• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[RECOVERY][MI9] TWRP 3.3.1-8 by siankatabg

Search This thread

reg66

Senior Member
Jan 7, 2007
2,154
612
Xiaomi Poco F3
Hi guys i just flash with adb this recovery but when i try to enter on recovery i always see stock recovery
I write on cmd fastboot flash recovery and the path. I missed anything?
Don't use commands to boot to twrp after flashing, use buttons. Hold vol up and power together until phone reboots then let go of power when it vibrates, but keep holding vol up until twrp boots
 

reg66

Senior Member
Jan 7, 2007
2,154
612
Xiaomi Poco F3
It works after flashing but if i turn off my phone and try to enter on recovery i always am on stock recovery.
Twrp also have data encryped...could anyone help me?
Read my post above. Flash twrp using commands, do not disconnect yet from pc, hold volume up and power button together for about 4 or 5 seconds until it reboots, once the phone vibrates let go of power button but keep holding volume up until it boots into twrp. Then you can disconnect from pc and twrp will be permanent
 
Read my post above. Flash twrp using commands, do not disconnect yet from pc, hold volume up and power button together for about 4 or 5 seconds until it reboots, once the phone vibrates let go of power button but keep holding volume up until it boots into twrp. Then you can disconnect from pc and twrp will be permanent

Try it but after reboot still stock recovery
 

VladV1V

Senior Member
Mar 26, 2018
300
114

Myself-

Senior Member
Jan 10, 2009
110
4
Hi after flashing your TWRP; I cannot start my phone and
I used the command fastboot boot twrp3,3,1-1.img

I tried the same method with twrp 3,3,1-8 but after rebooting it goes back twrp3,3,1-1.img

---------- Post added at 03:03 ---------- Previous post was at 02:46 ----------

Anyone to help?
 

ceLL1338x

Member
Apr 3, 2019
5
0
ive got an Xiaomi Mi 9 and got some problems with installing magisk. Ive read in some forums, that i need a treble compatible TWRP version for my Xiaomi Mi 9 - how do i get this?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 43
    Yet another TWRP for MI9 :)


    TWRP compiled from the latest omnirom 9.0 branch with decryption and opengapps support!


    * During the testing "treble compatibility check" was disabled for supporting flashing the MIUI Global ROM, GSI's were also tested along with opengapps (you still need to manually flash vbmeta and resize the system partition).



    Please give me your feedback, as I can't test all the things out there!

    As always: Use on your own risk, nothing here is guaranteed to work!



    Works:
    - ADB
    - Decryption of /data (TESTED ONLY WITH PATTERN)
    - Screen brightness settings
    - Correct screenshot color
    - MTP
    - Flashing (opengapps, roms, images, magisk and so on)
    - Backup/Restore (Needs more testing)
    - USB-OTG
    ...


    TO-DO:
    - Vibration support



    Changelog:
    v1:
    * Initial release

    v2:
    * TWRP will now auto resize the system partition when it detects you're trying to flash opengapps
    * Assert error issue flashing some roms (ie - error 7 : This package is for "cepheus" devices, this is a "") should be fixed now (NOT TESTED - so please let me know)

    v3:
    * Assert error issue flashing some roms (ie RevolutionOS - error 7 : This package is for "cepheus" devices, this is a "") should be fixed now

    v4:
    * Fixed USB-OTG

    v5 (Third try, but this time I'm 100% sure it works as I flashed it):
    * Assert error issue flashing some roms (ie RevolutionOS - error 7 : This package is for "cepheus" devices, this is a "") should be fixed now

    v6:
    * TWRP should now detect any gapps package and auto resize the system partition (opengapps, mindthegapps and so on...)

    v7:
    * Back to busybox for better compatibility with some old zips

    v8:
    * Updated to latest omni-twrp source code
    * Android Q decryption support
    * DTBO Image flashing support added
    * PERSIST Image flashing support added
    * F2FS support (not tested)
    * PITCH BLACK theme included (created by me, inspired by a theme of a friend from the op5 days)

    Download:
    https://www.androidfilehost.com/?w=files&flid=294801


    Source code:
    https://github.com/siankatabg/android_device_xiaomi_cepheus-twrp


    Credits:
    The hard work did - @mauronofrio and @PeterCxy , so thanks to them
    20
    Update - TWRP 3.3.1-8


    Changelog:

    * Updated to latest omni-twrp source code (finally everything needed for our device support is merged, so expect OFFICIAL TWRP soon (probably from mauro:good: ))
    * Android Q decryption support
    * DTBO Image flashing support added
    * PERSIST Image flashing support added
    * F2FS support (not tested)
    * PITCH BLACK theme included (created by me, inspired by a theme of a friend from the op5 days)

    (Still busybox and disabled compatibility check are included (for compatibility and global meme rom flashing))


    Source code was updated, downloads in the first post, have fun and let me know if you find any issue :)
    13
    New build is up! (v6)

    Changelog:
    * TWRP should now detect any gapps package and auto resize the system partition (opengapps, mindthegapps and so on...)


    Have fun :) And sorry for the hundred releases today...
    11
    Just FYI, few hours ago I did few backups and few restores (for testing) of the latest .eu ROM and all went fine (backup, restoring all partitions and booting it). But I also have a question, do you guys want my own black theme to be included in the next release? I did that theme for myself and used it for more than an year privately (never did a public release with it), but why not now, I like this community (the oneplus community was cancerous af, so I never had that thing in my mind) :)

    I'm attaching few screens for you to decide.
    10
    New build is up! (v7)

    Changelog:
    * Back to busybox for better compatibility with some old zips (test and report please)

    Have fun :)