[RECOVERY][OFFICIAL][condor] TWRP 2.7.1.0 touch recovery

[obsidianuk]

Hey folks, nice to see a good Moto E community developing - Just got an XT1021 in the UK.

I've rooted and got TWRP installed (got mismatched partition size on install...?)
TWRP seems to run fine - able to install supersu, but trying to make a TWRP backup I get the error message-> unable to mount E:

Any suggestions?

 

[DarkSideTT]

What was said about unified building is correct. It's whether I will get reliable testers for that version

Sent from my Nexus 7 using Tapatalk

if you want, i help u testing this version in my XT1025

Hey folks, nice to see a good Moto E community developing - Just got an XT1021 in the UK.

I've rooted and got TWRP installed (got mismatched partition size on install...?)
TWRP seems to run fine - able to install supersu, but trying to make a TWRP backup I get the error message-> unable to mount E:

Any suggestions?

Try this, i think you're using the older version

http://d-h.st/1Zp

 

[g33kparineeti]

What was said about unified building is correct. It's whether I will get reliable testers for that version

Sent from my Nexus 7 using Tapatalk

@cybojenix, getting testers won't be a problem.... This is the least we can do for Recognized Devs as you....
I can be a tester and I can vouch if you have a release, you'll get hundred others....
FYI, I've got XT1022 dual sim variant from India....
These makes all 3 variants available in this thread....:highfive:

 

[DarkSideTT]

@cybojenix, getting testers won't be a problem.... This is the least we can do for Recognized Devs as you....
I can be a tester and I can vouch if you have a release, you'll get hundred others....
FYI, I've got XT1022 dual sim variant from India....
These makes all 3 variants available in this thread....:highfive:

Nice.
Waiting for initial release

 

[obsidianuk]

if you want, i help u testing this version in my XT1025



Try this, i think you're using the older version

http://d-h.st/1Zp

DarkSideTT - its v1.2 which I had installed - I've double checked it is the same - I downloaded the file yesterday from the link in the OP, and the file bite size is exactly the same!

Any other ideas?

 

[DarkSideTT]

DarkSideTT - its v1.2 which I had installed - I've double checked it is the same - I downloaded the file yesterday from the link in the OP, and the file bite size is exactly the same!

Any other ideas?

Open TWRP> Mount > mark "Micro SDcard"

or

Check if you have space to make backup, recommend 2GB+

 

[obsidianuk]

Open TWRP> Mount > mark "Micro SDcard"

or

Check if you have space to make backup, recommend 2GB+

Tried those - the sd card was already mounted.

What ive found is when you go to backup there is a grey button that says "Storage: (0 MB)". I can press on it to select internal storage or micro sd card...When i choose micro sd card it then works fine.

Thanks a lot for helping me solve it, was very simple really - its due to me never using TWRP; im a CWM user on my other devices

 

[DarkSideTT]

Tried those - the sd card was already mounted.

What ive found is when you go to backup there is a grey button that says "Storage: (0 MB)". I can press on it to select internal storage or micro sd card...When i choose micro sd card it then works fine.

Thanks a lot for helping me solve it, was very simple really - its due to me never using TWRP; im a CWM user on my other devices

 

[TheStrix]

I too can be the tester for CM11 :highfive:

 

[g33kparineeti]

Android 4.4.3 is live... Hope CM 11 hits stable soon...:fingers-crossed:

I don't believe CM will stick with M releases... CM was waiting for the 4.4.3 to hit stable...

 

[manos78]

Hi,

Any ETA about the fix of the "touch bug" (only after screen power off)?

If someone do the port of CWM (only keys, no touch) this problem fixes automatically. in my opinion CWM is superior to TWRP.

 

[g33kparineeti]

If someone do the port of CWM (only keys, no touch) this problem fixes automatically. in my opinion CWM is superior to TWRP.

+1, I agree with you... I too prefer CWM...
The OP of this thread told me that he could build CWM in an hour if I requested him... But I haven't heard anything from him since then...

 

[Level99]

Works on XT1023.

 

[Moscow Desire]

Ok Folks, things were starting to get a little out of control, as some "other" started to chime in with "his" 2 cents worth (mo no know why folks do this when the issue was settled".

Of course we Mods appreciate the politeness some of you all used.

Ahemm.... (now, where was I... oh yeah..)

XDA Rules dictate that Off Topic should be limited. Posts should be related to the topic of the thread. You all know this.

XDA rules "also" prohibit the use of derogatory, flaming, sexist, and other related comments. These will not be tolerated. XDA is an international community, so respect each other.

XDA rules also require users to use the "Report Post" option when rule violations are suspected. "NOT" get involved in some sort of posting war. The only one that wins... is ME :laugh:

Now, with that said, and some knowledge passed about how a dev spends his/her day, I have taken the liberty to clean the posts involved in this topic. Sorry if you'rs got caught up in it, but I'm not going to pick and choose regardless of title. Related posts are deleted.

Other than "1" post that was out of line completely, I appreciate you all keeping it somewhat civil.:good:

Carry on and Cheers!

MD

 

[Tomsgt]

Just Tested on the XT1023 Moto E screen comes up but the touch controls do not respond. I adb reboot bootloader and restored stock recovery for now. thanks for your work on TWRP

 

[priyank.g]

Just Tested on the XT1023 Moto E screen comes up but the touch controls do not respond. I adb reboot bootloader and restored stock recovery for now. thanks for your work on TWRP

Hello , the opening post clearly states that you have to wait until the screen gets dim , then the touch works , did you try it or even read that?

 

[Tomsgt]

Hello , the opening post clearly states that you have to wait until the screen gets dim , then the touch works , did you try it or even read that?

Totally missed that thanks for the heads up. tested again and waited for the screen to turn off then turned it back on touch screen is working now.
so TWRP works on the XT1023 also

 

[priyank.g]

Totally missed that thanks for the heads up. tested again and waited for the screen to turn off then turned it back on touch screen is working now.
so TWRP works on the XT1023 also

No problem just hit the Thanks button

 

[cybojenix]

Sorry guys, I've been MIA for the past week. Just got round to building twrp with all the fixes done
http://d-h.st/oNJ
changes:

• touch bug fixed
• backlight bug fixed
• built against the latest caf kk_3.5 rb head (unreleased yet. I'll push it tomorrow hopefully)

it's still 2.7.0.0, I need to update the Slim repo.

Next thing to do is 2.7.1, and strip out the kernel so I can use a fast compression to speed up the boot sequence.

Simply out of curiosity (and to help with unifying), can people send me the output of this please (pastebin it)

adb shell getprop

I've checked, there's nothing personal on it.

Thanks.

 

[g33kparineeti]

Sorry guys, I've been MIA for the past week. Just got round to building twrp with all the fixes done
http://d-h.st/oNJ
changes:

• touch bug fixed
• backlight bug fixed
• built against the latest caf kk_3.5 rb head (unreleased yet. I'll push it tomorrow hopefully)

it's still 2.7.0.0, I need to update the Slim repo.

Next thing to do is 2.7.1, and strip out the kernel so I can use a fast compression to speed up the boot sequence.

Simply out of curiosity (and to help with unifying), can people send me the output of this please (pastebin it)

adb shell getprop

I've checked, there's nothing personal on it.

Thanks.

Thanks very much, working great on XT 1022.... The touch bug is no more there....
Sorry for 2 n00b questions, where will I get stock recovery??? need it for ota 4.4.3 update...
And will this get updated to v2.7.1.0 please???

btw, sorry @cybojenix for those ETAs about CWM...
This latest update has removed the need for CWM....:good: