[Recovery] & [Root]【T210R & T210】 TWRP 3.0.0-0 [Unofficial]

[fortes]

Hi, I am in big trouble.
I installed [SM-T11x] TWRP 2.6.3.0 for Tab3 on T-210R! Instalation was succesfull, original rom was working, until I turn off device. Combination of free buttons don't work. Is it bad?

 

[[email protected]]

Updated to TWRP 3.0.0-0 on Feb 13, 2016.

NOTE: The MTP feature of TWRP causes issues with ADB access while in recovery. You may need to toggle "Disable MTP" a from the "mounts" menu to get ADB access.

TWRP does occasionally give a "failed to mount /system" error. If you get this error, simply reboot recovery and it should work.

Now properly supports all set_metadata functions in newer updater-scripts.

Click HERE to download the latest version.

@ketut.kumajaya has provided us with a working zImage which I combined with his previous TWRP attempts to make this recovery.

Please report any bugs here in this thread.

Please take a moment to say thanks and/or donate to @ketut.kumajaya for helping us out.

I have a T210R, so I haven't tested on a T210.

Thank you to everyone who has (and still will) help in testing!!!!


Credits go to:
@ketut.kumajaya for getting this initially working (see THIS post)
@Jamison904 for giving us root
@hkjr for getting ketut to help
and of course the Team Win group
@Tomsgt for the video

Link to kernel source https://github.com/kumajaya/android_kernel_samsung_lt02

Watch THIS VIDEO tutorial for a step by step visual guide for performing the instructions listed below (thanks @Tomsgt for the video).


Supplied in 3 formats:

• Odin flashable tar.md5 (for first time installation)
• Recovery flashable zip (requires a custom recovery to currently be installed)
• .img file (for those who use Flashify or other direct methods).

Instructions for ODIN: (use the one with "tar" in the name)
1. Download ODIN on your computer.
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program. Un-check Auto Reboot. See notes about ODIN below.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
7. Select "PDA" then choose the recovery file you want to flash.
8. Hit "START". Wait for Odin to finish (~10-15 seconds). The message area will display "RES OK" when finished.
9. Restart directly to recovery mode before rebooting into OS.(Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen).

After you get the custom recovery working, you can flash the latest SuperSu zip to get root.


Internal card gets mounted as "/data/media". You'll have to hit "up a level" on the folder list on the left to find it.

Notes about ODIN
--Make sure that "Re-Partition" is NOT checked.
--Auto Reboot can be un-checked if TWRP doesn't flash correctly on your device. Some have reported that un-checking Auto Reboot fixes this issue. If you un-check Auto Reboot, you will need to reboot the device yourself (refer back to step 10).


Instructions for recovery flashable version:

1. Boot into your previously installed custom recovery.
2. Select the Install Zip option.
3. Find the recovery zip.
4. Flash.
5. Reboot recovery.
6. Enjoy your new recovery.

Flash at own risk!!!!

+++++++++++++++++++++++++++++++



+++++++++++++++++++++++++++++++
DOWNLOADS

Click HERE to download the latest version.

twrp 3.0.2 has been released please build it

 

[AndroidFL]

gr8nole please make a cm 12 or cm13 rom for this device i am waiting because i tried many times but i couldnt make a port of any rom please make it

 

[PiperBen85]

Just installed TWRP 3.0.0. on my daughters SM-T2105 and successfully ROM'd it with StockRom Series Ultimate Edition!!! Thanks Gr8nole!!! You helped bring life back to my 8 y/o's poor little tablet!

 

[PixelBoot]

Perfect!

I was going to install a Custom ROM to my Samsung Galaxy Tab 3.7.0 and I had no recovery in my mind.
Now I run the best Recovery that is TWRP and thanks to this recovery my Tab 3.7.0 is much faster thanks to the recovery and the ROM.
I really appreciate it.



Thanks a lot! Keep up the good work!

---------- Post added at 09:01 AM ---------- Previous post was at 08:59 AM ----------

gr8nole please make a cm 12 or cm13 rom for this device i am waiting because i tried many times but i couldnt make a port of any rom please make it

I agree aswell!
I've been looking for a good ROM for SM-T210 and if you can make it happen you will make my day. :laugh:
Thanks for Listening

 

[m.mohtashimsadiq]

Hard Bricked Tablet

I have a samsung galaxy smt210r and I tried installing a stock firmware after installing a custom one.
I used this post to install it.
https://forum.xda-developers.com/sho....php?t=2459734

But I don't know if something went wrong and now the tab won't display anything. Hopefully I can get into the odin mode and odin is recognizing but now i can't flash another firmware because it needs a pit file to partition something.

I downloaded a pit file from this link
https://forum.xda-developers.com/sho....php?t=2722948

But still i still can't get it to work somehow.

Any help?




<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


ODIN MODE
Product Name: SM-T210R
Current Binary: Samsung Official
System Status: Custom
HW: 0*5

 

[gr8nole]

I have a samsung galaxy smt210r and I tried installing a stock firmware after installing a custom one.
I used this post to install it.
https://forum.xda-developers.com/sho....php?t=2459734

But I don't know if something went wrong and now the tab won't display anything. Hopefully I can get into the odin mode and odin is recognizing but now i can't flash another firmware because it needs a pit file to partition something.

I downloaded a pit file from this link
https://forum.xda-developers.com/sho....php?t=2722948

But still i still can't get it to work somehow.

Any help?

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


ODIN MODE
Product Name: SM-T210R
Current Binary: Samsung Official
System Status: Custom
HW: 0*5

Use Odin v3.07

 

[m.mohtashimsadiq]

Wow! You actually replied? That is kind of you. God bless you.

Tried all three of the odins. Still no luck.
even tried three different pit files from the internet.

With pit file.

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210_CWM_6.0.4.9.KK.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)





Without pit file.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210_CWM_6.0.4.9.KK.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

 

[gr8nole]

Wow! You actually replied? That is kind of you. God bless you.

Tried all three of the odins. Still no luck.
even tried three different pit files from the internet.

With pit file.

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210_CWM_6.0.4.9.KK.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)





Without pit file.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210_CWM_6.0.4.9.KK.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

You could try installing the full firmware. Other than that, not sure what else would work. You can find the full firmware on sammobile.com.

Sent from my SM-G920V using Tapatalk

 

[m.mohtashimsadiq]

You could try installing the full firmware. Other than that, not sure what else would work. You can find the full firmware on sammobile.com.

Sent from my SM-G920V using Tapatalk

Did that too.
The problem isn't that it's just that I can't seem to partition the damn thing with anything.
Oh Well! Thanks a lot though.


PS: I am afraid to root my s7 now.

 

[Jk rockz]

Is it work for t211

 

[coldtoon]

please oh please

will you be updating the recovery?

 

[JT1510365]

will you be updating the recovery?

i believe gr8nole is either taking a break from this tablet development or he has completely stopped development for this tab

 

[kabadisha]

Just wanted to bump this thread let anyone reading that I just did this on a friend's old SM-T210 and it worked great.

Had to find a new link for super-su though: http://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip

Thanks!

 

[xdausernl]

What is your build number?
Are you rooted already?

Try flashing it in Odin with auto reboot NOT checked. Then boot straight into recovery when it is finished flashing.

Not sure if that will help or not, but I read it somewhere.

Sent from my SM-T210R using xda app-developers app

I have the exact same problem with my SM-T210 Tab3, build number: kot49h.t210xxbob1 and the device is rooted by Kingoroot.
Even the suggestions 'auto reboot' NOT checked, and then straight into recovery when it's finished, didn't do the trick.

 

[Hamburml]

Did that too.
The problem isn't that it's just that I can't seem to partition the damn thing with anything.
Oh Well! Thanks a lot though.


PS: I am afraid to root my s7 now.

Great... I have the same on my SM-T210 ... I saw JASBR, flashed it, got a black screen after setup, thought about "did I have a kitkat firmware?", flashed the full firmeware "T210XXBPA1_T210DBTBOA1_HOME.tar.md5" via odin and now I always get "There is no PIT partition"... Device looks like dead :/ Any advice? Can I install Samsung Kies and recover it with that?

 

[mrmirrorthedrummer]

Hi,

I hope this thread is not closed.

I have a samsung galaxy tab 3 SM T311, and I would like to install a custom rom.

Hence, I flashed TWRP with odin.

Everythying is absolutely fine with odin, or at least it seems so. The flashing process is marked as ”passed” from odin. I have odin version 3.14.4

However, I cannot proceed further. Here it is exaclty what happens:

Once I close odin, I unplug the usb cable, I hold on POWER+VOLUME UP+HOME until the tablet reboots.

As soon as the samsung logo appears, I release just the power button but I keep pressing on HOME + VOLUME UP to enter recovery mode. And......nothing happens. The device is just stuck on samsung logo and it stays in this condition; releasing all the buttons and/or pressing them again does not help.

If, from this condition, I just hold the power button, I can reboot the device normally to the original stok. Obviously then I have to reflash TWRP again and so on...

Any Idea on how to fix this and enter TWRP mode?

Three additional info:

normally, when I turn the tablet on, the samsung logo appears and the system is booted.

Now I noticed one thing: after the tablet is stuck on the logo, if I reboot, the screen goes black, samsung logo appears again, then screen black again, then logo again, then normal boot. So it looks like there is some kind of attempt to boot that succeds only the second time. Once it is succesfully rebooted, it goes back to normality. I don’t know whether tihis info it useful or not.

Another info: I tried with different TWRP versions. When I follow the posted link to download TWRP, there are several versions available. I tried with both T110.TWRP.2.7.0.1.tar.md5 and T210.TWRP.3.0.0-0.tar.md5 (the oldest and the most recent), but no difference. Am I doing something wrong here?

Last info: this tablet was purchased by my parents long time ago through a telephone service provider (like vodafone). When I turn the tablet on, after the samsung logo, the logo of the company appears. In the system there is also plenty of their crappy old apps (besides the samsung ones), that cannot be uninstalled. I am wandering whether having such a system installed adds somehow an extra layer of protection that prevents TWRP from running.

Any advice is greatly appreciated. thank you in advance

 

[MarkILab]

Hi,

I hope this thread is not closed.

I have a samsung galaxy tab 3 SM T311, and I would like to install a custom rom.

Hence, I flashed TWRP with odin.

Everythying is absolutely fine with odin, or at least it seems so. The flashing process is marked as ”passed” from odin. I have odin version 3.14.4

However, I cannot proceed further. Here it is exaclty what happens:

Once I close odin, I unplug the usb cable, I hold on POWER+VOLUME UP+HOME until the tablet reboots.

As soon as the samsung logo appears, I release just the power button but I keep pressing on HOME + VOLUME UP to enter recovery mode. And......nothing happens. The device is just stuck on samsung logo and it stays in this condition; releasing all the buttons and/or pressing them again does not help.

If, from this condition, I just hold the power button, I can reboot the device normally to the original stok. Obviously then I have to reflash TWRP again and so on...

Any Idea on how to fix this and enter TWRP mode?

Three additional info:

normally, when I turn the tablet on, the samsung logo appears and the system is booted.

Now I noticed one thing: after the tablet is stuck on the logo, if I reboot, the screen goes black, samsung logo appears again, then screen black again, then logo again, then normal boot. So it looks like there is some kind of attempt to boot that succeds only the second time. Once it is succesfully rebooted, it goes back to normality. I don’t know whether tihis info it useful or not.

Another info: I tried with different TWRP versions. When I follow the posted link to download TWRP, there are several versions available. I tried with both T110.TWRP.2.7.0.1.tar.md5 and T210.TWRP.3.0.0-0.tar.md5 (the oldest and the most recent), but no difference. Am I doing something wrong here?

Last info: this tablet was purchased by my parents long time ago through a telephone service provider (like vodafone). When I turn the tablet on, after the samsung logo, the logo of the company appears. In the system there is also plenty of their crappy old apps (besides the samsung ones), that cannot be uninstalled. I am wandering whether having such a system installed adds somehow an extra layer of protection that prevents TWRP from running.

Any advice is greatly appreciated. thank you in advance

ok, so how do i explain this?

your tablet (a sm-t310 with an 8-inch display) is incompatible with twrp for this tablet (a sm-t210 with a 7-inch display) so, unfortunately, this is not the right forum for you, please head here to find twrp for your tablet

 

[mrmirrorthedrummer]

ok, so how do i explain this?

your tablet (a sm-t310 with an 8-inch display) is incompatible with twrp for this tablet (a sm-t210 with a 7-inch display) so, unfortunately, this is not the right forum for you, please head here to find twrp for your tablet

man, thanks. thank you so much. I really mean it. I had been searching for all possible explaination and the answer was in front of my eyes.

I managed to install everyting. it took about 25 min.
thank you once again

 

[beckham2323]

hello twrp 3.0. I installed the version, but I can neither install a rom, nor can I root another. Even when I delete the files, the files come back when the tablet restarts by itself. It doesn't show up even when I install the original recovery. Has anyone encountered such a problem? I flashed a stock rom with odin, but it didn't fix even though it was installed. I throw stock rom, but twrp 3.0 is not going.