Recovery image verify failed! Huawei Ascend G6-U10

[aqsad.javed]

Hey, I was using Ascend G6 Mobile. After update its Recovery image when I reboot this mobile unfortunately its show this message,
"Recovery image verify failed! "
"Please update to the authorized images. "

I'm much worried about it. Please help me that how can I solve this problem. I'm waiting answer...

 

[osmera]

it is in fastboot mode.
install the original recovery with the fastboot command
fastboot flash recovery original-recovery.bin
you have first find the original recovery for your g6-u10 (I have g6l11 and it is different)

 

[aqsad.javed]

How can i install recovery with fastmood? Any software? Please tell me by details.

Sent from my A20 using XDA Free mobile app

 

[osmera]

read again my post, I already wrote it:

fastboot flash recovery original-recovery.bin

 

[aqsad.javed]

I search many times but i don't any file original recovery.bin.

Sent from my A20 using XDA Free mobile app

 

[osmera]

here it is
https://www.dropbox.com/s/5nzdmk4gvgsrdli/ADB and CWM for G6-u10.ZIP?dl=0

there is complete set of file you need.

And next time be more careful what are you doing

 

[aqsad.javed]

Thanks for this. But I tried it many time. After sending recovery file and 20% its show this message, *Remote recovery not allowed. *
How can I fix this problem?

 

[grofweg]

May be it is needed to unlock the bootloader first.

 

[aqsad.javed]

Haw can I unlock bootloader?

 

[osmera]

try to be more proactive, everything is already on web. Good tool is google search!

Unlocking bootloader.
First you have to ask huawei for unlock code
http://en.club.vmall.com/emotiondownload.php?mod=unlock&action=apply

When you get your code you have to connect your phone on fastboot mode and you will send this command (change the code to your code from mail)

fastboot oem unlock 1234567812345678

then your bootloader is unlocked and you can change your recovery

 

[aqsad.javed]

When i use this command, its shows me this Msg!

"C:\fastboot flashall
error: neither -p product specified nor ANDROID_PRODUCT_OUT set"

 

[osmera]

and why do you use this command?????
It is much better to use command that is suggested.
Sorry, but I am loosing my patience with you. You refuse to use search function, you refuse to listen to advices,....
So please go to the repair center and pay for the repair.

 

[gu5t3r]

May be it is needed to unlock the bootloader first.

try to be more proactive, everything is already on web. Good tool is google search!

Unlocking bootloader.
First you have to ask huawei for unlock code
http://en.club.vmall.com/emotiondownload.php?mod=unlock&action=apply

When you get your code you have to connect your phone on fastboot mode and you will send this command (change the code to your code from mail)

fastboot oem unlock 1234567812345678

then your bootloader is unlocked and you can change your recovery

Will unlocking bootloader wipe data partition on Huawei Ascend G6?

 

[osmera]

Will unlocking bootloader wipe data partition on Huawei Ascend G6?

No, everything remain the same, even the installed apps.

 

[gu5t3r]

No, everything remain the same, even the installed apps.

Thank You Very Much

=)

 

[persona78]

When i use this command, its shows me this Msg!

"C:\fastboot flashall
error: neither -p product specified nor ANDROID_PRODUCT_OUT set"

You have a big problem because your bootloader is locked, and to know your ID you need to turn him ON! ...

To unlock bootloader you need to know:

IMEI (easy)
SN (Serial number) easy to

And ID (Huawei ID from the device) and to know you must use the dial key pad ....

My advice is Flash a full ROM ...

Go to http://consumer.huawei.com/en/ Look for your Region, search for G6 and in downloads see if have your ROM.

download, extract the dload folder , copy to sd card, press vol +, vol - and power at same time and hold it, release power key on power ON, and vols when start to flash.

Sorry but you will loose your data, but fix the phone.

 

[may06]

have the same problem

 

[tonymaster66]

Hey, I was using Ascend G6 Mobile. After update its Recovery image when I reboot this mobile unfortunately its show this message,
"Recovery image verify failed! "
"Please update to the authorized images. "

I'm much worried about it. Please help me that how can I solve this problem. I'm waiting answer...

Hey, i have the same problem in my huawei g7 ascend and i don't know how to solve it i need help plss!

 

[minteznation]

Hey, I was using Huawei y635-l21 After update its Recovery image when I reboot this mobile unfortunately its show this message,
"Recovery image verify failed! "
"Please update to the authorized images. "

 

[Raffay11]

I beed file for huawei y 530-u00 can you guide me please it is also locjed