[RECOVERY][onyx] TWRP 2.8.7.0 touch recovery [2015-11-22]

Status
Not open for further replies.
Search This thread

h2o64

Senior Member
Aug 13, 2012
2,318
6,746
Paris
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

Phone look:


Tablet look:


CHANGELOG for 2.8.7.0:

-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)

Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.

System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.

resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.

This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.

CHANGELOG for 2.8.6.0:

-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)

CHANGELOG for 2.8.5.0:

-Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
-Backups can now be cancelled while the backup is in progress (does not include restore because we don't want to leave your device in a bad state)
-Improve thread handling and move input handling into the main rendering thread to improve stability
-Make MTP work even if unplugged and plugged back in
-Unify scrollable list code and make kinetic scrolling feel more natural
-Fix handling of mapped zip files for OTA updates (CM12 updater)
-USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
-Other small fixes and improvements

CHANGELOG for 2.8.4.0:

-Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
-Fix some MTP related crashes and bugs
-Eliminate TWRP toggling USB IDs during boot if MTP is enabled
-Fix various adb sideload issues
-Improve threading of actions
-Eliminate separate thread for screen timeout
-Update libblkid to 2.25.0
-Use power button as back button on watch themes for easier navigation
-Add mutex locking to data manager
-Improve custom theme handling on encrypted devices
-Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens

DOWNLOAD:
OnePlus X (All Variants) : http://ns336247.ip-91-121-110.eu/h2o64/onyx/twrp/

BUGS:
If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!

SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.


XDA:DevDB Information
[RECOVERY][onyx] TWRP 2.8.7.0 touch recovery [2015-11-22], Tool/Utility for the OnePlus X

Contributors
h2o64, Quasar

Version Information
Status: Stable
Current Stable Version: 2.7.8.0
Stable Release Date: 2015-11-22

Created 2015-11-19
Last Updated 2015-11-22
 

RinoFxx

Senior Member
Jun 17, 2015
136
45
I'm on first twrp version but it freezes everytime i try to exit! Can i flash this from flashify or only via fastboot?

Inviato dal mio ONE E1003 utilizzando Tapatalk
 

h2o64

Senior Member
Aug 13, 2012
2,318
6,746
Paris
Thanks! @h2o64 Can you please upload the source code on for example Github?
I'll link it to the OP as soon as I can but you can find the sources quiet easily on my github
Themes for this build can be found at https://s.basketbuild.com/devs/z31s1g/1080/TWRP 287X_v1

The OP for which is found at http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584

I take no credit for these. Just informing newbies ;)
Are you (users) interested in a themed version by default? Just like I did on Moto G?
 

taaeem

Senior Member
Feb 22, 2014
1,013
642
Hamburg
I'll link it to the OP as soon as I can but you can find the sources quiet easily on my github

Are you (users) interested in a themed version by default? Just like I did on Moto G?

Okay found the sources :p
Is there a possibility that this will get to a official state?
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 86
    Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

    Phone look:


    Tablet look:


    CHANGELOG for 2.8.7.0:

    -Initial ground work for software drawn keyboard (_that)
    -Fix handling of wiping internal storage on datamedia devices (xuefer)
    -Allow DataManager to set and read values from the system properties (xuefer)
    -Fix crash when taking screenshots on arm64 devices (xuefer)
    -Fix error message after an ORS script completes (Dees_Troy)
    -Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
    -Add system read only option – more details below (Dees_Troy)
    -Add resize2fs and GUI option to run resize2fs (Dees_Troy)
    -Fix crash loop caused by empty lines in AOSP recovery command file (_that)
    -Prevent duplicate page overlays such as multiple lock screens (mdmower)

    Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.

    System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.

    resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.

    This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.

    CHANGELOG for 2.8.6.0:

    -Fix daylight savings time rules for USA and Europe (_that)
    -Allow mulitple overlays for popup boxes (Dees_Troy)
    -Add pattern style password entry for decrypt (Tassadar)
    -Keyboard improvements (_that)
    -Update AOSP base to 5.1 (Dees_Troy)
    -Reduce theme count to 5 and rely on scaling (Dees_Troy)
    -Various scaling improvements (Dees_Troy)
    -Improved handling of resources in the GUI (_that)
    -Make scroll bar size proportional to list size (_that)
    -Allow scoll lists to render without a header (_that)
    -Make console scroll per pixel with kinetic scrolling (_that)
    -Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
    -Various other fixes and improvements (mdmower, bigbiff, codelover, etc)

    CHANGELOG for 2.8.5.0:

    -Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
    -Backups can now be cancelled while the backup is in progress (does not include restore because we don't want to leave your device in a bad state)
    -Improve thread handling and move input handling into the main rendering thread to improve stability
    -Make MTP work even if unplugged and plugged back in
    -Unify scrollable list code and make kinetic scrolling feel more natural
    -Fix handling of mapped zip files for OTA updates (CM12 updater)
    -USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
    -Other small fixes and improvements

    CHANGELOG for 2.8.4.0:

    -Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
    -Fix some MTP related crashes and bugs
    -Eliminate TWRP toggling USB IDs during boot if MTP is enabled
    -Fix various adb sideload issues
    -Improve threading of actions
    -Eliminate separate thread for screen timeout
    -Update libblkid to 2.25.0
    -Use power button as back button on watch themes for easier navigation
    -Add mutex locking to data manager
    -Improve custom theme handling on encrypted devices
    -Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens

    DOWNLOAD:
    OnePlus X (All Variants) : http://ns336247.ip-91-121-110.eu/h2o64/onyx/twrp/

    BUGS:
    If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!

    SUPPORT:
    Live support is available via #twrp on Freenode with your IRC client or just click this link.


    XDA:DevDB Information
    [RECOVERY][onyx] TWRP 2.8.7.0 touch recovery [2015-11-22], Tool/Utility for the OnePlus X

    Contributors
    h2o64, Quasar

    Version Information
    Status: Stable
    Current Stable Version: 2.7.8.0
    Stable Release Date: 2015-11-22

    Created 2015-11-19
    Last Updated 2015-11-22
    8
    New build !

    I updated the build, now it should flash stock firmware.
    6
    Thanks! @h2o64 Can you please upload the source code on for example Github?
    I'll link it to the OP as soon as I can but you can find the sources quiet easily on my github
    Themes for this build can be found at https://s.basketbuild.com/devs/z31s1g/1080/TWRP 287X_v1

    The OP for which is found at http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584

    I take no credit for these. Just informing newbies ;)
    Are you (users) interested in a themed version by default? Just like I did on Moto G?
    6
    I've updated my rooting guide with this recovery. Thanks! :good:
    4
    I just downloaded it, but how do I install it?

    Type fastboot flash recovery recoveryname.img in the terminal. Traditional fastboot method.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone