• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[RECOVERY][ks01lte] TWRP 3.1.0-0 touch recovery with F2FS support [CLOSED UPDATES]

Search This thread

CastagnaIT

Recognized Developer
Feb 11, 2012
301
2,811
Venice
www.autorinomina.it
-- Team Win Recovery Project --
vcgkaa3nudc523ffg.jpg
Supported model ONLY ks01lte

I'm sorry but my i9506 is definitely dead, who wants to use my source code to create new updates this is the guide:
(links below)
device > use branch cm-14.1_twrp
kernel > use branch cm-14.1-rc
android_bootable_recovery repo > rebase with official omni repo or cherry-pick my last two commit on top​

Team Win Recovery Project 3.x, or twrp for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

I built this recovery by using my cleaned source code for kernel and OmniRom for twrp.

If you find any bug or problem please reply below this thread or use the dedicated tab page "Bug Reports" over here.


Phone look:
o8i41z9k679wj4r6g.jpg



Features:
  • MTP auto mounting for SD / External SD
  • Mass storage mounting for External SD
  • Usb OTG
  • Full SELinux support
  • Supported F2FS (system, data, cache partitions)
  • CPU temperature handled
  • Thermal control and Performance profiles are active by default
  • Backup/Restore tested with 4.4.2/5.1 TW original samsung rom and all CyanogenMod
  • Screen shot capture enabled (Volume (-) + Power) (saved in the "Picture" folder)
  • Charge-Led


Known problems:
-Samsung HW encryption does not work well, follow this steps to decrypt /data: (thanks Diapolo)
1 - In the initial dialog "Enter Password." press Cancel
2 - "Swipe to Allow Modifications"
3 - Go to "Mount" and select "System" partition
4 - Press "Decrypt Data" and on "Enter Password." dialog press Accept



Changelog:

This is the changelog of my TWRP versions releases, if you want read the original changelog of TWRP versions go to:
http://teamw.in/project/twrp2

CHANGELOG for 3.1.0-0 [04/04/2017]:
-Updated kernel

CHANGELOG for 3.0.3-0 [18/12/2016]:
-Updated kernel
-Fixed twrp screen off timeout problem

CHANGELOG for 3.0.2-0 [20/11/2016]:
-Switched to TWRP android-7.1 branch
-Builded with a new stable kernel for Nougat and CM-14.1
-Added /misc partition on fstab for the recovery commands (Nougat changes)
-Tried to add Samsung HW encryption, it does not seem to work well i think it's incomplete, in our stock rom missing some file
such as keystore.xx.so and firmware files such as keymaster.xxx

CHANGELOG for 3.0.2-0 [08/05/2016]:
-Fixed chargeled service
-Fixed SEANDROIDENFORCE warning at boot, again
-Some changes in the partitions parameters on fstab

CHANGELOG for 3.0.2-0 [07/05/2016]:
-Switched to TWRP android-6.0 branch
-Builded from cm-13.0 repo
-New kernel made by me with latest LP sources

CHANGELOG for 2.8.7.0 [01/08/2015]:
-Switched to TWRP android-5.1 branch
-Builded from cm-12.1 repo
-Updated kernel from cyanogenmod
-Fixed brightness slider
-Fixed SEANDROIDENFORCE warning at boot

CHANGELOG for 2.8.5.0 [15/02/2015]:
-Fixed problem when wiping Data partition in F2FS

CHANGELOG for 2.8.4.0 [07/02/2015]:
-Added rewrite of TWRP settings after a SD wipe (prevent lost settings)
-Fixed mount F2FS or others filesystems to system, data, cache partitions
-Updated with latest changes from source

CHANGELOG for 2.8.4.0 [24/01/2015]:
-Switched to TWRP android-5.0 branch
-Brightness slider still does not work (it's a kernel related problem)

CHANGELOG for 2.8.1.0 [24/01/2015]:
-Updated kernel from cyanogenmod
-Screen blink on boot is not longer present
-Brightness slider no longer work (it's a kernel related problem)
-Added chargeled - adapted for samsung devices

CHANGELOG for 2.8.1.0 [27/11/2014]:
-Enabled mass storage mounting for external sd
-Fixed MTP mounting without external sd

CHANGELOG for 2.8.1.0:
-Initial TWRP release for I9506 (ks01lte)


How to do for install it:
FIRST INSTALL FROM ODIN (v3.07 or higher):
-Download twrp .TAR.MD5 file.
-Go to download mode (Volume down + Home + Power)
-Open Odin and check AutoReboot and F.Reset Time checkboxes are selected, also Re-Partition it NOT selected.
-Click on AP (PDA) and select the downloaded twrp recovery tar.md5 file.
-Check if all options are corrects, and press Start.
-Once the installation process complete, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

-Some users has found problems with previous procedure: in this unlucky situation, when phone reboot and the logo (i9506 Samsung S4 Galaxy) appear, pull out the battery. Don't panic, the logo is there for several seconds. The installation process should be finalized now. There will be no PASS status in Odin. Put back the battery in the phone and try to boot straight to recovery.

UPGRADE YOUR TWRP:
-Download twrp .ZIP file.
-Copy the recovery zip file in the internal SD or external SD.
-Go to recovery mode (Volume up + Home + Power)
-Touch the INSTALL button.
-Select the appropriate SD
-Select the twrp file copied previously and slide to flash.
-Press back some times and reboot.


DOWNLOAD:
You can dowload the current version from this folder, you will find the flashable zip and tar version.
CLICK HERE TO GET DOWNLOAD FOLDER

To download Odin go here: samsungodin.com

SOURCES:
TWRP Source: https://github.com/omnirom/android_bootable_recovery
Kernel Source: https://github.com/CastagnaIT/android_kernel_samsung_ks01lte
Device Source: https://github.com/CastagnaIT/android_device_samsung_ks01lte


Thanks to: CyanogenMod, OmniRom Team, TWRP Team, Dees_Troy, Solk2, DualJoe​

XDA:DevDB Information
TWRP, Tool/Utility for the Samsung Galaxy S4

Contributors
CastagnaIT, smeroni68

Version Information
Status: Stable
Current Stable Version: v3.1.0-0
Stable Release Date: 2017-04-04

Created 2014-11-16
Last Updated 2017-07-15
 
Last edited:

mar10o

Senior Member
May 16, 2011
177
87
I've trayed stock recovery version. It doesn't work, there is something wrong with "footer"?
Signature verification failed.

I have the latest stock NEE firmware.

Wysłane z mojego GT-I9506
 
Last edited:

DualJoe

Senior Member
Oct 12, 2011
2,141
1,020
de
Your current filename TWRP_2.8.1.0_ks01lte_20141115.tar.md5 won't get accepted by Odin 3.09. It should be TWRP_2.8.1.0_ks01lte.tar.md5 as generated by md5sum (that includes/binds filename as well). Or just omit md5sum step completely. Its not mandatory.

Edit: Looks like forum database has been set back (and so is your 1st post). One fellow guy is missing again.
 
Last edited:
  • Like
Reactions: CastagnaIT

nydxlil

Member
Jan 3, 2012
5
0
Augustenborg
When I'm trying to root my I9506 it tells me it failed to verify footer. I have tried keymaster, PhilZ touch and ROOT_E330S_I9506_v2 - it won't root the phone. And since this goes on, I cannot use Odin to flash neither TWRP or CWM (specified for I9506). I really hope for some help for this, as it bugs me really hard.
 

morten82

Member
Jan 14, 2011
39
8
When I'm trying to root my I9506 it tells me it failed to verify footer. I have tried keymaster, PhilZ touch and ROOT_E330S_I9506_v2 - it won't root the phone. And since this goes on, I cannot use Odin to flash neither TWRP or CWM (specified for I9506). I really hope for some help for this, as it bugs me really hard.

Du får ikke root ved at flashe recovery... Du skal flashe en version (som svarer til din firmware version) af AutoRoot fra denne tråd http://forum.xda-developers.com/showthread.php?t=2597058
 

nydxlil

Member
Jan 3, 2012
5
0
Augustenborg
Du får ikke root ved at flashe recovery... Du skal flashe en version (som svarer til din firmware version) af AutoRoot fra denne tråd http://forum.xda-developers.com/showthread.php?t=2597058

Så har jeg åbenbart fuldstændig misforstået de guides der er. Alle de forskellige roots jeg har fundet har ikke været signed så dem har jeg ikke kunne bruge Jeg prøver en af de pre-rooted rom'er og ser om de ikke kan "do the magic" senere i dag, BBL med svar. På forhånd tak :)
 

Rado G

New member
Nov 19, 2014
1
0
Kernel seandroid enforcing?

Hi. I have flasch tvrp recovery and it works perfect.
Only thing is this message on boot screen KERNEL IS SEANDROID ENFORCING
NO WARANTY BIT.
what its this?
Thanks for answers.
Sorry for my bad English
 

smeroni68

Inactive Recognized Contributor
Jan 23, 2011
4,456
11,022
Milano
Hi. I have flasch tvrp recovery and it works perfect.
Only thing is this message on boot screen KERNEL IS SEANDROID ENFORCING
NO WARANTY BIT.
what its this?
Thanks for answers.
Sorry for my bad English
Not stock recovery give knox 0x1 broken... the message is reporting this... it is irreversibile... That's the rule...

Inviato dal mio GT-I9505 utilizzando Tapatalk
 
  • Like
Reactions: Rado G

CastagnaIT

Recognized Developer
Feb 11, 2012
301
2,811
Venice
www.autorinomina.it
--new updates--

Only a quick update, the most important i fixed the MTP mount for internal storage when external SD isn't present, that before seemed not work properly.
All the changelog below.

CHANGELOG for 2.8.1.0 [27/11/2014]:
-Enabled mass storage mounting for external sd (CastagnaIT)
-Fixed MTP mounting without external sd (CastagnaIT)
-Various other bugfixes and tweaks by twrp team

Bye
CastagnaIT
 

enkku

Member
Feb 22, 2011
11
5
Hey,

Recently bought Galaxy S4 4g+ (i9506) and now trying to flash the latest TWRP (TWRP_2.8.1.0_ks01lte_20141127.tar.md5) with Odin 3.07, but it doesn't seem to work? Odin completes the flash just fine and gives the green "PASS" just fine but when I boot into recovery it's just the default one. Also Knox Warranty flag isn't triggered. What should I do to be able to flash TWRP (or any custom recovery)?

Thanks.

---------- Post added at 06:56 PM ---------- Previous post was at 06:02 PM ----------

Hey,

Recently bought Galaxy S4 4g+ (i9506) and now trying to flash the latest TWRP (TWRP_2.8.1.0_ks01lte_20141127.tar.md5) with Odin 3.07, but it doesn't seem to work? Odin completes the flash just fine and gives the green "PASS" just fine but when I boot into recovery it's just the default one. Also Knox Warranty flag isn't triggered. What should I do to be able to flash TWRP (or any custom recovery)?

Thanks.

Nevermind, battery pull trick did it and got it installed now (removed battery on Galaxy S4 logo after it auto reboots after flashing TWRP with Odin).
 

Fewuin

Member
Dec 12, 2014
6
0
When trying to flash ROM (CM12 2.4.1 I9506) it seems like it can't install/mount/unmount the /data, which results in the the recovery prompts that OS is not installed.
I've tried both TWRP and PhilZ (in PhilZ i get error: "unmount of /data failed; no such volume").
I'm desperate for a solution! Thanks in advance!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 45
    -- Team Win Recovery Project --
    vcgkaa3nudc523ffg.jpg
    Supported model ONLY ks01lte

    I'm sorry but my i9506 is definitely dead, who wants to use my source code to create new updates this is the guide:
    (links below)
    device > use branch cm-14.1_twrp
    kernel > use branch cm-14.1-rc
    android_bootable_recovery repo > rebase with official omni repo or cherry-pick my last two commit on top​

    Team Win Recovery Project 3.x, or twrp for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

    I built this recovery by using my cleaned source code for kernel and OmniRom for twrp.

    If you find any bug or problem please reply below this thread or use the dedicated tab page "Bug Reports" over here.


    Phone look:
    o8i41z9k679wj4r6g.jpg



    Features:
    • MTP auto mounting for SD / External SD
    • Mass storage mounting for External SD
    • Usb OTG
    • Full SELinux support
    • Supported F2FS (system, data, cache partitions)
    • CPU temperature handled
    • Thermal control and Performance profiles are active by default
    • Backup/Restore tested with 4.4.2/5.1 TW original samsung rom and all CyanogenMod
    • Screen shot capture enabled (Volume (-) + Power) (saved in the "Picture" folder)
    • Charge-Led


    Known problems:
    -Samsung HW encryption does not work well, follow this steps to decrypt /data: (thanks Diapolo)
    1 - In the initial dialog "Enter Password." press Cancel
    2 - "Swipe to Allow Modifications"
    3 - Go to "Mount" and select "System" partition
    4 - Press "Decrypt Data" and on "Enter Password." dialog press Accept



    Changelog:

    This is the changelog of my TWRP versions releases, if you want read the original changelog of TWRP versions go to:
    http://teamw.in/project/twrp2

    CHANGELOG for 3.1.0-0 [04/04/2017]:
    -Updated kernel

    CHANGELOG for 3.0.3-0 [18/12/2016]:
    -Updated kernel
    -Fixed twrp screen off timeout problem

    CHANGELOG for 3.0.2-0 [20/11/2016]:
    -Switched to TWRP android-7.1 branch
    -Builded with a new stable kernel for Nougat and CM-14.1
    -Added /misc partition on fstab for the recovery commands (Nougat changes)
    -Tried to add Samsung HW encryption, it does not seem to work well i think it's incomplete, in our stock rom missing some file
    such as keystore.xx.so and firmware files such as keymaster.xxx

    CHANGELOG for 3.0.2-0 [08/05/2016]:
    -Fixed chargeled service
    -Fixed SEANDROIDENFORCE warning at boot, again
    -Some changes in the partitions parameters on fstab

    CHANGELOG for 3.0.2-0 [07/05/2016]:
    -Switched to TWRP android-6.0 branch
    -Builded from cm-13.0 repo
    -New kernel made by me with latest LP sources

    CHANGELOG for 2.8.7.0 [01/08/2015]:
    -Switched to TWRP android-5.1 branch
    -Builded from cm-12.1 repo
    -Updated kernel from cyanogenmod
    -Fixed brightness slider
    -Fixed SEANDROIDENFORCE warning at boot

    CHANGELOG for 2.8.5.0 [15/02/2015]:
    -Fixed problem when wiping Data partition in F2FS

    CHANGELOG for 2.8.4.0 [07/02/2015]:
    -Added rewrite of TWRP settings after a SD wipe (prevent lost settings)
    -Fixed mount F2FS or others filesystems to system, data, cache partitions
    -Updated with latest changes from source

    CHANGELOG for 2.8.4.0 [24/01/2015]:
    -Switched to TWRP android-5.0 branch
    -Brightness slider still does not work (it's a kernel related problem)

    CHANGELOG for 2.8.1.0 [24/01/2015]:
    -Updated kernel from cyanogenmod
    -Screen blink on boot is not longer present
    -Brightness slider no longer work (it's a kernel related problem)
    -Added chargeled - adapted for samsung devices

    CHANGELOG for 2.8.1.0 [27/11/2014]:
    -Enabled mass storage mounting for external sd
    -Fixed MTP mounting without external sd

    CHANGELOG for 2.8.1.0:
    -Initial TWRP release for I9506 (ks01lte)


    How to do for install it:
    FIRST INSTALL FROM ODIN (v3.07 or higher):
    -Download twrp .TAR.MD5 file.
    -Go to download mode (Volume down + Home + Power)
    -Open Odin and check AutoReboot and F.Reset Time checkboxes are selected, also Re-Partition it NOT selected.
    -Click on AP (PDA) and select the downloaded twrp recovery tar.md5 file.
    -Check if all options are corrects, and press Start.
    -Once the installation process complete, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

    -Some users has found problems with previous procedure: in this unlucky situation, when phone reboot and the logo (i9506 Samsung S4 Galaxy) appear, pull out the battery. Don't panic, the logo is there for several seconds. The installation process should be finalized now. There will be no PASS status in Odin. Put back the battery in the phone and try to boot straight to recovery.

    UPGRADE YOUR TWRP:
    -Download twrp .ZIP file.
    -Copy the recovery zip file in the internal SD or external SD.
    -Go to recovery mode (Volume up + Home + Power)
    -Touch the INSTALL button.
    -Select the appropriate SD
    -Select the twrp file copied previously and slide to flash.
    -Press back some times and reboot.


    DOWNLOAD:
    You can dowload the current version from this folder, you will find the flashable zip and tar version.
    CLICK HERE TO GET DOWNLOAD FOLDER

    To download Odin go here: samsungodin.com

    SOURCES:
    TWRP Source: https://github.com/omnirom/android_bootable_recovery
    Kernel Source: https://github.com/CastagnaIT/android_kernel_samsung_ks01lte
    Device Source: https://github.com/CastagnaIT/android_device_samsung_ks01lte


    Thanks to: CyanogenMod, OmniRom Team, TWRP Team, Dees_Troy, Solk2, DualJoe​

    XDA:DevDB Information
    TWRP, Tool/Utility for the Samsung Galaxy S4

    Contributors
    CastagnaIT, smeroni68

    Version Information
    Status: Stable
    Current Stable Version: v3.1.0-0
    Stable Release Date: 2017-04-04

    Created 2014-11-16
    Last Updated 2017-07-15
    11
    --new updates--

    Hi there,
    after long time i'm back for a new update!:)
    this is the changelog:

    CHANGELOG for 2.8.7.0 [01/08/2015]:
    -Switched to TWRP android-5.1 branch
    -Builded from cm-12.1 repo
    -Updated kernel from cyanogenmod
    -Fixed brightness slider
    -Fixed SEANDROIDENFORCE warning at boot

    good day boys
    9
    For all user of TWRP:

    I and Dev are testing the new version v2.8.6.0 of TWRP... it is compiled still on KK environment.
    Dev will try this week to recompile on LP base (due to new sources updated on kernel LP), and in case of success, we will update OP with the new version... stay tuned...
    8
    --new updates--

    Hi there!
    a new little updates see below the changes
    bye!;)

    CHANGELOG for 2.8.4.0 [07/02/2015]:
    -Added rewrite of TWRP settings after a SD wipe (prevent lost settings)
    -Fixed mount F2FS or others filesystems to system, data, cache partitions
    -Updated with latest changes from source
    6
    --new updates--

    Only a quick update, the most important i fixed the MTP mount for internal storage when external SD isn't present, that before seemed not work properly.
    All the changelog below.

    CHANGELOG for 2.8.1.0 [27/11/2014]:
    -Enabled mass storage mounting for external sd (CastagnaIT)
    -Fixed MTP mounting without external sd (CastagnaIT)
    -Various other bugfixes and tweaks by twrp team

    Bye
    CastagnaIT