader-micromax-yu/

---------- Post added at 11:05 AM ---------- Previous post was at 11:02 AM ----------

so nw i got the device. its bootloader unlocked , cwm flashed and rooted.. i dont know any coding or rom development.. but if someone here has time.. pls give me a guide .. i will help you with my device.
 

jon55

Member
Mar 31, 2010
48
11
28
You can upload backup cwm for which we coolpad?
I can retrieve the software if Brick.
If you want to send me the link for private and if it works I put it here.
Thanks for everything guys.
 
Last edited:

vishal_android freak

Inactive Recognized Developer / Recognized Contrib
Dec 30, 2012
1,898
5,637
0
Mumbai
thank you dude .. so i successfully did it ...this link also helped me
http://www.informationlord.com/unlock-bootloader-micromax-yu/

---------- Post added at 11:05 AM ---------- Previous post was at 11:02 AM ----------

so nw i got the device. its bootloader unlocked , cwm flashed and rooted.. i dont know any coding or rom development.. but if someone here has time.. pls give me a guide .. i will help you with my device.
That link itself is based on this. Anyways, I have compiled cm11 for personal use. It's of no use making an altogether different thread for it because you are already running cyanogen :p