[Recovery][EMUI 8.x][Honor 9 Lite][Unofficial]TWRP 3.2.1-0 [12/05/2018]

Search This thread
By:
Advanced…
-Alf-

-Alf-

Senior Member
Sep 28, 2017
2,220
743
Huawei P9 Lite
Huawei P10 Lite
LouisN39 said:
C:\Users\Nikit\Downloads\ADB>adb reboot-bootloader

C:\Users\Nikit\Downloads\ADB>fastboot oem unlock *****
...
FAILED (remote: already fastboot unlocked)
finished. total time: 0.031s

C:\Users\Nikit\Downloads\ADB>fastboot flash system los.img
target reported max download size of 471859200 bytes
sending sparse 'system' (458752 KB)...
OKAY [ 16.162s]
writing 'system'...
FAILED (remote: sparse flash write failure)
finished. total time: 16.474s

The gsi i use is https://forum.xda-developers.com/t/gsi-11-lineageos-18-x-gsi-all-archs.4205461/
and i also tried with the openkirin images
Click to expand...
Click to collapse
-
-Alf- said:
OEM unlock enabled?
Click to expand...
Click to collapse
- What is your build number ?
- Try to flash GSI using "Minimal ADB and fastboot" .
P.S.: sorry, I'm out of ideas, personally didn't faced a problem like this...
 
R

ROO3VER

Senior Member
Feb 12, 2015
254
163
Antwerp
LouisN39 said:
my build number is 9.1.0.168(C432E8R1P4) and oem unlock enabled i'll try with minimal adb and fastboot
Click to expand...
Click to collapse
It's been a while since i flashed anything on my H9L and i stil have the EMUI 8 vendor. I don't know whitch type of gsi you downloaded and tried to flash but i remember reading "somewhere" in the treble a and a/b section ( forgive me for not remebering the exact thread) that starting from an android 9 stock rom a-only devices requier an a/b gsi. Someone please correct me if i'm wrong.
 
  • Like
Reactions: LouisN39
LouisN39

LouisN39

Member
May 26, 2018
38
5
17
Samsung Galaxy S9
ROO3VER said:
It's been a while since i flashed anything on my H9L and i stil have the EMUI 8 vendor. I don't know whitch type of gsi you downloaded and tried to flash but i remember reading "somewhere" in the treble a and a/b section ( forgive me for not remebering the exact thread) that starting from an android 9 stock rom a-only devices requier an a/b gsi. Someone please correct me if i'm wrong.
Click to expand...
Click to collapse

This is the gsi i had downloaded:
forum.xda-developers.com

[DISCONTINUED][GSI][11] LineageOS 18.x GSI (all archs)

Background: This is a natural continuation/extension of the LineageOS 17.x GSIs I've been making since November 2019. LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance...
forum.xda-developers.com forum.xda-developers.com
 
R

ROO3VER

Senior Member
Feb 12, 2015
254
163
Antwerp
LouisN39 said:
This is the gsi i had downloaded:
forum.xda-developers.com

[DISCONTINUED][GSI][11] LineageOS 18.x GSI (all archs)

Background: This is a natural continuation/extension of the LineageOS 17.x GSIs I've been making since November 2019. LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance...
forum.xda-developers.com forum.xda-developers.com
Click to expand...
Click to collapse
LouisN39 said:
This is the gsi i had downloaded:
forum.xda-developers.com

[DISCONTINUED][GSI][11] LineageOS 18.x GSI (all archs)

Background: This is a natural continuation/extension of the LineageOS 17.x GSIs I've been making since November 2019. LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance...
forum.xda-developers.com forum.xda-developers.com
Click to expand...
Click to collapse
I don't know witch variant you tried to flash, our device is a-only but i remember to have red that coming from EMUI 9 you should use an a/b gsi.
 
R

ROO3VER

Senior Member
Feb 12, 2015
254
163
Antwerp
LouisN39 said:
nvm i found the problem i just downloaded the wrong (i downloaded the Arm32 a/b version cuz i havent looked for what i downloaded) thanks for helping me
Click to expand...
Click to collapse

No problem, happy to have helped.
Hope you get it fixed.

Btw just found the post i mentioned before:

forum.xda-developers.com

[AOSP 9.0] [2019-08-25] Phh-Treble

WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution! The goal of this ROM is to provide maximum hardware compatibility inside a Generic System Image. No feature will be added. This will...
forum.xda-developers.com forum.xda-developers.com
 
Last edited:
LouisN39

LouisN39

Member
May 26, 2018
38
5
17
Samsung Galaxy S9
-Alf- said:
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
and post the results.
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem get-build-number
...
(bootloader) :LLD-L31 9.1.0.168(C432E8R1P4)
OKAY [ 0.016s]
finished. total time: 0.016s

C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem get-product-model
...
(bootloader) LLD-L31
OKAY [ 0.016s]
finished. total time: 0.016s

C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar vendorcountry
vendorcountry: hw/eu
finished. total time: 0.011s
 
-Alf-

-Alf-

Senior Member
Sep 28, 2017
2,220
743
Huawei P9 Lite
Huawei P10 Lite
Last edited:
  • Like
Reactions: ROO3VER
LouisN39

LouisN39

Member
May 26, 2018
38
5
17
Samsung Galaxy S9
-Alf- said:
Flash it simply in fastboot mode.

IMPORTANT! Before booting up the ROM, you will need to perform a factory reset in stock recovery!

- Extract the system.img file from the compressed package
- Flash extracted system.img in fastboot , use command
fastboot flash system (file_name).img
- Run command fastboot reboot, unplug your phone, when yellow warning appears on the screen , press and hold for 3 sec Volume Up . In eRecovery select 'Wipe data/factory reset'.
- Reboot .
Click to expand...
Click to collapse
do i need to wipe something BEFORE flashing system ?
 
R

ROO3VER

Senior Member
Feb 12, 2015
254
163
Antwerp
-Alf- said:
Bro right now I tried latest AndyYan's build ,
https://sourceforge.net/projects/an...8-UNOFFICIAL-treble_arm64_bvS.img.xz/download
works like charme on my P20 lite 9.1.0.132, it should work on LLD-L31 too.
Try total clean flash - if you have BL unlock code, flash service ROM, for example this one via dload method, then unlock BL and try again , in fastboot mode.
(No TWRP, no Magisk, no Permissiver ,no custom Kernel etc.).
Click to expand...
Click to collapse
So if i was planning on flashing a GSI anytime soon would it be preferable to upgrade to EMUI 9.1 first instead of staying on the EMUI 8 vendor i'm stil on right now?
Are there any (dis)advantages to either one?
I'm asking because i was under the impression that no to long ago GSI's weren't working to wel on a EMUI 9 vendor.
 
You must log in or register to reply here.

Similar threads

H
Kangvip Rom [EMUI 8.0] Honor 9 Lite
Replies
57
Views
27K
K
KBEERR
K
Honor 9 lite Pixel Experience 9.0 GSI Working
Replies
54
Views
26K
T
TheKohinoor
VigneshS007
[Stock ROM][8.0.0.191]Indian Firmware C675 [Unbrick][LLD-AL10]
Replies
114
Views
38K
EPT-3
EPT-3
AndropaX
[ROM][UNOFFICIAL][leland][8.1] LineageOS 15.1
Replies
170
Views
50K
Z
zpk787
Ramyski
[ROM][UNOFFICIAL][9.0]CypherOS 7.0[Honor 9 Lite]
Replies
49
Views
17K
O
OrigamiOfficial

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 29
    Pretoriano80
    Pretoriano80
    Disclaimer​
    This software comes wth no warranty,XDA staff ,myself or TeamWin stuff can't be hold responsible for any damage it may cause to your device.

    Note: Currently Oreo 8.1 custom roms are not supported,only stock EMUI 8.x .

    Download and Installation​

    * Download twrp recovery
    * Start your device in fastboot mode
    * Install the recovery using the following command:
    Code: 
    fastboot flash recovery_ramdisk [filename].img --> ex: fastboot flash recovery_ramdisk twrp_honor9_lite_0.1.img
    * Restart with this command:
    Code: 
    fastboot reboot
    * As soon as you execute the restart command,remove the USB cable and keep pressing Volume UP,so the device will boot to TWRP.This is to avoid that the device boot to OS,overwritting TWRP recovery.

    Features​

    Internal storage decryption = working
    MTP and OTG connection = working
    Backup&Restore = working

    Note: There are no sources for this yet,because is based on the work of @zxz0O0 ,from Honor 9.

    Contributors
    **** Pretoriano80
    **** zxz0O0 - This wouldn't be possible without this guy,so big big thank to him.I used his base to make this recovery work.Thank again buddy!
    **** TeamWin project ,obviously.
    **** @Blackball
    **** @JamesBott - for testing on Honor 9 Lite
    **** Team OpenKirin - thanks for the "Oem Path wipe esclusion" code
    **** Anyone that somehow contributed to this project

    Download links
    twrp_honor9_lite_0.1.img - initial release
    twrp_honor9_lite_0.2_test.img - test build ,possible fix for unencrypted devices (stock or custom roms).
    View
    2
    D
    Darkest-Dark
    Sparkrite said:
    Hi,does anybody have the stock boot.img for the LLD-L31 Please?
    Click to expand...
    Click to collapse

    Sure.
    View
    2
    hackintosh5
    hackintosh5
    AzimNasri said:
    can 9 lite LLD-L21(636) use this TWRP 3.2.1-0.. thanks
    Click to expand...
    Click to collapse
    Why don't you ACTUALLY READ?!?!?
    View
    2
    Pretoriano80
    Pretoriano80
    Psytroniks said:
    Well, or i havent find it yet. With firmware Finder are a few That says are aloud to my modelo but i got error once it downloaded and the Phone restar and star to install it al the time in 6%
    Click to expand...
    Click to collapse
    You are mixing things so you better stop and educate yourself a bit on how TWRP, Firmware Finder and Stock Roms work... before you do some damage.
    If you want to use Firmware Finder to install approved firmwares, then you don't have to install TWRP, you need to stay with stock,otherwise firmwares will not install.
    The other way is, like i already said, with HuRUpdater, which works with TWRP and doesn't require an approved firmware.
    View
    2
    vayavalla
    vayavalla
    prem222 said:
    Just flashed the v1 ,got stuck on teamwin logo.
    When I try to reboot to bootloader ( adb reboot bootloader ) it get me back to TWRP and teamwin logo again.
    What to do ?
    ok, got it
    Click to expand...
    Click to collapse
    What do you get if you reboot, connected to a PC and vol - pressed?

    Enviado desde mi LLD-L31 mediante Tapatalk
    View

New posts