[Recovery] EVA NoCheck Recovery - Flash unapproved OTA firmwares!
- Thread starter Atarii
- Start date
I've added an EVA L29 nocheck recovery here, based on b391: https://forum.xda-developers.com/devdb/project/dl/?id=28173 - if you could test it please I'll add it to the front page
Thank you very much for your work!I've added an EVA L29 nocheck recovery here, based on b391: https://forum.xda-developers.com/devdb/project/dl/?id=28173 - if you could test it please I'll add it to the front page
I can't test it by myself, cause I own L09, but I made zips with your Recovery for L19 and L09 (for people who are using my Rom to go back to Stock or upgrade first..)
https://forum.xda-developers.com/showpost.php?p=74913874&postcount=3
I can upload one declared Testversion for L29 in my Post there.
Soon someone tested it and reported to me I will share.
But perhaps some other User would test it in the meantime directly from here
Thanks for this great recovery. I update to EVA-L09C432B397. Magisk v15.3 work to with this ROM
Keep up this good work
May you can do it also for Vie-L29 for P9 plus?
This would be very helpful
thank you
May you can do it also for Vie-L29 for P9 plus?
This would be very helpful
thank you
Every time I want to update to a newer version do I need to repeat the steps?
Or I can directly install new updates from finder without confirmation?
Or I can directly install new updates from finder without confirmation?
If you use not authorized update you must do it every thing that same as op write.
If you ask why???
It's because when you flash new firmware it's change no check recovery to stock recovery and you can't use this method any more
ok man thanx alo0ot i well do method before any new update
But you must have no check recovery for vie-l29.ok i well try for Vie-L29 for P9 plus
This it's for Eva-L09/L19
You can try but if not work you have soft brick and your phone go to erecovery
I would NOT try - this is only for EVA not for VIEok i well try for Vie-L29 for P9 plus
But there is someone who has tried on plus. See here in post #8
https://forum.xda-developers.com/p9-plus/how-to/easy-upgrade-to-unapproved-emui-5-update-t3649532
https://forum.xda-developers.com/p9-plus/how-to/easy-upgrade-to-unapproved-emui-5-update-t3649532
I think you can /should add your L29 recovery to the front page -I've added an EVA L29 nocheck recovery here, based on b391: https://forum.xda-developers.com/devdb/project/dl/?id=28173 - if you could test it please I'll add it to the front page
because it works also for the P9 PLUS!
And same with your L09 and L19 recovery - Users in the P9 Plus (VIE) have tested! :good:
https://forum.xda-developers.com/showpost.php?p=75388885&postcount=23
Last edited:
M
mkoijnbhu
Guest
Hi bro may you make patched recovery for my phone too???Overview
This is a patched recovery image which bypasses the usual checks performed during a firmware flash, allowing you to flash unapproved OTA firmwares. For example, the latest FullOTA-MF b394:
You can also downgrade without using the b300 rollback package (untested)
Prerequisites
Unlocked bootloader
Rooted
Backup your data (flashing may cause bootloader to re-lock or restore factory default etc. - don't blame me if it goes wrong!)
Instructions
Download firmware:
Use Huawei Firmware Finder (Play Store link) to download the latest firmware files - you will need all 3 zip files:
- update.zip
- update_data_full_public.zip
- update_full_EVA-L09_hw_eu.zip
Tips: check for the latest number (102064 for b394) and ensure you have the larger filesize (around 2GB). For example, these are the latest at time of writing b394:
Flash nocheck recovery:
Download from here - EVA L09: eva_l09b391_nocheckrecovery.img, EVA L19: eva_l19b391_nocheckrecovery.img, EVA L29: eva_l29b391_nocheckrecovery.img
Reboot device to fastboot mode (power off fully, hold down volume button and connect USB cable)
Run the following to flash recovery:
Send commands via ADB
Phone should be booted back to system - connect phone via adb and allow root prompt:
Create HWOTA folder:
mkdir /data/update/HWOTA
Copy firmware to HWOTA folder (replace 102064 below with correct value - this is for b394):
Copy firmware to HWOTA folder (replace 102064 below with correct value - this is for b394):
cp /sdcard/HWFF/102064/update* /data/update/HWOTA/
Paste recovery command:
Finally reboot to recovery to start firmware upgrade:
Firmware should install and reboot automatically
Extras
You can probably Re-Brand to alternative customers too i.e. c636 (Asian region) to c432 (European region). Follow the tutorial here: https://forum.xda-developers.com/honor-8-pro/how-to/oeminfo-c432-t3625886 - you'll need the correct OEMINFO files, this is untested.
If this has helped you out and you want to show support please click here: https://paypal.me/sendpennies
Thanks
- Olddroid
- Mankindtw
- Hackslash
- DkiOnline (L09 tester)
- jimz6 (L19 tester)
- LastStandingDroid
XDA:DevDB Information
EVA NoCheck Recovery, Tool/Utility for the Huawei P9
Contributors
Atarii
Version Information
Status: Stable
Created 2017-11-14
Last Updated 2017-11-17
I dont have p9 i have honor 8 lite
Hi! I have a dude
I want flash the L19C432B360... this image file will work out?? Is the same process?
I want flash the L19C432B360... this image file will work out?? Is the same process?
Which Firmware is the current one you have installed?
Upgrade is working in any case (for you with L19 Recovery from OP and exactly the steps)
Downgrade I haven't tested yet.
Currently I have the EVA-L19C900B168
I want to change to EU region, I mean the C432
I tried this methood but dind't work, I have troubles to understand what have to do in "Paste recovery command"... I execute the comands like you post but didn't work
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone