• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[RECOVERY] [ISOREC] [TWRP 3.0.2-1] [OFFICIAL] [26/04/2016]

Search This thread

arnab

Inactive Recognized Developer
Feb 1, 2007
1,383
3,226
Nagpur
twrp_zpsf5jhec0s.png


Disclaimer
Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 */


Features
Code:
. Completely new theme
. True Terminal Emulator
. Language translation
. Flashing of sparse images
. Adopted storage support for select devices
. Reworked graphics to bring us more up to date with AOSP
. SuperSU prompt will no longer display if a Marshmallow ROM is installed
. Update exfat, exfat fuse, dosfstools
. Update AOSP base to 6.0
. A huge laundry list of other minor fixes and tweaks


Installation instructions

Code:
[U]Flash via Recovery[/U]

. Download the TWRP zip file from the Downloads section
. Flash using CM/TWRP recovery
. Kernel must be IsoRec compatible
. What is IsoRec? Please visit [URL="http://forum.xda-developers.com/galaxy-s2/orig-development/isorec-isolated-recovery-galaxy-s2-t3291176"][U]here[/U][/URL]

Code:
[U]Flash via HeimdallSuite (Windows only)[/U]

. Download [URL="http://forum.xda-developers.com/attachment.php?attachmentid=3713767&d=1460278689"][U]HeimdallSuite[/U][/URL] & [URL="http://forum.xda-developers.com/attachment.php?attachmentid=3713769&d=1460278744"][U]Samsung USB Drivers[/U][/URL]
. Install Samsung USB Drivers
. Connect the phone in Download mode (Vol. Down + Home + Power)
. Go to Heimdall Suite/Drivers & open 'zadig' (Run in admin mode)
. Select 'List All Devices' under 'Options'
. Select 'Gadget Serial' & 'libusb0 (v1.2.5.0)' from the drop menu & scroll menu respectively
. Click on Install/Replace Driver
. Close 'zadig'
. Reboot again into Download mode
. Open 'heimdall-frontend'
. Select 'Utilities' tab & click on 'Detect' under 'Detect Device' option
. Make sure the 'Output' window says 'Device Detected'
. Scroll down to 'Download PIT' section & click on 'Save As...' under 'Destination File'
. Type any name under 'Name:' and select 'Save'. Do not give any filename extensions
. Click on 'Download'
. Reboot again into Download mode
. Select 'Flash' tab
. Load the downloaded pit under 'PIT'. Do not select 'Repartition' checkbox
. Click the 'Add' button under 'Partitions (Files)'
. Select 'RECOVERY' from the drop down menu in 'Partition Name' under 'Partition Details'. Make sure 'Partition ID' reads 7
. Download the latest TWRP image from the official website
. Load the img image under 'File'
. Now click on 'Start'
. The image will get flashed in '/dev/block/mmcblk0p6' partition under mountpoint '/recovery'
. Device will automatically restart when flashing is complete

Code:
[U]Update via Recovery[/U]

. Download latest TWRP image from the official website
. Boot into TWRP and from 'Install' select 'Install Image'
. Select the downloaded img image file
. Select 'Recovery' under the Partition selection menu
. Swipe to start the Flash
. Reboot again into recovery to use the new updated TWRP


Changelog
Code:
[U]26/04/2016[/U]

. Updated TWRP sources
. Fixed labeling of storage
. Fixed fsck.f2fs generation
. Added USB OTG support
. Removed many depreciated flags(TWRP tree cleanup)


Bugs
Code:
None




Video Review


Join the TWRP Community for the latest updates

XDA:DevDB Information
TWRP, Tool/Utility for the i9100

Contributors
arnab, Dees_Troy, Lanchon
Source Code: https://github.com/TeamWin/android_device_samsung_i9100


Version Information
Status: Stable
Current Stable Version: 3.0.2-1
Stable Release Date: 2016-04-26

Created 2016-03-07
Last Updated 2016-04-27
 

Attachments

  • HeimdallSuite_v1.4.0.zip
    9.5 MB · Views: 74,043
  • SAMSUNG_USB_Driver_for_Mobile_Phones.zip
    15.3 MB · Views: 39,240
Last edited:

arnab

Inactive Recognized Developer
Feb 1, 2007
1,383
3,226
Nagpur
Hi, @arnab! I got error 255 when i try format cache in f2fs. If i format manualy and try wipe cache, i got error too.

I have this same issue...its not twrp fault.. Only the cache throws the the error... I think its bcoz if the external/f2fs-tools repo... Here the mkfs.f2fs gets compiled...i tried to use the cm repo but it wont even compile... I had to use the omni repo.

Soln:- Install cm... Go to cm recovery... Type adb shell on pc... Then format it frm there... Mkfs.f2fs /dev/block/mmcblk0p7....when u come back to twrp.. Frm settings just use rm-rf for the cache partition... I already forwarded this problem to twrp lead developers.

Sent from my MI 3W using XDA Free mobile app
 
Last edited:
  • Like
Reactions: Syaani

stylemessiah

Senior Member
May 2, 2008
1,069
970
Sydney
So....
Does this new version have OTG support?
I get tired of having to break out the terminal in TWRP everytime i want to flash a ROM from my USB key with ROMs on

And if it doesnt, why, because CWM has had OTG out of the box forever

p.s. I may have a pathological hatred of TWRP
 

Dr AM

Senior Member
Jun 12, 2012
1,866
928
Gaza
Don't know why , but it doesn't work for me , if I flash it then reboot I get stuck on samsung logo o_O

Sent from my GT-I9100
 

the.gangster

Senior Member
Apr 3, 2015
953
1,371
Samsung Galaxy S7
Just to echo it here (as I used the bug-report for that) and as it might prevent some people from running into problems later:
@arnab
not a bug, but maybe you should also name the zip to reflect it is an IsoRec recovery (e.g. recovery-IsoRec-TWRP_i9100_3.0.0-0) ? Just to make sure there is no confusion about that.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 131
    twrp_zpsf5jhec0s.png


    Disclaimer
    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     */


    Features
    Code:
    . Completely new theme
    . True Terminal Emulator
    . Language translation
    . Flashing of sparse images
    . Adopted storage support for select devices
    . Reworked graphics to bring us more up to date with AOSP
    . SuperSU prompt will no longer display if a Marshmallow ROM is installed
    . Update exfat, exfat fuse, dosfstools
    . Update AOSP base to 6.0
    . A huge laundry list of other minor fixes and tweaks


    Installation instructions

    Code:
    [U]Flash via Recovery[/U]
    
    . Download the TWRP zip file from the Downloads section
    . Flash using CM/TWRP recovery
    . Kernel must be IsoRec compatible
    . What is IsoRec? Please visit [URL="http://forum.xda-developers.com/galaxy-s2/orig-development/isorec-isolated-recovery-galaxy-s2-t3291176"][U]here[/U][/URL]

    Code:
    [U]Flash via HeimdallSuite (Windows only)[/U]
    
    . Download [URL="http://forum.xda-developers.com/attachment.php?attachmentid=3713767&d=1460278689"][U]HeimdallSuite[/U][/URL] & [URL="http://forum.xda-developers.com/attachment.php?attachmentid=3713769&d=1460278744"][U]Samsung USB Drivers[/U][/URL]
    . Install Samsung USB Drivers
    . Connect the phone in Download mode (Vol. Down + Home + Power)
    . Go to Heimdall Suite/Drivers & open 'zadig' (Run in admin mode)
    . Select 'List All Devices' under 'Options'
    . Select 'Gadget Serial' & 'libusb0 (v1.2.5.0)' from the drop menu & scroll menu respectively
    . Click on Install/Replace Driver
    . Close 'zadig'
    . Reboot again into Download mode
    . Open 'heimdall-frontend'
    . Select 'Utilities' tab & click on 'Detect' under 'Detect Device' option
    . Make sure the 'Output' window says 'Device Detected'
    . Scroll down to 'Download PIT' section & click on 'Save As...' under 'Destination File'
    . Type any name under 'Name:' and select 'Save'. Do not give any filename extensions
    . Click on 'Download'
    . Reboot again into Download mode
    . Select 'Flash' tab
    . Load the downloaded pit under 'PIT'. Do not select 'Repartition' checkbox
    . Click the 'Add' button under 'Partitions (Files)'
    . Select 'RECOVERY' from the drop down menu in 'Partition Name' under 'Partition Details'. Make sure 'Partition ID' reads 7
    . Download the latest TWRP image from the official website
    . Load the img image under 'File'
    . Now click on 'Start'
    . The image will get flashed in '/dev/block/mmcblk0p6' partition under mountpoint '/recovery'
    . Device will automatically restart when flashing is complete

    Code:
    [U]Update via Recovery[/U]
    
    . Download latest TWRP image from the official website
    . Boot into TWRP and from 'Install' select 'Install Image'
    . Select the downloaded img image file
    . Select 'Recovery' under the Partition selection menu
    . Swipe to start the Flash
    . Reboot again into recovery to use the new updated TWRP


    Changelog
    Code:
    [U]26/04/2016[/U]
    
    . Updated TWRP sources
    . Fixed labeling of storage
    . Fixed fsck.f2fs generation
    . Added USB OTG support
    . Removed many depreciated flags(TWRP tree cleanup)


    Bugs
    Code:
    None




    Video Review


    Join the TWRP Community for the latest updates

    XDA:DevDB Information
    TWRP, Tool/Utility for the i9100

    Contributors
    arnab, Dees_Troy, Lanchon
    Source Code: https://github.com/TeamWin/android_device_samsung_i9100


    Version Information
    Status: Stable
    Current Stable Version: 3.0.2-1
    Stable Release Date: 2016-04-26

    Created 2016-03-07
    Last Updated 2016-04-27
    34
    New TWRP 3.1.0-0 build released

    After TWRP officially announced the availability of the TWRP 3.1.0-0 recovery and also provided a new image-download for our device already earlier today, and after taking a short look at it to have proof it was build upon an Android 5.1.1 ramdisk, (which is important for us, to prevent bootloops if installed on all the earlier kernels with IsoRec-support) I feel quite comfortable in offering that new official version wrapped into a signed flashable ZIP again for your convenience.

    recovery-the.gangster-IsoRec-TWRP-3.1.0-0-i9100.zip (.md5)

    Some answers to the usual questions:
    -New users being directed here and who didn't read the thread yet should know that the recovery will only be loaded if your kernel supports IsoRec-recoveries.
    -No, this is not an emulated-storage migration build
    -No, there is no difference to the official TWRP 3.1.0-0, it is exactly the latter (just as a flashable ZIP). So all the thanks for the new version itself go to TWRP team and arnab as our device supporter.
    -Yes, you can flash this zip from almost every recovery (as it is signed) at least as long as it is KK-compatible.

    older Versions:
    The 3.0.2-1 is linked here.
    The 3.02.-1 special version with preload-support (modded to allow formatting preload) is linked here.
    33
    Plz just wait. We will be receiving official twrp support shortly.
    24
    A huge thanks to @Lanchon who let me use his script.
    22
    New TWRP Update

    Changelog

    26/04/2016

    . Updated TWRP sources
    . Fixed labeling of storage
    . Fixed fsck.f2fs generation
    . Added USB OTG support
    . Removed many depreciated flags(TWRP tree cleanup)


    Directly download the img file, and update via recovery.