[RECOVERY][OFFICIAL][3.6.1-x] TWRP for Galaxy Note 10/+/5G Exynos

Search This thread

GXW3

New member
Nov 20, 2021
4
0
저는 한국에 살고 있는 17세 학생입니다. Sm-N976NNKOU2FUK1 개발은 아직 멀었나요? 궁금해서 여쭤봅니다. 아무리 찾아봐도 한국판은 잘 안보이네요. 라우팅을 시도하고 싶지만 정확하지 않다는 것을 알 수 있습니다.
 

corsicanu

Recognized Developer
저는 한국에 살고 있는 17세 학생입니다. Sm-N976NNKOU2FUK1 개발은 아직 멀었나요? 궁금해서 여쭤봅니다. 아무리 찾아봐도 한국판은 잘 안보이네요. 라우팅을 시도하고 싶지만 정확하지 않다는 것을 알 수 있습니다.
First of all, please use english next time.
For your N976N phone you can use N976B TWRP, it's the same phone.
Keep in mind that 3.6.0_9-2 is Android 12 exclusive, for N976NKOU2FUK1 you need to use 3.6.0_9-0 version from here.
 
  • Like
Reactions: blackhawk_LA

GXW3

New member
Nov 20, 2021
4
0
I think I'm a fool. I think I've been mistaken. I haven't been looking for root files, but I've been looking for TWRP files. I should've found a Korean root file. If you know the site where you can find the root file, can you give me a link? Please.
 

GXW3

New member
Nov 20, 2021
4
0
내가 쓴 모든 것이 번역되었습니다. 나는 영어에 대해 잘 모릅니다.
 

GXW3

New member
Nov 20, 2021
4
0
I think I'm a fool. I think I've been mistaken. I haven't been looking for root files, but I've been looking for TWRP files. I should've found a Korean root file. If you know the site where you can find the root file, can you give me a link? Please.
 

ElCoyote_

Member
Nov 6, 2017
13
3
Hi, I just got a 2nd hand SGN10+ 5G (SM-N976B). I'm a long time user of LOS (since LOS 14) and TWRP on all of my phones.
I updated this like-new SGN10+ to:
- Bootload unlocked.
- LOS recovery installed
- LOS 19.1 installed.

However, I do not like the LOS recovery all that much and would much rather run TWRP but I found this page with a huge warning:
What does this pre-root TWRP process entails? How does one do that?
Will I still be able to update LOS using OTA if I flash TWRP that way?

Thank you for enlightening me.. I've never had to do this on any of my previous LOS devices (Xiaomi mi mix, SG Note 3, SG S7, etc..)
 

w41ru5

Senior Member
Jul 17, 2017
728
368
55
Hi, I just got a 2nd hand SGN10+ 5G (SM-N976B). I'm a long time user of LOS (since LOS 14) and TWRP on all of my phones.
I updated this like-new SGN10+ to:
- Bootload unlocked.
- LOS recovery installed
- LOS 19.1 installed.

However, I do not like the LOS recovery all that much and would much rather run TWRP but I found this page with a huge warning:
What does this pre-root TWRP process entails? How does one do that?
Will I still be able to update LOS using OTA if I flash TWRP that way?

Thank you for enlightening me.. I've never had to do this on any of my previous LOS devices (Xiaomi mi mix, SG Note 3, SG S7, etc..)
Mister LOS doesn't like to date Miss TWRP, much less to kiss each other - technical details about which you will need to get informed more in detail, if you really want to understand. If you want to play with this rom, you need to really obey the instructions from the dev. Good luck.
 

Zimoss Azmi

New member
Jan 16, 2023
1
0
hi i have note 10+ 5G SM N976N cant flash through odin KG state Shown prenormal And i get error " only official binaries are flashed by Odin
can some one help i wanna get rid of stock firmware
 

cdrivex4

Senior Member
Jan 13, 2014
113
45
hi, have the sm-n970f/DS can u use "temp twrp" to remove screenlock without OEM unlock enabled. Forgot my pin and the phone cant be reset via "internet"..
 

prkfsz

Senior Member
Jun 16, 2020
186
57
Hi!
As with all developers, I am very gratefull for the time and energy you are spending on keeping our devices from recycling bin.. :)

Got me a N975f (d2s), Note 10+ that is. Tried the method via Odin. TWRP version 3.7.0_9-0 from the TWRP site that the dev linked to. Odin version 3.14.4, (tried also 3.13.3). The phone has recently been updated to the latest Android 12. Bootloader unlocked according to the first part of the instructions. I put the twrp-tar and the vbmeta-tar in their places (AP and CP in Odin respectively). The computer has been used for similar operations with Odin, altho perhaps not in a while. Odin recognizes the device and the proper 'added' message shows.
What happens when I press 'Start' is... pretty much nothing.. Odin shows message 'analyzing file' without anything else happening. Eventually i press volume down and power button to get out of it and restart.

Anyone can help point me towards solution? Would be very grateful.

Regard
 

elswerky

Senior Member
Dec 11, 2015
320
127
Realme 2 pro
8 flashed it ,,but when I flash magisk in twrp ,, after reboot and installing magisk manager ,it doesn't detect that magisk is flashed
 

prkfsz

Senior Member
Jun 16, 2020
186
57
Hi!
As with all developers, I am very gratefull for the time and energy you are spending on keeping our devices from recycling bin.. :)

Got me a N975f (d2s), Note 10+ that is. Tried the method via Odin. TWRP version 3.7.0_9-0 from the TWRP site that the dev linked to. Odin version 3.14.4, (tried also 3.13.3). The phone has recently been updated to the latest Android 12. Bootloader unlocked according to the first part of the instructions. I put the twrp-tar and the vbmeta-tar in their places (AP and CP in Odin respectively). The computer has been used for similar operations with Odin, altho perhaps not in a while. Odin recognizes the device and the proper 'added' message shows.
What happens when I press 'Start' is... pretty much nothing.. Odin shows message 'analyzing file' without anything else happening. Eventually i press volume down and power button to get out of it and restart.

Anyone can help point me towards solution? Would be very grateful.

Regard

Finally found the problem. There was something with the several newest TWRP versions i tried that just wouldn't be accepted by the phone. It was first when i tried the version 3.6.2_9-1 it finally worked. I haven't done other trials. But this could perhaps be of help to others that run into same problems.
 

oqaab

Senior Member
Sep 22, 2007
301
25
I have Note 10+ N975F/DS on Binary 8, I checked OEM unlock in Developer Mode but it still shows OEM locked in Odin mode. What to do?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 24
    Ae08b8N.png


    Official TWRP 3.6.1-* For Galaxy Note 10/+/5G
    Only for exynos variants - N970F / N975F / N976B (Europe - Global, Single/Dual-SIM), N971N, N976N (South Korea)
    Disclaimer
    I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
    Please do some research if you have any concerns about features included in this recovery before flashing it!
    YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.


    Kernel Features:
    • latest kernel source release
    • disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
    • spoofed config for firmware checks
    Recovery Features:
    • built in full 64 mode
    • toybox/busybox support
    • compatible with Android 10.0 and above
    Downloads:
    Instructions:
    Odin (Windows)

    Prerequisites: Samsung USB drivers, Odin v3.14.1
    If you already have the bootloader unlocked you can skip to step 6.

    1. Make sure OEM Unlock is ON in developer settings;
    2. Turn off the phone;
    3. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
    4. Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
      * Please be aware all your data will be erased including internal storage and phone will reboot!!
    5. Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
    6. Make sure OEM Unlock is ON in developer settings;
    7. Turn off the phone;
    8. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
      * If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
    9. Download appropriate TWRP .tar file according to your device
    10. Download avb disabled vbmeta .tar
    11. Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
    !! Only if coming from full stock firmware
    • In TWRP home screen press wipe - format data - yes
    • Download and flash multidisabler-samsung-3.* zip to disable security and encryption.

    Heimdall (Linux)
    Install heimdall & additional required packages:
    Code:
    sudo apt-get update
    sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
    If you already have the bootloader unlocked you can skip to step 6.

    1. Make sure OEM Unlock is ON in developer settings;
    2. Turn off the phone;
    3. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
    4. Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
      * Please be aware all your data will be erased including internal storage and phone will reboot!!
    5. Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
    6. Make sure OEM Unlock is ON in developer settings;
    7. Turn off the phone;
    8. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
      * If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
    9. Download appropriate TWRP .img file according to your device
    10. Download avb disabled vbmeta .img
    11. Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
      Code:
      sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
      and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
    !! Only if coming from full stock firmware
    • In TWRP home screen press wipe - format data - yes
    • Download and flash multidisabler-samsung-3.* zip to disable security and encryption.

    TWRP

    • Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery

    dd (Requires root)

    • Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
      Code:
      su
      dd if=/sdcard/twrp.img of=/dev/block/platform/13d60000.ufs/by-name/recovery
    !! Only if coming from full stock (magisk patched) firmware
    • In TWRP home screen press wipe - format data - yes
    • Download and flash multidisabler-samsung-3.* zip to disable security and encryption.

    Sources:
    Credits:
    • TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
    As always, if you like what i do, you can always send me some pizza/coffee/drugs/drinks or anything else via paypal.me/corsicanu
    16
    Compatibility and changelog:

    07.03.2022 - TWRP 3.6.1
    • Security patch: 2022-02-01
    • Compatibility: only GVA*/GVB* firmwares, OneUI 4.0

    09.01.2022 - android 12 support
    • Security patch: 2022-01-01
    • Compatibility: only GUL* firmwares, OneUI 4.0
    08.01.2021 - android 11 support
    • Security patch: 2020-12-01
    • Compatibility: only ETL* firmwares, OneUI 3.0
    27.12.2020 - TWRP 3.5.0 bringup - december release
    • Security patch: 2020-12-01
    • Compatibility: only DTK* and DTL* firmwares
    09.12.2020 - december release
    • Security patch: 2020-12-01
    • Compatibility: only DTK* and DTL* firmwares
    05.12.2020 - Initial release
    • Security patch: 2020-11-01
    • Compatibility: DTJ* firmwares
    Misc links:
    Further reading:
    12
    FAQ
    Q: Can i use this recovery with other firmware then mentioned in compatibility?
    A: Only with same Android version and only if you don't plan to boot rooted with TWRP (some kernels deliver root prebuilt in kernel), or Rollback protection will kick in and you won't be able to pass the lockscreen.

    Q: Where do i get vbmeta.img?
    A: From here, download the one you need according to install instructions.

    Q: TWRP can't mount data partition, what to do?
    A: Make sure you formatted data partition.

    Q: Phone is not booting even after 20 minutes
    A: Try to reboot. If still not booting, make sure you flashed multidisabler zip / formatted data partition.

    Q: How to format data partition?
    A:
    ymlnQUE.jpg


    Q: Phone is showing only Samsung logo
    A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware. If you still don't succeed, post here some details about your device and previous firmware and we might be able to help.

    Q: Why do i need to format data partition?
    A: Because old firmware encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.
    9
    official builds will be up in few hours
    6
    Android 11 TWRP is up already for a while, in case you didn't notice it yet grab it from twrp.me.
    Don't forget to use targeted TWRP for your android version and release, read more about compatibility in second post of this thread.
    Regards!