[RECOVERY][dory] TWRP 3.0.0-0 With Squashfs Support

Search This thread

Jaocagomez

Senior Member
Sep 4, 2010
1,042
822
Mexico Culiacan
I DIDN'T DO THIS
Thanks to @TheDevFreak for the download link
I put it here so we can find it faster.


Here's the TWRP 3.0 version that supports SquashFS filesystem to avoid the error
Code:
NO OS INSTALLED
bootlooping when flashing Wear 2.0 ROM

Download:
-attached to this post-
http://www.mediafire.com/file/apwtscp0tn0y8qd/twrp-3.0.0-0-dory+squashfs.img
https://mega.nz/#!AB9BnBjC!GRVW_eLtPRezC_Jxvw9-FBn80meeZkXRemdUfukZmpE


flash it on fastboot
Code:
Fastboot flash recovery twrp-3.0.0-0-dory+squashfs.img
 

Attachments

  • twrp-3.0.0-0-dory+squashfs.img.zip
    10.1 MB · Views: 2,156
  • Like
Reactions: Nezorflame

ovitz

Senior Member
Feb 12, 2010
371
77
Bielsko-Biala
www.pdaclub.pl
I have permanent bootloop. I've already flashed my LG G Watch few times and still no luck. Do you have any advice how to boot?

[edit]
If you have permanent bootloop after factory reset of AW2, you have to reflash your watch with Mysterious Magic than update to 6.0.1 with OTA and then reflash to AW2.
 
Last edited:

Sam Nakamura

Retired Forum Moderator
Is it safe to try to root AW 2.0 with this version of TWRP? I only want to root in order to increase the vibration time for notifications.
Yeah, it flashes latest magisk (even beta) just fine...
You can adb install kernel adiutor to regulate vibration

You theoretically could also use SuperSU in systemless mode, imported is that changes to system won't work as the system file system (squashfs) is read only, it cannot be modified but this does not matter with systemless solutions like magisk as it only patches the kernel (hence systemless)


Sent from my OnePlus 3T using XDA Labs
 
Last edited:

ShapeShifter499

Senior Member
Sep 13, 2009
469
158
Yeah, it flashes latest magisk (even beta) just fine...
You can adb install kernel adiutor to regulate vibration

You theoretically could also use SuperSU in systemless mode, imported is that changes to system won't work as the system file system (squashfs) is read only, it cannot be modified but this does not matter with systemless solutions like magisk as it only patches the kernel (hence systemless)


Sent from my OnePlus 3T using XDA Labs

I'll try running magisk. I didn't even think magisk would work on AW. Also thanks for pointing out kernel adiutor.
 

ShapeShifter499

Senior Member
Sep 13, 2009
469
158
Yeah, it flashes latest magisk (even beta) just fine...
You can adb install kernel adiutor to regulate vibration

You theoretically could also use SuperSU in systemless mode, imported is that changes to system won't work as the system file system (squashfs) is read only, it cannot be modified but this does not matter with systemless solutions like magisk as it only patches the kernel (hence systemless)


Sent from my OnePlus 3T using XDA Labs

which version of adiutor are you using, it displays much to big to navigate anything
 

Sam Nakamura

Retired Forum Moderator
which version of adiutor are you using, it displays much to big to navigate anything
You'll need to set a custom screen density
Code:
adb shell vm density 180
Default density is 240p, you can play a little what suits you best but I'm comfortable with 180 and all apps so far ran flawlessly, this command will keep the custom screen resolution across reboots, keep this in mind but as long as you can boot to bootloader you can change this to default or your liking, of course you'll need to reboot to take effect (in case you just use adb while watch is booted)

Sent from my OnePlus 3T using XDA Labs
 

DocMAX

Senior Member
Nov 22, 2006
676
28
after selecting system reset to pair with another phone i'm stuck in a boot loop, where i get to twrp recovery no matter what i do. any idea what to do? thanks.
 

Top Liked Posts