• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[RECOVERY][Huawei P7-L10] TWRP 2.8.7.0 touch recovery [2015-07-19]

Search This thread

Araca

Senior Member
Mar 17, 2014
88
219
9gvia8.jpg


Compiled from latest Source's (Android 5.1.1) and build for Huawei P7-L10

Works on EMUI 3.0 - 4.4.2 and EMUI 3.1 - 5.1.1



Changelog TWRP 2.8.7.0

-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)on Android 5.1.1
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)

Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.

System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.

resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.

This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.

Bugs

- CPU Temp is not displayed

How to install

Unlocked bootloader is recommend!

Flash via fastboot

adb reboot-bootloader

fastboot flash recovery TWRP-2.8.7.0.img

fastboot reboot

Download

MEGA

Sourcecode

GitHub

BIG THX FOR HELP

@_that
@SHM
@yuweng
@surdu_petru
@acbka
 
Last edited:

nelson_17

Member
Jul 25, 2014
35
31
maracay
Help, I can not flash any recovery, to start in bootloader says in red letters phone is unlocked and this error appears to me, with your probe you provided me with the TWRP and that other CWM (changing the carefully clear name) when I flash it by Forzo flashify installation and remains in the logo with the LED flashing red and green and to get him out of there original flashee by fastboot boot recovery and smoothly ...

25j9hfr.jpg
 

MisterVik

Senior Member
Feb 17, 2012
50
4
Barcelona
Hi,

I have two issues:

After flashing this recovery, when I try to power off the phone, it reboots to recovery.

When I try to connect to my computer in debug mode, fastboot don't recognize the device (I try this to flash the stock recovery, I used TWRP to flash SuperSU)

I want to power off the phone when i need to do it...

Some help?

Thanks in advance, regards

Víctor
 
S

SHM

Guest
Hi,

I have two issues:

After flashing this recovery, when I try to power off the phone, it reboots to recovery.

When I try to connect to my computer in debug mode, fastboot don't recognize the device (I try this to flash the stock recovery, I used TWRP to flash SuperSU)

I want to power off the phone when i need to do it...

Some help?

Thanks in advance, regards

Víctor

Are you saying that while in TWRP when you select to power off it reboots the recovery?

And when you say debug mode, are you referring to while your system OS is booted up that you are attempting to use fastboot?

Sent from my C525c using Tapatalk
 

MisterVik

Senior Member
Feb 17, 2012
50
4
Barcelona
Are you saying that while in TWRP when you select to power off it reboots the recovery?

And when you say debug mode, are you referring to while your system OS is booted up that you are attempting to use fastboot?

Sent from my C525c using Tapatalk

Hi SHM,

Thanks for your reply.

First question: no, i'm saying that when i'm in Android and select from power menu to power off, it reboots to TWRP recovery.

Second question: no, i'm referring when my phone is in debug mode (adb mode) my computer doesn't recognize it (before flashing TWRP recovery, with stock recovery, it recognizes)

Thanks in advance, regards

Víctor
 
S

SHM

Guest
Hi SHM,

Thanks for your reply.

First question: no, i'm saying that when i'm in Android and select from power menu to power off, it reboots to TWRP recovery.

Second question: no, i'm referring when my phone is in debug mode (adb mode) my computer doesn't recognize it (before flashing TWRP recovery, with stock recovery, it recognizes)

Thanks in advance, regards

Víctor
This is very unusual behavior. In fact, this is the first time I have ever heard of this kind of behavior. Especially with the issue of powering off your device and instead it reboots your recovery.... Will have to brainstorm on my end.

Sent from my C525c using Tapatalk
 
S

SHM

Guest
@MisterVik are you currently using a mod for powering off, rebooting, etc, or is the power options seen on your device completely stock?

Sent from my C525c using Tapatalk
 

MisterVik

Senior Member
Feb 17, 2012
50
4
Barcelona
@MisterVik are you currently using a mod for powering off, rebooting, etc, or is the power options seen on your device completely stock?

Sent from my C525c using Tapatalk
@SHM

It happens while using the default stock power off menu, no mod installed (like xposed)

But, now and because your question, i remember a modify i did in build.prop. I check it right now.

Thanks, regards

Víctor

Edited: no mod installed
 
Last edited:

MisterVik

Senior Member
Feb 17, 2012
50
4
Barcelona
@SHM

Don't ask me how, but now, without any changes, when I select power off on power menu, phone goes off properly!

Still having the issue with the connection to the computer in ADB mode...

Thanks and regards

Edit: solved both, maybe yesterday isn't my day. Booted directly in fastbood mode, and then flashed stock recovery.
 
Last edited:

badboyforlife

New member
May 18, 2008
4
0
hello

i succesfully installed TWRP 2.8.7.0.img
also every other version i cant get it activated
i used my phone keys volule up & at same time powerbutton i always get in fastboot menu
WHAT DO I WRONG??
 

Top Liked Posts

  • There are no posts matching your filters.
  • 18
    9gvia8.jpg


    Compiled from latest Source's (Android 5.1.1) and build for Huawei P7-L10

    Works on EMUI 3.0 - 4.4.2 and EMUI 3.1 - 5.1.1



    Changelog TWRP 2.8.7.0

    -Initial ground work for software drawn keyboard (_that)
    -Fix handling of wiping internal storage on datamedia devices (xuefer)
    -Allow DataManager to set and read values from the system properties (xuefer)
    -Fix crash when taking screenshots on arm64 devices (xuefer)on Android 5.1.1
    -Fix error message after an ORS script completes (Dees_Troy)
    -Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
    -Add system read only option – more details below (Dees_Troy)
    -Add resize2fs and GUI option to run resize2fs (Dees_Troy)
    -Fix crash loop caused by empty lines in AOSP recovery command file (_that)
    -Prevent duplicate page overlays such as multiple lock screens (mdmower)

    Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.

    System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.

    resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.

    This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.

    Bugs

    - CPU Temp is not displayed

    How to install

    Unlocked bootloader is recommend!

    Flash via fastboot

    adb reboot-bootloader

    fastboot flash recovery TWRP-2.8.7.0.img

    fastboot reboot

    Download

    MEGA

    Sourcecode

    GitHub

    BIG THX FOR HELP

    @_that
    @SHM
    @yuweng
    @surdu_petru
    @acbka
    3

    :D yeah i have to fix one bug first before release ....
    because twrp will backup the whole sdcard when you select the data partion for backup..
    i think release will be tommorow . but beside that and the cpu temp all is working well :)
    2
    Download is now live :d
    1
    It works very well, health in your hand.
    1
    Job Well Done i Must Say !! :D:D