• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[Recovery] [Locked Bootloader Only] Safestrap Recovery V3.1 [01/04 3.12]

Search This thread

Hashcode

Senior Recognized Developer
Sep 3, 2011
3,426
23,731
SAFESTRAP v3.12 (2nd-System Bootstrap / Recovery)

** INSERT STANDARD DISCLAIMER: I'm not responsible for any damage you do to your phone using my tools. Always have a fastboot available for disaster recovery. **

Download the APK Installer Here for "RAZR-HD/ATRIX-HD"
md5sum: 9b3d75e84c06d1e71af1bf1bad57faf3
FOLLOW THESE INSTRUCTIONS: How to Safestrap

NOTES:
  • ROMS based on Android 4.2.1 *MUST* go into rom-slot1 currently. This will be fixed in the future.

CHANGES:
  • [01/04] (3.12) Fix initial file selector location for backup/restore
  • [12/29] (3.11) Allow use of custom updater-binary in .zip files for flashing on stock ROM (virtual slots still use prebuilt updater-binary in recovery).
  • [12/29] (3.11) BUGFIX: Fixed fake flash error at the end of a .zip install. (No real error, .zip installs fine)
  • [12/29] (3.10) Early support for booting custom ROMs on stock partitions. * STILL TESTING -- BUGGY*
  • [12/29] (3.10) Enable flashing to stock ROM
    • After .zip installations, nandroid restore or system wipe on the stock ROM: the current Safestrap files are restored to the system partition (Doesn't include the APK in /data -- so if you're restoring an old backup, be sure to update the Safestrap APK)
    • During the Safestrap files restore a check is done to be sure there are minimal files on /system to re-enter Safestrap
  • [12/27] (3.07) Bugfix: missed some changes in Safestrap 3.06
  • [12/26] (3.06) Bugfix/Update for JB4.1 OTA for DroidRAZR (Non-JB devices can also use)
  • [10/17] (3.05) Fixed SD card / emmc sharing in recovery (UMS)
  • [10/17] (3.05) Fixed recovery installation/removal from ROM-slots
  • [10/14] Updated to v3.04 BETA.
  • [10/14] Recovery is now based off TWRP 2.2.2.1 (fully featured touch-based recovery)
  • [10/14] Can create up to 4 Virtual ROM-slots to flash ROMs to and when "Active" ALL TWRP functions affect that ROM-slot (For example: Flashing .zips, Backup and Restore)
  • [10/14] Nearly instant swapping from ROM to ROM
  • [10/14] User selectable data partition sizes during ROM slot creation: 1GB, 2GB or 3GB
  • [10/14] ROM slots are saved on the internal emmc space so that preinstall and webtop partitions are no longer used and shouldn't break OTAs.
  • [10/14] Charging in recovery
  • [10/14] Supports "Reboot Recovery" from Android OS
Entry to recovery via Splashscreen on boot-up. The screen stays up for around 8-10 seconds and if you hit the menu button, it takes you to Safestrap Recovery.


SPECIAL THANKS TO:
  • The entire TWRP team who has built an AMAZING recovery system.
  • The testers which have helped in past and present versions of Safestrap, knowing that it could mean they brick their devices.
As always, let me know what you think!
 
Last edited:

ATGAdmin

Senior Member
Feb 25, 2012
1,368
1,059
Western NY State
www.nyspctech.com
Just did a backup myself

Yes but restore of data was still broke last I knew. ;)

Sent from my A200 using xda premium

---------- Post added at 12:22 AM ---------- Previous post was at 12:12 AM ----------

Hash said no data restore as of yet, but he's working on it. So DO NOT RESTORE DATA!!

Sent from my A200 using xda premium
 

wildchild048

Senior Member
Feb 16, 2010
353
58
tremont
When I try to open safe strap I keep getting unfortunately safe strap has stopped could this be because I lost root?

Sent from my MB886 using xda app-developers app
 

popfan

Senior Member
Jan 26, 2011
864
250
So this will allow us to make custom roms with out the need of a signature on is?
 

Neroga

Senior Member
Feb 7, 2012
1,486
803
29
Saint Cloud, Florida
I would assume so lol. After all, it's a custom recovery but without the need for an unlocked bootloader.

Sent from my Jellybeaned Motorola Atrix HD MAXX
 

sounreal

Senior Member
Feb 23, 2009
163
8
Belleville
So how do I combine and or remap the partitions so that I only have one internal storage and have my mirco SD card actually functions as a normal micro SD card the same way they work on the atrix 4g and atrix2?
 

Hashcode

Senior Recognized Developer
Sep 3, 2011
3,426
23,731
Shouldn't need to do anything special to the SD cards. Just go into "Boot Options" select a rom-slot and follow the creation instructions.

Choose 1GB data for now unless you're a heavy app users and need more space (100+ apps).
 

ATGAdmin

Senior Member
Feb 25, 2012
1,368
1,059
Western NY State
www.nyspctech.com
I would assume so lol. After all, it's a custom recovery but without the need for an unlocked bootloader.

Sent from my Jellybeaned Motorola Atrix HD MAXX

Actually you can't install custom ROMs as of yet. That feature is not working at this time. The only thing you can do is backup and restore your /system. Do not attempt to backup and restore data! ;)

Sent from my A200 using xda premium
 

sounreal

Senior Member
Feb 23, 2009
163
8
Belleville

Top Liked Posts

  • There are no posts matching your filters.
  • 45
    SAFESTRAP v3.12 (2nd-System Bootstrap / Recovery)

    ** INSERT STANDARD DISCLAIMER: I'm not responsible for any damage you do to your phone using my tools. Always have a fastboot available for disaster recovery. **

    Download the APK Installer Here for "RAZR-HD/ATRIX-HD"
    md5sum: 9b3d75e84c06d1e71af1bf1bad57faf3
    FOLLOW THESE INSTRUCTIONS: How to Safestrap

    NOTES:
    • ROMS based on Android 4.2.1 *MUST* go into rom-slot1 currently. This will be fixed in the future.

    CHANGES:
    • [01/04] (3.12) Fix initial file selector location for backup/restore
    • [12/29] (3.11) Allow use of custom updater-binary in .zip files for flashing on stock ROM (virtual slots still use prebuilt updater-binary in recovery).
    • [12/29] (3.11) BUGFIX: Fixed fake flash error at the end of a .zip install. (No real error, .zip installs fine)
    • [12/29] (3.10) Early support for booting custom ROMs on stock partitions. * STILL TESTING -- BUGGY*
    • [12/29] (3.10) Enable flashing to stock ROM
      • After .zip installations, nandroid restore or system wipe on the stock ROM: the current Safestrap files are restored to the system partition (Doesn't include the APK in /data -- so if you're restoring an old backup, be sure to update the Safestrap APK)
      • During the Safestrap files restore a check is done to be sure there are minimal files on /system to re-enter Safestrap
    • [12/27] (3.07) Bugfix: missed some changes in Safestrap 3.06
    • [12/26] (3.06) Bugfix/Update for JB4.1 OTA for DroidRAZR (Non-JB devices can also use)
    • [10/17] (3.05) Fixed SD card / emmc sharing in recovery (UMS)
    • [10/17] (3.05) Fixed recovery installation/removal from ROM-slots
    • [10/14] Updated to v3.04 BETA.
    • [10/14] Recovery is now based off TWRP 2.2.2.1 (fully featured touch-based recovery)
    • [10/14] Can create up to 4 Virtual ROM-slots to flash ROMs to and when "Active" ALL TWRP functions affect that ROM-slot (For example: Flashing .zips, Backup and Restore)
    • [10/14] Nearly instant swapping from ROM to ROM
    • [10/14] User selectable data partition sizes during ROM slot creation: 1GB, 2GB or 3GB
    • [10/14] ROM slots are saved on the internal emmc space so that preinstall and webtop partitions are no longer used and shouldn't break OTAs.
    • [10/14] Charging in recovery
    • [10/14] Supports "Reboot Recovery" from Android OS
    Entry to recovery via Splashscreen on boot-up. The screen stays up for around 8-10 seconds and if you hit the menu button, it takes you to Safestrap Recovery.


    SPECIAL THANKS TO:
    • The entire TWRP team who has built an AMAZING recovery system.
    • The testers which have helped in past and present versions of Safestrap, knowing that it could mean they brick their devices.
    As always, let me know what you think!
    9
    Yes but restore of data was still broke last I knew. ;)

    Sent from my A200 using xda premium

    ---------- Post added at 12:22 AM ---------- Previous post was at 12:12 AM ----------

    Hash said no data restore as of yet, but he's working on it. So DO NOT RESTORE DATA!!

    Sent from my A200 using xda premium

    New version is up and should be ok for data restore. Please let me know.

    Also, and this probably won't work for the AHD, but I created a Motoblur 9.1.39 ROM-base (flashable .zip):
    http://goo.im/devs/Hashcode/vanquish/motoblur-9.1.39-vanquish.zip

    This should also be possible for the AHD with a bit of work / testing. Much easier than backup/restore process to get the stock ROM on a rom-slot.
    5
    Edited the title to include "[Locked Bootloader Only]" for clarification.
    4
    Just got done having a chat with HashCode, and you can now flash ROMs via a ROM slot, so we should start seeing ROMs here in the DEV section soon!
    For all you creating ROMs, download HashCode's ROM in the OP, and take a look at his updaterscript for reference, as it may be a bit different than you're used to.
    I know HashCode doesn't ask for donations, but he does have a donation link right under his name on the OP. Break out your credit/debit cards and show your appreciation for him and all he's done and continues to do for our community, for without him, we'd have NO recovery, and y'all would be twiddling your thumbs with stock ROMs!
    Big shout out THANK YOU to HachCode! ;)


    Sent from my A200 using xda premium
    3
    Updated OP w/ Safestrap v3.12:

    Download the APK Installer Here for "RAZR-HD/ATRIX-HD"
    md5sum: 9b3d75e84c06d1e71af1bf1bad57faf3
    FOLLOW THESE INSTRUCTIONS: How to Safestrap

    NOTES:
    • ROMS based on Android 4.2.1 *MUST* go into rom-slot1 currently. This will be fixed in the future.
    CHANGES:
    • [01/04] (3.12) Fix initial file selector location for backup/restore
    • [12/29] (3.11) Allow use of custom updater-binary in .zip files for flashing on stock ROM (virtual slots still use prebuilt updater-binary in recovery).
    • [12/29] (3.11) BUGFIX: Fixed fake flash error at the end of a .zip install. (No real error, .zip installs fine)
    • [12/29] (3.10) Early support for booting custom ROMs on stock partitions. * STILL TESTING -- BUGGY*
    • [12/29] (3.10) Enable flashing to stock ROM
      • After .zip installations, nandroid restore or system wipe on the stock ROM: the current Safestrap files are restored to the system partition (Doesn't include the APK in /data -- so if you're restoring an old backup, be sure to update the Safestrap APK)
      • During the Safestrap files restore a check is done to be sure there are minimal files on /system to re-enter Safestrap
    • [12/27] (3.07) Bugfix: missed some changes in Safestrap 3.06
    • [12/26] (3.06) Bugfix/Update for JB4.1 OTA for DroidRAZR (Non-JB devices can also use)