• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[RECOVERY][OFFICIAL][3.5.0-x] TWRP for Galaxy Note 10/+/5G Exynos

Search This thread

corsicanu

Recognized Developer
May 25, 2012
1,941
12,958
Bucuresti
Ae08b8N.png


Official TWRP 3.5.0-* For Galaxy Note 10/+/5G
Only for exynos variants - N970F / N975F / N976B (Europe - Global, Single/Dual-SIM), N971N, N976N (South Korea)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.


Kernel Features:
  • latest kernel source release
  • disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
  • spoofed config for firmware checks
Recovery Features:
  • built in full 64 mode
  • toybox/busybox support
  • compatible with Android 10.0 and above
Downloads:
Instructions:
Odin (Windows)

Prerequisites: Samsung USB drivers, Odin v3.14.1
If you already have the bootloader unlocked you can skip to step 6.

  1. Make sure OEM Unlock is ON in developer settings;
  2. Turn off the phone;
  3. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
  4. Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
    * Please be aware all your data will be erased including internal storage and phone will reboot!!
  5. Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
  6. Make sure OEM Unlock is ON in developer settings;
  7. Turn off the phone;
  8. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
    * If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
  9. Download appropriate TWRP .tar file according to your device
  10. Download avb disabled vbmeta .tar
  11. Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock firmware
  • In TWRP home screen press wipe - format data - yes
  • Download and flash multidisabler-samsung-2.* zip to disable security and encryption.

Heimdall (Linux)
Install heimdall & additional required packages:
Code:
sudo apt-get update
sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
If you already have the bootloader unlocked you can skip to step 6.

  1. Make sure OEM Unlock is ON in developer settings;
  2. Turn off the phone;
  3. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
  4. Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
    * Please be aware all your data will be erased including internal storage and phone will reboot!!
  5. Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
  6. Make sure OEM Unlock is ON in developer settings;
  7. Turn off the phone;
  8. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
    * If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
  9. Download appropriate TWRP .img file according to your device
  10. Download avb disabled vbmeta .img
  11. Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
    Code:
    sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
    and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock firmware
  • In TWRP home screen press wipe - format data - yes
  • Download and flash multidisabler-samsung-2.* zip to disable security and encryption.

TWRP

  • Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery

dd (Requires root)

  • Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
    Code:
    su
    dd if=/sdcard/twrp.img of=/dev/block/platform/13d60000.ufs/by-name/recovery
!! Only if coming from full stock (magisk patched) firmware
  • In TWRP home screen press wipe - format data - yes
  • Download and flash multidisabler-samsung-2.* zip to disable security and encryption.

Sources:
Credits:
  • TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
 
Last edited:

corsicanu

Recognized Developer
May 25, 2012
1,941
12,958
Bucuresti
Compatibility and changelog:
08.01.2021 - android 11 support
  • Security patch: 2020-12-01
  • Compatibility: only ETL* firmwares, OneUI 3.0
27.12.2020 - TWRP 3.5.0 bringup - december release
  • Security patch: 2020-12-01
  • Compatibility: only DTK* and DTL* firmwares
09.12.2020 - december release
  • Security patch: 2020-12-01
  • Compatibility: only DTK* and DTL* firmwares
05.12.2020 - Initial release
  • Security patch: 2020-11-01
  • Compatibility: DTJ* firmwares
Misc links:
Further reading:
 
Last edited:

corsicanu

Recognized Developer
May 25, 2012
1,941
12,958
Bucuresti
FAQ
Q: Can i use this recovery with other firmware then mentioned in compatibility?
A: Only with same Android version and only if you don't plan to boot rooted with TWRP (some kernels deliver root prebuilt in kernel), or Rollback protection will kick in and you won't be able to pass the lockscreen.

Q: Where do i get vbmeta.img?
A: From here, download the one you need according to install instructions.

Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition.

Q: Phone is not booting even after 20 minutes
A: Try to reboot. If still not booting, make sure you flashed multidisabler zip / formatted data partition.

Q: How to format data partition?
A:
ymlnQUE.jpg


Q: Phone is showing only Samsung logo
A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware. If you still don't succeed, post here some details about your device and previous firmware and we might be able to help.

Q: Why do i need to format data partition?
A: Because old firmware encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.
 

GoJo ^^

Senior Member
Dec 2, 2011
3,370
170
Hi, i'm getting the Note 10 soon & remember when i've tested the S10 months ago that i had trouble with twrp encryption/decryption : can you confirm after wiping data that you can encrypt it (system) and twrp will be able to decrypt it after you enter your pattern..? Thanks.
 

corsicanu

Recognized Developer
May 25, 2012
1,941
12,958
Bucuresti
Android 11 TWRP is up already for a while, in case you didn't notice it yet grab it from twrp.me.
Don't forget to use targeted TWRP for your android version and release, read more about compatibility in second post of this thread.
PS: N971N does not have a build compatible with OneUI 3.0 since no public release of that yet, it will be built once samsung starts pushing the update for that phone.
Regards!
 

jinogungon

Member
Sep 1, 2011
39
7
Android 11 TWRP is up already for a while, in case you didn't notice it yet grab it from twrp.me.
Don't forget to use targeted TWRP for your android version and release, read more about compatibility in second post of this thread.
PS: N971N does not have a build compatible with OneUI 3.0 since no public release of that yet, it will be built once samsung starts pushing the update for that phone.
Regards!
is the latest TWRP 3.5.0_9-4-d1 compatible with the latest Samsung ROM update? Below are the details of the firmware update I'm referring to:

ModelSM-N970F
Model nameGalaxy Note 10
VersionAndroid 11
Changelist21054212
Build dateThu, 18 Feb 2021 05:15:51 +0000
Security Patch Level2021-03-01
Product codeXTC
PDAN970FXXU6FUBD
CSCN970FOXM6FUBD

Thanks in advance!

Edit: based on this article it's One UI 3.1
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    Ae08b8N.png


    Official TWRP 3.5.0-* For Galaxy Note 10/+/5G
    Only for exynos variants - N970F / N975F / N976B (Europe - Global, Single/Dual-SIM), N971N, N976N (South Korea)
    Disclaimer
    I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
    Please do some research if you have any concerns about features included in this recovery before flashing it!
    YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.


    Kernel Features:
    • latest kernel source release
    • disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
    • spoofed config for firmware checks
    Recovery Features:
    • built in full 64 mode
    • toybox/busybox support
    • compatible with Android 10.0 and above
    Downloads:
    Instructions:
    Odin (Windows)

    Prerequisites: Samsung USB drivers, Odin v3.14.1
    If you already have the bootloader unlocked you can skip to step 6.

    1. Make sure OEM Unlock is ON in developer settings;
    2. Turn off the phone;
    3. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
    4. Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
      * Please be aware all your data will be erased including internal storage and phone will reboot!!
    5. Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
    6. Make sure OEM Unlock is ON in developer settings;
    7. Turn off the phone;
    8. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
      * If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
    9. Download appropriate TWRP .tar file according to your device
    10. Download avb disabled vbmeta .tar
    11. Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
    !! Only if coming from full stock firmware
    • In TWRP home screen press wipe - format data - yes
    • Download and flash multidisabler-samsung-2.* zip to disable security and encryption.

    Heimdall (Linux)
    Install heimdall & additional required packages:
    Code:
    sudo apt-get update
    sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
    If you already have the bootloader unlocked you can skip to step 6.

    1. Make sure OEM Unlock is ON in developer settings;
    2. Turn off the phone;
    3. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
    4. Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
      * Please be aware all your data will be erased including internal storage and phone will reboot!!
    5. Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
    6. Make sure OEM Unlock is ON in developer settings;
    7. Turn off the phone;
    8. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
      * If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
    9. Download appropriate TWRP .img file according to your device
    10. Download avb disabled vbmeta .img
    11. Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
      Code:
      sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
      and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
    !! Only if coming from full stock firmware
    • In TWRP home screen press wipe - format data - yes
    • Download and flash multidisabler-samsung-2.* zip to disable security and encryption.

    TWRP

    • Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery

    dd (Requires root)

    • Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
      Code:
      su
      dd if=/sdcard/twrp.img of=/dev/block/platform/13d60000.ufs/by-name/recovery
    !! Only if coming from full stock (magisk patched) firmware
    • In TWRP home screen press wipe - format data - yes
    • Download and flash multidisabler-samsung-2.* zip to disable security and encryption.

    Sources:
    Credits:
    • TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
    5
    Compatibility and changelog:
    08.01.2021 - android 11 support
    • Security patch: 2020-12-01
    • Compatibility: only ETL* firmwares, OneUI 3.0
    27.12.2020 - TWRP 3.5.0 bringup - december release
    • Security patch: 2020-12-01
    • Compatibility: only DTK* and DTL* firmwares
    09.12.2020 - december release
    • Security patch: 2020-12-01
    • Compatibility: only DTK* and DTL* firmwares
    05.12.2020 - Initial release
    • Security patch: 2020-11-01
    • Compatibility: DTJ* firmwares
    Misc links:
    Further reading:
    4
    FAQ
    Q: Can i use this recovery with other firmware then mentioned in compatibility?
    A: Only with same Android version and only if you don't plan to boot rooted with TWRP (some kernels deliver root prebuilt in kernel), or Rollback protection will kick in and you won't be able to pass the lockscreen.

    Q: Where do i get vbmeta.img?
    A: From here, download the one you need according to install instructions.

    Q: TWRP can't mount data partition, what to do?
    A: Make sure you formatted data partition.

    Q: Phone is not booting even after 20 minutes
    A: Try to reboot. If still not booting, make sure you flashed multidisabler zip / formatted data partition.

    Q: How to format data partition?
    A:
    ymlnQUE.jpg


    Q: Phone is showing only Samsung logo
    A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware. If you still don't succeed, post here some details about your device and previous firmware and we might be able to help.

    Q: Why do i need to format data partition?
    A: Because old firmware encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.
    3
    official builds will be up in few hours