[RECOVERY][Official] TWRP 3.4.0-6 [T83x][mtp][otg]

[speed_boy]

Btw, brightness is not working in twrp.

 

[Mentalmuso]

F###, thanks, bro.
Just flashed it as recovery and have this now.
Can you delete this suggestion? It should be flashed as Boot, GOD!

Flash as boot? What are you talking about? TWRP gets flashed to recovery.

Sent from my GM1915 using Tapatalk

 

[speed_boy]

Sh##. My fault. You was talking about kernel and then this message.
So anyway. Plz fix your manual because it is quite unclear how to flash kernel.

 

[enotar]

Hey Guys, please help if you can. T830
I did the update to Pie did not flash the complete firmware.
I OEM unlocked and now OEM unlock line is not in anymore in developer mode
I load in AP with ODIN last or 3.1.1 TWRP 3.3.0 tar file untick reboot
Start and got this;
I tried with different version of Odin ver 3.09 doesn't finnish and got stuck in Nand flash.
I also tried 3.2.1 same result


<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tablet say only valid firmware


Any idea?
Tablet reboot ok

 

[Mentalmuso]

Hey Guys, please help if you can. T830
I did the update to Pie did not flash the complete firmware.
I OEM unlocked and now OEM unlock line is not in anymore in developer mode
I load in AP with ODIN last or 3.1.1 TWRP 3.3.0 tar file untick reboot
Start and got this;
I tried with different version of Odin ver 3.09 doesn't finnish and got stuck in Nand flash.
I also tried 3.2.1 same result


<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Any idea?
Tablet reboot ok

You need to connect to internet, I know that much. The device will call back to Samsung servers.

I did have one instance where it took a few minutes before it showed up. I would flash the whole firmware though, is there a reason why you didn't?

Sent from my GM1915 using Tapatalk

 

[enotar]

You need to connect to internet, I know that much. The device will call back to Samsung servers.

I did have one instance where it took a few minutes before it showed up. I would flash the whole firmware though, is there a reason why you didn't?

Sent from my GM1915 using Tapatalk

Well I thought it was not necesary as I already had Pie plus I am traveling so trying to save some time.
But no I dit not connect to internet.
I will try tomorrow morning.
Thank you

Sent from my HMA-L09 using Tapatalk

 

[Mentalmuso]

Well I thought it was not necesary as I already had Pie plus I am traveling so trying to save some time.
But no I dit not connect to internet.
I will try tomorrow morning.
Thank you

Sent from my HMA-L09 using Tapatalk

Ah, already in pie then your fine.
It will be the not connecting to internet. You need to connect to WiFi somewhere and let it register

Sent from my GM1915 using Tapatalk

 

[enotar]

Ah, already in pie then your fine.
It will be the not connecting to internet. You need to connect to WiFi somewhere and let it register

Sent from my GM1915 using Tapatalk

Ok Ill try then and advise.
Thank you

Sent from my HMA-L09 using Tapatalk

---------- Post added at 07:17 PM ---------- Previous post was at 06:31 PM ----------

one more question:
Why connect the tablet to internet? When you go in Download mode the tablet doesn't recognize wifi or I am wrong.
And my computer is connected to internet so on this cas that should be something else.
Not sure...

 

[Mentalmuso]

Ok Ill try then and advise.
Thank you

Sent from my HMA-L09 using Tapatalk

---------- Post added at 07:17 PM ---------- Previous post was at 06:31 PM ----------

one more question:

Why connect the tablet to internet? When you go in Download mode the tablet doesn't recognize wifi or I am wrong.

And my computer is connected to internet so on this cas that should be something else.

Not sure...

Because the tablet boots, connects to internet, checks Samsung servers, disables the KG/RMM lock. This then enables the oem switch to be present in dev settings. This is all system and kernel stuff. With no switch present, it will trip KG/RMM causing an instance of needing to full wipe and flash back to stock. It's to protect an owner from theft of device and sensitive data.

That's all I know in a crude sense.

Sent from my GM1915 using Tapatalk

 

[enotar]

Success here so yes internet is needed.

All perfect, I apreciate the help.

Btw: you cannot get in DL mode with touch combination. You need to turn off the tablet press and hold vol up and vol down and connect the usb cable and wait for few seconds.

Sent from my HMA-L09 using Tapatalk

 

[gerabbi01]

Please tell me there's a way beyond this screen. Dire straits

Sent from my H8416 using Tapatalk

 

[Reuben_skelz92]

Please tell me there's a way beyond this screen. Dire straits

You can still get to download mode. Hold power until it turns off. Before it boots up plug in a cable connected to a PC or laptop while holding the volume down button

 

[gerabbi01]

You can still get to download mode. Hold power until it turns off. Before it boots up plug in a cable connected to a PC or laptop while holding the volume down button

Thank you. I've made it to download. My only option is restore to stock firmware? Or?

Sent from my H8416 using Tapatalk

 

[Reuben_skelz92]

Thank you. I've made it to download. My only option is restore to stock firmware? Or?

Yeah flash stock through Odin

 

[akmandal]

Will this work on the 837P Sprint version?

 

[Mentalmuso]

Success here so yes internet is needed.

All perfect, I apreciate the help.

Btw: you cannot get in DL mode with touch combination. You need to turn off the tablet press and hold vol up and vol down and connect the usb cable and wait for few seconds.

Sent from my HMA-L09 using Tapatalk

Not sure what you mean by touch combination?

Sent from my GM1917 using Tapatalk

 

[Mentalmuso]

Will this work on the 837P Sprint version?

I'm not sure whether you can unlock the bootloader on the sprint version? If you can then yes it will work.

Sent from my GM1917 using Tapatalk

 

[enotar]

Not sure what you mean by touch combination?

Sent from my GM1917 using Tapatalk

Hold power vol up and vol dwn

Sent from my HMA-L09 using Tapatalk

 

[neuer31]

@Mentalmuso
Sofar everything works (1 week use), I also finally got Galaxy Wearable working
Updated Magisk aswell, no problemo, except
Bluetooth is buggy (after disconnecting the device is ALWAYS forgotten), but you can get that fixed by downloading libsecure_storage ... by IanmacD on Magisk

Please tell me there's a way beyond this screen. Dire straits View attachment 4765477

Sent from my H8416 using Tapatalk

You can flash through Odin on this screen aswell. Had this aswell. Though if Odin fails the first time, just try again, but unplug and "restart" beforehand.
I had this about 4 times, 2 times I needed up to 3 attempts without it failing.

 

[gerabbi01]

Yeah flash stock through Odin

Just a quick note of thanks to all who've contributed to this project and the Tab S4. Thank you. I'm back up and running. Actually I was back up on Saturday but wanted to make sure everything was normal. Tab is doing it's job without a hitch. Thanks again.

Sent from my SM-T835 using Tapatalk