Can I just flash the .img using ian`s twrp since that I currently on it to make yours as the boot?
[RECOVERY][EXYNOS] TWRP 3.4.0-0 for S10e|S10|S10+ (UPDATE: 2020-06-12)
- Thread starter modpunk
- Start date
You can flash the image to recovery slot with every twrp recovery. Or use flashify ro the twrp app.
When I check the integrity, I get:
Should that be the output?
Should that be the output?
Attachments
Last edited:
I think I got a problem, I'm stuck at teamwin logo when press vol down + power button it restarts and I get stuck again.
Since it auto boots into recovery and gets stuck in the logo I don't know how to get into Download Mode.
Anyone has any tips?
Since it auto boots into recovery and gets stuck in the logo I don't know how to get into Download Mode.
Anyone has any tips?
Power off, vol- + Bixby + plug in your USB cable from your computer
The thing is I can't power off my device. If I hold the power button it does nothing. If I press vol down + power button it restarts my phone.
I guess my only option right now is to let the battery drain and hopefully that way I will be able to go into download mode
When you restart you phone you have to be quick, still hold vol-, press bixby and plug in usb
I Know but the warning confused me, thanks for clearing this up.It says "Good Signature"
Hey Everyone,
i dont really got how to Integrety works..... Can someone explain me? i also checked the Tor Link ... but still same knowledge to be honest..
Mod edit: "hide tags added"
i dont really got how to Integrety works..... Can someone explain me? i also checked the Tor Link ... but still same knowledge to be honest..
Mod edit: "hide tags added"
Last edited by a moderator:
i this this steps
To flash modpunk's TWRP and vbmeta on S10e SM-970F Exynos international version, you need to:
1) Download the latest TWRP here.
2) Download vbmeta disabled image here.
3) Extract twrp-3.3.1-0-android-10.0-beyond0lte-5.img from the twrp-3.3.1-0-android-10.0-beyond0lte-5.img.xz with 7zip to fx. Desktop. 7zip can be found here.
4) Rename twrp-3.3.1-0-android-10.0-beyond0lte-5.img to recovery.img.
5) Rename vbmeta-disabled.img to vbmeta.img.
6) Place vbmeta.img in same place as recovery.img.
7) Open 7zip, and navigate to where vbmeta.img and recovery.img is placed.
8) Archieve vbmeta.img and recovery.img in one arhieve of .tar format (fx. TWRP.tar), and use "Compression level": Store.
9) Turn of your device
10) Press and hold the volume down and bixby (Not power!), and keep holding it, while connecting the USB cable between phone and PC.
11) When the download mode warning screen appear, release all buttons, and follow the instructions on the download mode warning screen.
12) Open up Odin3 v3.13.1 as admin, and you should se a message saying "Added" in the log, and a blue flag above ID:COM, together with a port number. Odin can be found here, or direct link here.
13) Press on AP in Odin, and navigate to where TWRP.tar is placed, and select it, so AP becomes checked, and the path to TWRP.tar is viewable in the AP slot.
14) Navigate to options in Odin, and make sure that "Auto Reboot" is NOT selected, and navigate back to the Log tab.
15) Press start to flash TWRP.tar.
16) When a success message is stated in the log, then exit download mode by pressing volume down and power.
17) When the screen turns of, you need to immediately press the recovery combo (VolumeUp, Bixby and Power), and keep holding it, until the secondary warning appears (The one with warning about unlocked bootloader), then release Bixby and Power, but keep holding volume up, until the TWRP logo is seen.
the phone is looping, how i go to the recovery ? PLEASE HELP
EDIT: i flash this one twrp-beyond2lte-3.4.0-3_ianmacd.img and now i can go to recovery
To flash modpunk's TWRP and vbmeta on S10e SM-970F Exynos international version, you need to:
1) Download the latest TWRP here.
2) Download vbmeta disabled image here.
3) Extract twrp-3.3.1-0-android-10.0-beyond0lte-5.img from the twrp-3.3.1-0-android-10.0-beyond0lte-5.img.xz with 7zip to fx. Desktop. 7zip can be found here.
4) Rename twrp-3.3.1-0-android-10.0-beyond0lte-5.img to recovery.img.
5) Rename vbmeta-disabled.img to vbmeta.img.
6) Place vbmeta.img in same place as recovery.img.
7) Open 7zip, and navigate to where vbmeta.img and recovery.img is placed.
8) Archieve vbmeta.img and recovery.img in one arhieve of .tar format (fx. TWRP.tar), and use "Compression level": Store.
9) Turn of your device
10) Press and hold the volume down and bixby (Not power!), and keep holding it, while connecting the USB cable between phone and PC.
11) When the download mode warning screen appear, release all buttons, and follow the instructions on the download mode warning screen.
12) Open up Odin3 v3.13.1 as admin, and you should se a message saying "Added" in the log, and a blue flag above ID:COM, together with a port number. Odin can be found here, or direct link here.
13) Press on AP in Odin, and navigate to where TWRP.tar is placed, and select it, so AP becomes checked, and the path to TWRP.tar is viewable in the AP slot.
14) Navigate to options in Odin, and make sure that "Auto Reboot" is NOT selected, and navigate back to the Log tab.
15) Press start to flash TWRP.tar.
16) When a success message is stated in the log, then exit download mode by pressing volume down and power.
17) When the screen turns of, you need to immediately press the recovery combo (VolumeUp, Bixby and Power), and keep holding it, until the secondary warning appears (The one with warning about unlocked bootloader), then release Bixby and Power, but keep holding volume up, until the TWRP logo is seen.
the phone is looping, how i go to the recovery ? PLEASE HELP
EDIT: i flash this one twrp-beyond2lte-3.4.0-3_ianmacd.img and now i can go to recovery
Last edited:
i followed this great guide and could successfully flash twrp, lineagos and magisk. Unfortunatelly, in LOS fingerprint and selfie cam is not working, so i want to try another custom Rom or stock again.Disclaimer by @Ivan_Meler:
Code:/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns before flashing! * YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. *
The instuctions below asume you have an unlocked bootloader, which is mandatory, and if your bootloader isn't unlocked, please look here how to unlock it, and if the OEM unlock button is missing, also look here.
To flash modpunk's TWRP and vbmeta on S10e SM-970F Exynos international version, you need to:
1) Download the latest TWRP here.
2) Download vbmeta disabled image here.
3) Extract twrp-3.3.1-0-android-10.0-beyond0lte-5.img from the twrp-3.3.1-0-android-10.0-beyond0lte-5.img.xz with 7zip to fx. Desktop. 7zip can be found here.
4) Rename twrp-3.3.1-0-android-10.0-beyond0lte-5.img to recovery.img.
5) Rename vbmeta-disabled.img to vbmeta.img.
6) Place vbmeta.img in same place as recovery.img.
7) Open 7zip, and navigate to where vbmeta.img and recovery.img is placed.
8) Archieve vbmeta.img and recovery.img in one arhieve of .tar format (fx. TWRP.tar), and use "Compression level": Store.
9) Turn of your device
10) Press and hold the volume down and bixby (Not power!), and keep holding it, while connecting the USB cable between phone and PC.
11) When the download mode warning screen appear, release all buttons, and follow the instructions on the download mode warning screen.
12) Open up Odin3 v3.13.1 as admin, and you should se a message saying "Added" in the log, and a blue flag above ID:COM, together with a port number. Odin can be found here, or direct link here.
13) Press on AP in Odin, and navigate to where TWRP.tar is placed, and select it, so AP becomes checked, and the path to TWRP.tar is viewable in the AP slot.
14) Navigate to options in Odin, and make sure that "Auto Reboot" is NOT selected, and navigate back to the Log tab.
15) Press start to flash TWRP.tar.
16) When a success message is stated in the log, then exit download mode by pressing volume down and power.
17) When the screen turns of, you need to immediately press the recovery combo (VolumeUp, Bixby and Power), and keep holding it, until the secondary warning appears (The one with warning about unlocked bootloader), then release Bixby and Power, but keep holding volume up, until the TWRP logo is seen.
18) If you have entered TWRP, then go to bulletpoint 20.
19) If the phone fails to turn on after 10 seconds, then push power first and immediately after press bixby and volume up as well, until the secondary warning appears (The one with warning about unlocked bootloader), then release Bixby and Power, but keep holding volume up, until the TWRP logo is seen.
20) In TWRP, swipe slider to allow modification.
Since @modpunk's TWRP support FBE, you wont be able to see your files through TWRP, until you format data, so:
1) Go to "Wipe" > "Format Data" in TWRP.
2) Enter "Yes" in the field to format the data partition/factory reset the device.
3) Go to the "Reboot" menu in TWRP and select "Recovery" to reboot your Samsung Galaxy S10e.
4) If the phone boots to TWRP again, then go to "Reboot" menu in TWRP and select "System".
If you also want to instal LineageOS as well, then:
1) Make sure the LineageOS flashable .zip file is placed on an external SD card.
and flash it while you are in TWRP, otherwise it will be wiped when formating the data partition/factory resetting the device.
2) Go to "Install" > "Select Storage" > "Micro SD card".
3) Navigate to where LineageOS flashable .zip file is placed, and press to flash.
4) Confim by sliding the slider.
5) After successful flash, then =>
a) If comming from stock or uncompatible ROM, do a full wipe (ART, Cache, Data).
b) If comming from same developper LineageOS, wipe (ART, Cache).
Just to have everything in one place, and to gain Magisk root by modpunk's Magisk boot image, then:
1) Download Magisk boot image for S10e to PC from (magisk_boot_ctc9_beta1.img.xz) here
2) Extract magisk_boot_ctc9_beta1.img from magisk_boot_ctc9_beta1.img.xz with 7zip, and place the magisk_boot_ctc9_beta1.img in root of your SD card on the phone.
3) Download Magisk Manager 7.5.1 from here, or direct link here.
4) Install Magisk Manager 7.5.1 on S10e, and don't wory about it not being instaled, when Magisk is fired up.
5) Turn of the phone.
6) When the screen turns of, you need to turn on the phone by pressing the recovery combo (VolumeUp, Bixby and Power), and keep holding it, until the secondary warning appears (The one with warning about unlocked bootloader), then release Bixby and Power, but keep holding volume up, until the TWRP logo is seen.
7) If you have entered TWRP, then go to bulletpoint 9.
8) If the phone fails to turn on after 10 seconds, then push power first and immediately after press bixby and volume up as well, until the secondary warning appears (The one with warning about unlocked bootloader), then release Bixby and Power, but keep holding volume up, until the TWRP logo is seen.
9) Navigate by pressing "Instal" > "Select Storage" > "SD card".
10) Press "Install Image" to be able to flash an .img file.
11) Navigate to where the magisk_boot_ctc9_beta1.img is placed, and select it.
12) Flash magisk_boot_ctc9_beta1.img by swiping the slider.
13) When flashing is complete, DO NOT do any other modification, navigate back to main screen, and select "Reboot" > "System".
14) Phone phone is started, enter Magisk Manager.
15) Magisk Manager will ask to do additional setup, and select yes to to confirm.
After auto reboot, there is no need for recovery combo to enter rooted system, that is now no longer needed.
Hope it helps
These are windows instruction, but I still hope someone can share knowledge about Heimdal.
As i am a noob to this, please excuse my stupid questions i have now. this 3 things are unclear to me:
If i want to switch to another custom rom (and have magisk), all i have to do is:
- go to twrp
- Wipe cache + dalvik, format data
- flash new rom
- Wipe cache + dalvik, format data
- optional: flash gapps
-reboot system
- install magisk manager apk
is this correct???
if i want to go back to stock:
do i have to flash full stock firmware via odin and start the steps of the guide from bulletpoint 1 again?
or can i flash stock OS via twrp? how? or via odin? if via odin, how can i kep magisk boot image wit vbmeta-disabled and twrp?
when having stock with twrp an magisk:
is it better to use this twrp (with vbmeta-disabled) or is it better to have ians twrp?
Hi everyone,
Ran into some trouble and was hoping to find some help here.
I flashed twrp with Odin on my s10e, but must have f'ed up at some point.
I'm stick in download mode now, can't eben turn the device off without draining the battery. As soon as I plug in the charger it goes back into download mode again.
Is it possible to revert back to a stock bootloader somehow?
Any advice is appreciated.
PL
Ran into some trouble and was hoping to find some help here.
I flashed twrp with Odin on my s10e, but must have f'ed up at some point.
I'm stick in download mode now, can't eben turn the device off without draining the battery. As soon as I plug in the charger it goes back into download mode again.
Is it possible to revert back to a stock bootloader somehow?
Any advice is appreciated.
PL
Can we manualy mount /data encrypted with fstab "encryptable=footer" ? (without rebuilding TWRP with new fstab)
using something like :
I can't understand how we can pass the password to decrypt files
using something like :
Code:
mount -t ext4 -o noatime,nosuid,nodev,noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic\ wait,check,encryptable=footer,quota,reservedsize=128M,length=-20480 /dev/block/platform/13d60000.ufs/by-name/userdata /dataHello,
My twrp doesnt seem to recognize that i have PIN so the internal storage is encrypted and has folders with strange name
My twrp doesnt seem to recognize that i have PIN so the internal storage is encrypted and has folders with strange name
I have a problem with TWRP Backup of Data? I have in the middle of backup a Error 255, in the Log file i can see it's a problem with /system_ce/0.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone