[Recovery[[Root][32/64-bit] TWRP 3.2.1-0 For LG K20 Plus (TP260 & MP260)

[Travisholt92]

*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.

WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.

Supported Models :
TP260 & MP260

Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED

How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]

-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW

How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal

ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]

WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.

BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!

Use the hard keys to select "YES" and then "YES" again to boot into TWRP

How to Disable encryption and flash super su [Install Root]:

1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS or T-Mobile splash screen but don’t worry this is expected.

Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]

Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.

Credits: Myself, Messi2050, and Teamwin

If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.

A note from Messi2050

Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050

EDIT: So i messed up and apparently uploaded the 32bit TWRP by mistake and haven't built a bootable 64bit twrp in a while. I've been debugging building a 64bit TWRP based on an Oreo kernel.
I have uploaded RedWolf recovery which supports both 32bit and 64bit I'm sure of it this time. Sorry for the inconvenience and being a real d!^k to anyone who brought up having error 255 when flashing 64 bit builds in TWRP. This redwolf recovery will resolve such issues.

 

[Travisholt92]

RESERVED

 

[kalel420]

*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.

WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.

Supported Models :
TP260 & MP260

Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED


-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW

How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal

ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]

WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.

BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!

Use the hard keys to select "YES" and then "YES" again to boot into TWRP

How to Disable encryption and flash super su [Install Root]:



Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]

Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.

Credits: Myself, Messi2050, and Teamwin

If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.

A note from Messi2050

Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050

The download link is set to private need permission to dl.

 

[Travisholt92]

The download link is set to private need permission to dl.

It should be good to go now. I thought I had turned link sharing on. Apparently not.

 

[quickslay15]

I keep getting stuck. When i wipe with twrp and reboot to recovery and enable mtp it doesnt show up on my computer. I went to devies and printers to try to update usb composite device but the usb composite device doesnt show up under hardware. Only the adb device does

 

[Travisholt92]

I keep getting stuck. When i wipe with twrp and reboot to recovery and enable mtp it doesnt show up on my computer. I went to devies and printers to try to update usb composite device but the usb composite device doesnt show up under hardware. Only the adb device does

Do you have the lg drivers installed? It works for me on both Ubuntu and Windows 10

 

[Travisholt92]

There is a 64bit TWRP available on the link in the OP. If your phone won't charge with 64bit TWRP, please stick with 32bit software until the issue is resolved. I have very little information on this, it happens on some TP260 and MP260 devices. Also Double tap to wake also doesn't work for some on 64 bit. There appear to have been multiple display models used in this device. It's not clear what other parts could be different and if that could be a factor. Hopefully we can resolve this issue soon. But I'm fairly clueless at this point. I tried updating my kernel to 10w and adding just dt2w and 64bit commits with no luck.

 

[lgmp260owner]

Looking to install a multiple rom manager..Spent hours going in circles. Tried Rom Manager but it doesn't seem to work right. Ideas?

 

[Travisholt92]

64bit charging now works for all. Thank @messi2050 for the charging fix.

 

[Deydacar3]

twrp

*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.

WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.

Supported Models :
TP260 & MP260

Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED


-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW

How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal

ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]

WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.

BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!

Use the hard keys to select "YES" and then "YES" again to boot into TWRP

How to Disable encryption and flash super su [Install Root]:



Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]

Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.

Credits: Myself, Messi2050, and Teamwin

If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.

A note from Messi2050

Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050

Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.

---------- Post added at 05:02 AM ---------- Previous post was at 04:13 AM ----------

Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.

I apologize, I was able to go into recovery and do the rest of the steps. A thousand thanks to the creator of this tutorial!

 

[Travisholt92]

Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.

---------- Post added at 05:02 AM ---------- Previous post was at 04:13 AM ----------



I apologize, I was able to go into recovery and do the rest of the steps. A thousand thanks to the creator of this tutorial!

Good to hear that you managed to get it working

 

[thrasher194com]

Reflashed mp26010j in lgup, flashed twrp3.2.1.0 in fastboot. Nadroid restored mp26010v. Thanks @Travisholt92

Sent from my LG K20 Plus using XDA Labs

 

[Travisholt92]

I'll have an updated twrp up within the next day with proper sdcard functionality.

 

[Deydacar3]

system update

Hi, guys. I have a system update, can I update it with twrp? if not, how do i remove the update notification?

 

[Travisholt92]

The newly updated TWRP is now available for download on my google drive. (link is in the OP)
Also to avoid future confusion I have removed the 32bit specific TWRP from Google Drive. Next step will be Official status.

 

[thrasher194com]

Hi, guys. I have a system update, can I update it with twrp? if not, how do i remove the update notification?

Do not take official mp26010x, OEM unlock in Dev option is grayed out. Use the LG UP to flash kdz to mp26010j, then flash fastboot twrp3.2.1-0(64bit).
Profit!! ;]

Just ignore or disable ota notices.

Sent from my LG K20 Plus using XDA Labs

 

[thrasher194com]

Anyone can flash in twrp official app.. don't worry about device, just find twrp.img and flash. To easy. Thanks again @Travisholt92

Sent from my LG K20 Plus using XDA Labs

 

[thrasher194com]

Anyone can flash in twrp official app.. don't worry about device, just find twrp.img and flash. To easy. Thanks again @Travisholt92

@Travisholt92, I had to reflash back to 4/8 twrp64.. the update was very glitchy..

Sent from my LG K20 Plus using XDA Labs

 

[Travisholt92]

@Travisholt92, I had to reflash back to 4/8 twrp64.. the update was very glitchy..

Lack of touch? I fixed it already and reuploaded

 

[thrasher194com]

Lack of touch? I fixed it already and reuploaded

It seemed the twrp bootscreen had hiccups, and so did reboot system.

Sent from my LG K20 Plus using XDA Labs